1
www.digiop.com 5/4/16
DIGIOP® 2U Server Hardware Quick Start Guide
Congratulations on your new DIGIOP® Video and Data Management System
This guide provides setup instructions for your server hardware. Quick Start Guides and Manuals for the software can
be found at www.digiop.com/support. For more information, contact DIGIOP® Support at
800.968.3606 · support@digiop.com · www.digiop.com
1. Getting Started
Unpacking the Contents
Items included with your system:
Quick Start Guide
Surge Protection Notice
USB Flash Drive w/ backup image
Power cord
Mouse and Keyboard
Choose a Proper Location
Select a location that meets the following:
Adequate ventilation to avoid heat
Climate-controlled environment
Uninterrupted Power Supply (UPS)
Moisture-free environment
A place away from direct sunlight
An area with minimal dust
2. About Your System
SV-NVR Series
Front View
Hot Swappable Drive Bays USB 2.0 Configuration
Port
Information LED
Status LED
Solid Red System Overheating
Blinking Red (1 Hz) Fan Failure
Blinking Red (.25 Hz) Power Failure
Solid Blue Local UID has been activated
Blinking Blue Remote UID has been activated
Power
Failure
Network Activity
When Flashing
Power
On/Off
Power Reset
Hard Drive Activity
When Flashing
Indicates Power
on When Lit