
Specifications:
Input Video Signal: 0.5-1.0V
Input DC Signal: 5V
Input Connection: HDMI
Output Connection: VGA, Stereo
HDMI Video Input Format: 480p/576p/720p/1080i/1080p
VGA Video Output Format: 480p/576p/720p/1080i/1080p
Audio Output Format: 2 Channel LPCM
Frequency: 50/60Hz
Cable Length: 175mm
Dimensions: 55(L) x 41(W) x 17(H) mm
Connection and Operation:
Before Installation, please make sure all devices you want to connect have been turned off. Ensure that your
output devices support the same frequency and resolution settings as the source device.
1. Connect the HDMI input from source device to the converter.
2. Connect the VGA and Stereo audio output of this product to the display device.
3. Power on all connected devices; choose the input of the display device to its VGA channel.
4. The image does not need to be adjusted; the converter will position it automatically.
HDMI to VGA conversion may have some compatibility issues:
-If the VGA Monitor is set at a Refresh Rate (50Hz or 60Hz) that does not match the HDMI sources.
-If the VGA Monitor does not support 720p, 1080i or 1080p to match the HDMI sources output
resolution
-If the VGA Monitor does not support interlaced resolutions to match the HDMI sources output.
To prevent the above issues, you must match the source to the monitor when using this unit.
NOTES:
-Never open, repair, or modify any part of the converter or its accessories.
-Never get any part of the converter or its accessories wet.
-For cleaning, wipe with a soft slightly damp cloth.
Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere
NSW 2116 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.techbrands.com