KREZ ACTIVE SW10 User manual

Version 2017-05-24
User’s Guide
(This picture can be changed by customer)
Model: KREZ ACTIVE

1.1 Features
0.91” OLED Display
BLE Bluetooth 4.0 Sync
Real time clock display
Built in pedometer, measure your steps, calculates distance and calories etc
Built in sleep monitor, monitor your sleep quality.
Incoming call reminder, display caller ID and phone number
Incoming SMS reminder
Alarm clock reminder
Fully compatible with iOS 7.1 or above and Android 4.4 or above
1.2 APP Installation
1.2.1: By search OBAND to download the APP from APP store or Google play store.
1.3 How to Charge Smart bracelet
Take the SB1001 module from band, and plug it into the slot of USB charge cable as the direction
showed on below picture:
After charging, plug out and assembly it into band, Please do not plug SB1001 module into slot as
other direction to avoid destroy the slot of USB charging cable.
If you use an AC adaptor (not included), charging current must be DC 5V 0.5A.
2.0 Power On
Tip: pls charging the smart band before use it.
2.1 Long press the touch key to switch on the wrist band, the shape of touch key as below:
2.2 Then the panel will turn on and shows “hello” and show watch interface

3.0 Connect to APP
Pls ensure the Bluetooth has turned on of your smart phone.
3.1 IOS system
Open OBAND APP, Go thought to setting page, click “Connect smart band (Scan Device)” to find your device
from the device list, Built Bluetooth connection (Device name is KREZ). System will show a pair request
frame as below:
3.1 Android system
Open OBAND APP, Go to setting page and click “Scan Device” to find Bluetooth device list, built Bluetooth
connection, Device name is KREZ.
Tips: to help user get better identify device the last two letters of device’s name will shows on smart band’s
screen. Such as the device name is Z2CB, the @CB will be show under the battery icon of screen.
3.2 Data Sync
Open OBAND APP, it will connect to smart band and SYNC data automatically.
3.3 Incoming call/Message Reminder
IOS: When iPhone receive incoming call or message, the smart band will show the calling phone number or
name on the screen, the smart band will be vibration.
Android: Pls turn on the protection (allow notification access) for APP in Setting of Android smart phone,
then it can get the notification of incoming call and messages.
3.4 Delete Bonding
KREZ ACTIVE will implement bonding after paired with smart phone, Other phone cannot connect to KREZ
ACTIVE before deleting bonding, there are 2 method to delete bonding:
Click remove device on APP the setting page;
Long press touch key for 5-8 seconds on calories burned mode.
Pls note after deleted bonding, the connection still be there, user need to select “ignore device” on IOS
Bluetooth setting.

4.0 Switch Display
Press touch key to switch SB1001 display, the mode is including Watch, Steps, Calories, and Distance:
4.0.1 Days of continuous achieved the goal
To encourage and keep a healthy life style, SB1001 can record the days we continuously achieved daily goal,
it will be displayed on the clock page as below:
Here shows the days user has continuously achieved the daily goal.
5.0 F & Q
Cannot find the smart band when pairing?
1. Pls make sure the smart phone
Bluetooth is ON and smart phone OS
Android 4.4 and above, and IOS 7.1 &
above
2. Pls make sure the distance between
phone and bracelet is no more than
0.5m, device is among the normal
Bluetooth communication distance
range (within 10m)
3. Pls make sure the bracelet is not under
low battery mode.
Cannot connect the device with APP
Pls reboot the Bluetooth or smart phone to
pair again.
How long is the charge time
2 hours
The battery drops so fast after turn on
notifications?
Because notification will turn on panel and
vibrate, this function was high power
consumption.
The panel is off when charging?
Yes, the panel was turn off when charging,

you can touch the touch key to turn on the
panel to see if it is under charging.
5.0.1 Use & Care
To care for your Smart band, please observe the following:
Pls don’t wear the smart band to swim or take shower.
Drying: Don’t try to dry your product using a microwave oven, conventional oven, or dryer.
Extreme heat or cold: Avoid temperatures below -10°C (14°F) or above 60°C (140°F).
For battery powered accessories, do not recharge your accessory in temperatures below 0°C (32°F)
or above 45°C (113°F).
Dust and dirt: Don’t expose your product to dust, dirt, sand, food, or similar materials.
Cleaning: To clean your product, use only a dry soft cloth. Don’t use alcohol or other cleaning
solutions
To help protect your product, always make sure that all connector and compartment covers are
closed and secure, and avoid carrying it with hard objects such as keys or coins.