Diggro S2 User manual

User Manual
Smart Bracelet
S2

English - - - - - - - - - - - - - - 1—15
日本語 - - - - - - - - - - - - - - 16—27
Deutsch - - - - - - - - - - - - - 28—44
Français - - - - - - - - - - - - - 45—60
Español - - - - - - - - - - - - - - 61—75
Italia - - - - - - - - - - - - - - - - 76—91

Thanks for using our product. Before using this watch, please
read the following instructions first:
1.Warning: Please consult your doctor before starting a new
exercise. The smart watch has no medicinal use anyway,
though it can monitor your real-time heart rate dynamically.
Remember to consult your doctor before starting any exercise
and dieting program.
2.Device requirement: This watch supports Android 4.3,
IOS7.0, and Bluetooth 4.0 or above.
3.Charging: Before using the watch, please charge it with a
5V500mA USB device to ensure that it is full of electricity.
To charge the watch, remove its main unit from your wrist and
place it on the USB charging base (5V500MA), Keep the main
unit on the charging base at least 2 hours. To ensure good
contact during charging, the metal contact should be free of
contamination, oxidation, and impurities. During charging, a
symbol will be displayed on the screen to indicate the
charging progress. If you keep the watch idle for a long time,
please recharge it at least once every 3 months.
Product 1 charging schematic diagram
- 1 -
1、Unlock the buckle and select the opposite side of the
touching key
2 、One hand hold the bracelet body, and another hand
hold the srap to extract the strap.
3 、Choose the USB terminal to charge, phone charger,
laptop USB
port are all compatible.(Charge time: 2-3 H)

Product 2 charging schematic diagram
- 2 -
Touch the keys
1.Take out the bracelet,Unlock the buckle and turn over the
strap.
2.Press down the touching key terminal to extract
the bracelet
3 . Choose the USB terminal to charge, phone
charger, laptop USB port are all compatible.(Charge
time: 2-3 H)
Connect the Watch To The App On Your Phone
1.Power on: Long press the bottom of the watch screen for
3 seconds, and the watch will be powered on and a pairing
code will be displayed on the screen to identify the watch.
Power off :Long press the button on the time interface for 3
seconds to enter the secondary menus, and browse through
these menus to switch to the Power Off option. Long press this
option to enter the Power Off interface. On this interface,
switch from ON to OFF and the numbers 5, 4, 3, 2, 1 will be
displayed on the screen. After the number 1 is displayed, the
watch will be powered off.
Reset: Among the secondary menus,
select the Reset
icon and long press it to enter the Reset
interface. On this interface, switch from Off
to On, and the system will be reset and the
time and data of the watch will be reset to
the factory settings.

- 3 -
2.Install the app :Scan the QR code on
the packing box with your phone, or
search for "Smart Wristband" on Google
Play, App store, or Myapp store and
download it. Keep your watch close to your
phone, and start and enter the smart
watch APP . According to the APP
connection wizard, find the bluetooth
watch (the bluetooth name is "Smart
Watch") and finish pairing. Then, click
Next to finish connection.
3.Connect to Apple devices: For the
IOS of Apple devices, a bluetooth pairing
request will be displayed after you
successfully connect to the App for the
first time . To receive such notifications
as incoming calls, SMS, QQ, and
Wechat from the IOS on your watch,
click Pair. Otherwise, you will unable to
receive such notifications.
4.Delete the watch: To delete the
watch after connecting it to your phone,
open the APP and choose Setting > My
Watch. If you have registered an account
and logged in to the account to bind your
watch, you need to unbind it by opening
the App and choose Setting > Device
Management.
5:Delete the watch on an Apple device:
After deleting the watch according to the
steps above, choose System > Bluetooth
on your phone after being prompted to do so. Then, press the
exclamation mark after the device name and select Neglect
the Device on the popup dialog box. By doing so, you remove
the ANCS connection of the watch and you will no longer
receive any notification from Apple.
Note: When connecting the watch to the APP for the first time,
be sure allow the APP to obtain the related permissions. If you

- 4 -
Function area on the main interface
Function area on the main interface
1.Time mode:After you successfully pair your watch with the
APP for the first time, the watch will synchronize its time and
date with your phone.
2.Step-counting mode:The watch is in step-counting mode by
default when powered on. With the watch on your wrist, if you
walk and swing your arms, the watch will record your motion
data which you can view immediately.
3.Riding mode: On the bicycle interface, if you
long press the button for 3 seconds, you will enter
the riding mode. In this mode, the watch will
record your riding time . If you ride, the watch will
display the time . If you do not ride, the watch will
not record the time. In the riding mode, the watch
consumes more power and thus its battery life
will be shortened.press the button there seconds
exit the riding mode.
4.Heart rate detection: On the heart
rate detection interface, if you long
press the button, you can use the
heart rate detection function to detect
your real-time heart rate dynamically.
ULNA
forbid the APP to obtain your phone' s permissions, some
functions between the watch and phone may be disabled.

- 5 -
In the heart rate detection mode, the watch's battery life will
be shortened.To exit the heart rate detection mode, long press
the button for 3 seconds in the heart rate detection mode.
4.1 Please put on your watch on your wrist, 2cm from the
inside of your ulnaradius joint.
4.2 When measuring your heart rate,keep the heart rate
sensor clung to your skin and in good contact.Otherwise, the
light of the sensor may leak and the measurement data may
be incorrect.Do not look directly at the green light of the sensor,
which may cause discomfort to your eyes.
4.3 Though this watch can detect your real-time heart rate
dynamically, you are still recommended to keep still during
heart rate detection. Otherwise, it may take a longer time to
measure the heart rate or you may get incorrect data. After
the watch has measured the data, you can do exercise again
and view the dynamic data.
4.4 If great difference exists between measurements, please
have a rest and make another measurement. If you make 5
successive measurements and take their average value,you
will get a correct result.
4.5 This watch measures your heart rate dynamically. Thus,
it gives different heart rate values when you are in different
states (talking, eating, and drinking). The real heart rate value
depends on the actual situation.
4.6 After connecting your watch to the APP, you can set the
maximum heart rate warning value and synchronize it to your
watch. Then, when the heart rate value on your watch reaches
the maximum heart rate value, your watch will vibrate to give a
prompt and at the same time, the heart rate value will flash,
telling you to stop intensive exercise.
4.7 If you are not clear of your maximum or minimum heart
rate, please consult your doctor before taking exercise.
4.8 Before making a measurement, ensure that there is no
contamination at the bottom of the heart rate sensor. Such
factors as skin color, thick hair, tattoo, and scar may affect the
detection result.
4.9 This heart rate detector works according to the PPG
measurement principle. Therefore, its precision may vary with

- 6 -
the physiological factors (blood circulation, blood pressure,
skin conditions,blood vessel location and density) which affect
light absorption and reflection. When the measured heart rate
value is very great or very small, the measurement value may
be incorrect and you need to make another measurement.
4.10 Long-time measurement may cause the watch to get
hot. If this makes you uncomfortable, you can take the watch
off your wrist and wear it again after it has cooled down.
4.11 You are recommended to make measurement when it
is warm because cold weather may affect the measurement
result. Function menu: In the time mode, long press the button
for 3seconds to enter the interface for secondary menus. This
interface provides the following buttons: Back, Remote-control
music, Remote-control photo, Find your phone, Vibration
on/off, Power off, and Reset.
1.Back: This button allows you to return to the main
interface by long pressing it for 3 seconds.
2.Remote-contro music: This button allows you to enter
the music play interface where you can control the music player
of your phone to play/pause music, play the previous and next
song. (Support only the playing of the music in the system).To
return to the previous page,long press the Back button.
3.Remote-control photo and video : This button allows
you to enter the interface for remote control photo or video,
where you can enable the APP to start the built-in camera of
the system to take photos by long pressing this button.If you
have selected remote-control video, the watch will start to take
videos after you press this button for the first time and stop to
take videos after you press this button again. If you long press
this button, you exit the photo mode.
4.Find your phone: This button allows you to active the
function to find your phone by long pressing it for 3 seconds.
If you press this button, you will hear a ring tone (if the volume
of ring tone is on) which help you to find your phone. Phone

- 7 -
App Functions And Settings
vibration is not supported. Long press this button, and you will
exit this function.
5.Vibration on/off: This button allows you to enter the
interface for switching on or off vibration by long pressing this
button. By default, vibration is ON. When vibration is in OFF
state, the watch does not vibrate no matter what notification is
recei ved.
6. Palming screen - on : If you enable this function,the screen
of the watch will light up automatically when you
raise you wrist to help you view the time.
1.Main interface
The main interface displays the data about step counting,
distance, and calories you have burned. The buttons on the
upper right corner of this interface allow you to synchronize
and share history data. By clicking the heart-shaped icon in
the center, you can perform a heart rate test. The APP will
measure and record your current heart rate data. Once the
detection at the APP end is finished, the heart rate
detection will stop automatically.
By clicking the Setting icon on the upper right corner, you can
set the heart rate warning (vibration) switch and the heart rate
warning threshold. Then, after you synchronize this setting
to the watch, the watch will vibrate and the heart rate value
measured will flash when the maximum heart rate is reached.
2.Trend
After synchronizing the history data, you can view the
exercise record of each day, each month and each year on
the daily records. You can also view the data about step
counting, distance, calories you have burned, and the
goal you have achieved.
After synchronizing the history data, you can also view the
data about your sleeping quality and the related history

- 8 -
Interface for function setting
records.(Sleep Monitor: The bracelet will monitor sleep
automatically, please check the sleep quality and sleep time
after the data is synchronized.)
3.Outdoor exercise
Enable the GPS on your phone, enable the network connection,
and open the map built in the APP, and you can record your
movement and share it to social platforms.
4.Multi-exercise mode
1)Rope skipping: Click this icon and START to start rope
skipping and FINISH to stop rope skipping, then the watch will
record the number of rope skippings
2)Jumping jack: Click this icon and START to start jumping jack
and FINISH to stop jumping jack, then the watch will record the
number of jumping jacks
3)Sit up: Click this icon and START to start sit up and FINISH
to stop sit up, then the watch will record the number of sit ups
4)Treadmill: Click this icon and START to start treadmill
exercise and FINISH to stop treadmill exercise, then the watch
will record the distance you have covered
When the multi-exercise mode is on, the watch will display the
corresponding exercise icons. To exit this mode, exit the APP
or long press the Multi-exercise mode button.
5.1 Personal information:
After enter the APP, ou are ecommended to set your personal
information first by choosing Setting > Personal Information.
The personal information you can set includes nickname, head
portrait, gender,date of birth, height, weight, step pitch, and unit
(metric/imperial). After finish settings, you can synchronize
your personal information to your watch.
If this is the first time for you to use this APP, you are
recommended to register an account with your email address

- 9 -
and log in to the account. Also, you can have a try without a
login. If you have registered an account but forget the
password, you can click Forget Password, and the system will
send a mail to your register email for you to reset your
password.
5.2 Exercise goal: This function allows you to set your exercise
goal.
5.3 Phone anti-lost: This function allows you to set anti-lost for
your phone. By default, this function is disabled (grey).If you
enable this function, your watch will vibrate to give a prompt
when your phone or watch is beyond the bluetooth connection
distance.
5.4 Music remote control: This function allows you to control
(to play, pause, play the previous song, play the next song) the
music on the phone via your watch. (The music player
attached with the system is supported)
5.5 Remote-control photo: This function allows you to switch
on or off the photo function of the APP.
5.6Call notification:If you enable this function, you will receive
a notification when a call from one contact in the default
system address book is coming. You will receive no
notification, however, when a call from one contact in the
third-party address book is coming.
5.7 SMS notification:If you enable this function, you will
receive a notification when a system SMS is received and you
can view the SMS. You will receive no notification, however,
when an SMS from a third-party application is received.
5.8 QQ notification: If you are using an Android device and
enable this function for the first time, the system will prompt
you to enable access notification permission to allow your
watch to read all system notifications and to check this APP.
You are recommended to check access no tification
permission for only one APP. If you check access notification
permission for multiple APP s , you may receive no notification.
5.9 WeChat notification: If you enable this function, you can
receive WeChat notifications and view the content of the
notifications. This applies to other notifications.Notification
from foreign social applications: This watch supports the

- 10 -
notifications from such foreign social applications as Facebook,
Twitter, Line, SKYPE, and WhatApp and displays the content of
such notifications
When a notification is received, the watch will display the icon
of the corresponding social application. You can click this icon
to view the message or long press this icon to exit.
For IOS, all notifications are uniformly pushed by the notification
center.
5.10 Alarm clock notification: This function allows you to set an
alarm clock for 4 periods, and set an on-off, snooze time,and
alarm cycle for each alarm clock. After finishing setting, click
Synchronize to Device to bring your setting into effect. This
function supports offline notification.
5.11 Long-time sitting notification: This function allows you to
set an on-off, notification interval, notification time segment,
and notification period.
5.12 My watch: This function allows you to search for or add a
watch.
5.13 Find watch: Click Start to find the watch you have bound
it to your phone. If the watch is found, it will vibrate to prompt
you.
5.14 Device management: This function allows you to manage,
uninstall, and rename the watch you have bound.
5.15 Clear data: This function allows you to clear the data on
your watch and the APP.
5.16 User manual: This function allows you to view the help
information about the use of the watch
5.17 Device update: This function allows you to update the
watch software.
5.18 About: This function allows you to view the APP version.

- 11 -
System compatibility
Precautions about watch use
1.This watch supports nearly 200 mainstream mobile phone
models, including iphone and Android
Supported iphones: i Phone 4s/ 5 / 5C/ 5S/ 6 / 6PLUS/ 6S/ 6S
PLUS
Supported Android phones: Xiaomi: MI4, MI3, NOTE LTE,
HM NOTE 2, HM NOTE1S, 4C, HM 2A
HUAWEI: MT7, H60, P7
MEIZU: M1 NOTE, MX4, MX4 PRO, MX5, M2 NOTE
SAMSUNG: S4, S5, S6, NOTE2, NOTE3, NOTE4, NOTE5, A7
OPPO: R7
VIVO: X5 PRO, X5S LG: NEXUS 5, D885 ONEPLUS: A0001
2.Supported languages for the APP: English, simplified
Chinese, traditional Chinese
3.Supported languages for watch information: Japanese,
Danish, Korean, Portuguese, Estonian, German,Spanish,
Bulgarian, Russian, Czech, Greek, Swedish, Italian, Polish,
French, Finnish, Hungarian, and Romanian.
1.Theoretically, the watch supports phones or tablets with
operating systems of IOS7.0 and above, Android 4.3 and
above, and bluetooth 4.0, but not all mobile device models.
The models supported are subject to the actual situation.
2.There are precision device in this watch. Please do not drop
this watch or let it hit hard objects, which may cause abrasion
to the device surface or damage to the hardware.
3.Never dismantle or remake this watch, which may cause
problems or hinder the product's warranty.
4.This watch uses 5V500MA for charging. It is prohibited to use
the power supply exceeding the voltage load. Otherwise,
hardware damage may be caused.
5.Never throw this watch into fire. It may cause explosion.
6.This watch uses built-in battery which is non-detachable. Do
not try to replace the battery.
7.The watch works at 0-45℃, and its charging temperature is

- 12 -
Maintenance
also 0-45℃.
8.Take care of the following items when putting on your watch:
If you have sensitive skin or if you wear your watch too tightly,
you may felt uncomfortable.
9.Please swipe off the sweat on your body and wrist in time. If
the watch strap contacts soap,sweat ,allergens or
contamination often, it may cause allergy or pruritus to your
skin.
10.If your watch is wet, be sure to dry it first before charging it.
Otherwise,the watch may failure and the charging contact may
be corroded.
11. When working in an environment where the static electricity
is great, the bracket may fail, for example,gives no display or
abnormal display. Do not use your watch in high- pressure and
high magnetic environments where it may suffer from
electrostatic interference.
Be sure to use mild soap and water to clean the sensor and
connector. You are recommended to clean your watch every
week if you use it frequently.
·Protect the sensor from scratch.
·Be sure to swipe your watch with wet cloth and remove the
oil contamination or dust on it with mild soap.
·Never keep your watch exposed to powerful chemicals, such
as gasoline, clean solvent, propyl alcohol, alcohol, or insect
repellant. Such chemicals may damage the sealing, case, and
surface of your watch.
·After a swimming, please wash your watch with running water
and wipe it with soft cloth to keep it dry.
·Protect your watch from intense impact, extremely high
temperature, and exposure to the sun.
·The watch is waterproof only when its lens and case are intact.
Violent dismantling or mounting may damage its waterproof
feature.

- 13 -
FAQs
1. My watch cannot connect to bluetooth. What should I
do? (Fail or slow to connect/reconnect to bluetooth)
Answer: 1. Check whether your phone supports bluetooth
connection, that is, whether your phone is among the following
products: iPhone4s with IOS 7.0 operating system, Android
phones with Android 4.3 or above operating systems, phones
or tablets with bluetooth 4.0.
2. As signal interference exists for wireless bluetooth
connection, it may take you different time each time you try to
connect to bluetooth. If you fail to connect to bluetooth for a
long time, please check whether you are operating in an
environment where there is no magnetic field or additional
bluetooth device.
3. Disconnect and then connect bluetooth connection again
4. Close the background applications on your phone or restart
your phone
5. Do not connect your phone to other bluetooth devices or
functions at the same time.
6.Check whether the APP is running in the background. If not,
you may fail to connect to bluetooth.
2.The watch cannot be found on my phone. Why?
Answer: This is because a bluetooth broadcast is ongoing.
Please ensure that your watch has electricity, is in activated
state, and has not connected to another phone. Then, keep
your watch close to your phone. If the problem still persists,
please disconnect the bluetooth connection on your phone and
reconnect it in 20 seconds.
3.Should I keep the bluetooth connection connected
always? If I disconnect the bluetooth connection, will any
data is still there?
Answer: The data about exercise and sleeping before data
synchronization will still remain on the main unit of the watch.
After the watch has successfully connected to your phone via
bluetooth, the data on the watch will be automatically uploaded
to the phone. The watch, however, has a storage space for

- 14 -
only about one week's data. When its storage space is full, the
system will automatically cover the earliest data circularly.
Therefore, you need to synchronize the data to your watch in
time.
Note: If the functions of call notification and SMS notification
have been enabled, you must keep the bluetooth connection in
connected state. The function of alarm clock notification,
however, supports offline notification.
4.The distance and calories displayed on the APP are
different from that on the watch.Why?
Answer: Different people have different physical mechanisms
and thus consume different calories when doing exercise. You
are recommended to set your personal information and
synchronize it to your watch before viewing the exercise data
on the watch.
5.The watch cannot be charged.Why?
1)Please check whether the main unit is inserted in a correct
direction.
2)When the main unit has electricity lower than 3.6V, there will
be a period for battery precharging.
Note: Usually, the watch will get into the normal charging state
in 3-5 minutes after you plugging in the charger.
6.If I keep wearing the watch, will the bluetooth radiation
generated by the bracket damage my body?
Answer: The bluetooth radiation generated by the watch is far
below American FCC standard and can be neglected.
Therefore, long-time wearing the watch does not cause
radiation damage to human body.
7.If I have multiple sleeping mode on a day, does the watch
record the data of all of these sleeping mode together?
Answer: The watch will record the data of multiple sleeping
modes if you switch on the sleeping mode manually.
8.The watch vibrates abnormally. Why?
Answer: The abnormal vibration may be mis- triggered because
the function of phone anti-lost is on. As wireless bluetooth
signals receive various interferences, the watch may vibrate
when the bluetooth signal is weak or the bluetooth con nection
is disconnected . There fore , you are recommended to turn off

- 15 -
the function of phone anti-lost if you do not need it. If the
abnormal vibration lasts a long time, please try to solve it by
powering off your watch or phone.
9.Is the watch waterproof?
Answer: This watch adopts waterproof design and provides a
waterproof level of IP67. It features dustproof and waterproof,
and allows you to use it normally when washing your face and
hands. With a waterproof level of IP67, this watch allows you to
use it for 30 minutes 1m below water.

- 16 -
本製品をお買い上げいただき、誠にありがとうございます。本製品を使用する
前、まずは以下の指導を読んでください：
1.警告：新しい運動を始まる前、必ずあなたの医師と相談すること。スマート
リストバンドは即時の心拍数を測定できますが、医療的効能が付きません。あ
らゆる運動とダイエットを始まる前には医師と相談必要があります。
2.デバイス動作環境：このスマートリストバンドはAndroid 4.3、IOS7.0及び
Bluetooth 4.0以降の搭載機種に対応します。
3.充電：使用する前にスマートリストバンドを5V500mA USBデバイスで充
電します。
手首からスマートリストバンドの本体を外し、USB 充電ポート(5V500MA)に
差し込み、少なくとも２時間充電します。十分充電するため、金属端子を汚染、
酸化、インピュリティーのないように保存します。充電する時、スクリーンの上に
シンボルが点灯して、充電のプロセスを示します。長い間使用しない時は、三か
月毎に充電してください。
プロダクト １充電指示図
1、バンドを解いて、タッチキーの反対側を選んでください。
2、手で本体を握って、もう一つの手でバンドを握って、両手を使って外します。
3、USB端子を用いて充電します。携帯の充電器或いはラップトップのUSBでも
オッケーです。（充電時間：2-3H）
プロダクト 2 充電指示図
キーをタッチしま す

- 17 -
1.バンドを解いて、ストラップをひっくり返します。
2.タッチキー端子を押して、腕輪を外します。
3.USB端子を用いて充電します。携帯の充電器或いはラップトップ
のUSBでもオッケーです。（充電時間：2-3H）
携帯のアプリとの接続
1.電源をオンにする:スクリーンのボトムを３秒間長押しします。スマートリ
ストバンドの電源をオンする時、接続するためのペアリングコードが見えます。
電源をオフにする: タイムインターフェイスのボトムを３秒間長押して第二メニ
ューに入って、電源オフという選択肢を長押しして電源オフインターフェイスに
入ります。このインターフェイスでONをOFFに切り替えます。スクリーンが数字5
、4、3、2、1を表した後、リストバンドの電源が切ります。
リセットする: 第二メニューの中で、リセットのアイコンを長押ししてリセット
インターフェイスに入ります。このインターフェイスでOffをOnに切り替えて, シ
ステムをリセットします。時間及びデーターはすべて削除されます。
2.アプリをインストール する:携帯でQRコードをスキャンします。或いは「スマー
トリストバンド」をGooglePlay、Appstore或いはMy
appstoreで調べてダウンロードします。リストバンドを
携帯の近いところに置いて、携帯のアプリに入ります。
APPの接続指示に従って、リストバンドのBluetooth（名
前は「SmartWatch」）を見つけてペアリングします。そし
て、「続く」をクリックして接続を完了します。
3Appleデバイスと接続する:AppleのIOS
デバイスの場合には,初めてアプリと無事に
接続し終わってからBluetoothのペアリングリク
エストが示されます。電話着信、SMS、QQ及びWeChatのメッセージを伝送でき
るように、「Pair」をクリックします。そうしなければ、
着信の伝送はできません。
4.リストバンドを削除する:接続したリストバンド
を携帯から削除する場合は、アプリに入って設定>
私のリストバンドで削除します。ましリストバンドをアカウントに登録して関連

- 18 -
したら、アプリに入って設定>デバイスを管理しま
す で関連を解けます。
5.Appleデバイスでリストバンドを削除する:以上
のようにリストバンドを削除した後、アプリに入っ
て システム>Bluetoothを選びます。そして、デバ
イスの名の後の感嘆符を押して、ポップアップメニ
ューで「デバイスをネグレクト」を選びます。このよ
うに、ANCSの接続が削除できます。そしてAppleか
らの送信も受けません。
ノート:初めてアプリと接続する時は、必ずアプリの
関連許可を取ること。もし携帯の許可を禁止したら
、リストバンドと携帯の接続機能が発揮できないか
もしれません。
主インターフェイスの機能エリア
主 インターフェイス の 機 能エリア
1.時間モード:リストバンドと携帯と初めてペアした後、リストバンドは携帯の時
間と日付を一致するように調整します。
2.歩数計測モード:リストバンドの電源がオンした後は自動的に歩数計測モー