Digisol RANGER SERIES User manual

1
RANGER SERIES
WIRELESS ACCESS
CONTROLLER, 5GE LAN, 2GE
WAN, 1GE DMZ, USB
DG-WU2005V
V1.0
2015-08-26

2
Copyright
Copyright 2015 by Smartlink Network Systems Ltd. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of this company.
This company makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability
or fitness for any particular purpose. Any software described in this manual is sold or
licensed "as is". Should the programs prove defective following their purchase, the buyer
(and not this company, its distributor, or its dealer) assumes the entire cost of all
necessary servicing, repair, and any incidental or consequential damages resulting from
any defect in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents thereof without
obligation to notify any personof such revision or changes.
Trademarks:
DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are
the property of the respective manufacturers.

3
The following items should be present in your package:
DG-WU2005V
Power Cord
Patch Cord (1 No.)
Rack Mount Kit
Installation Guide CD (includes User Manual & QIG)
Make sure that the package contains above items. If any of the listed items is damaged
or missing, please contact your retailer immediately.
Congratulations on your purchase of this outstanding product: DG-WU2005V Multi-
Service Gateway with WLAN Controller. The multi-service security gateway comes with
fruitful functions to meet SMB fast growing intranet access requirement. Multi-WAN
NAT function allows multiple clients to have high speed access. VPN technology can
enable secure access within intranet. ByAP controller function, it is easy to deploy Wi Fi
access infrastructure. Firewall and access control can prevent from hackers attack and
avoid unproductive activity. Friendly setting and professional network management
function, supervisor can easily take control of whole intranet. Besides being used for
SMB corporate, when combined with various other gateway series, it is also quite
suitable for commercial, mobile office, hot spot deployment and M2M-IoT application.
For optimal IT investment, DG-WU2005V will guarantee maximum ROI and highest
reliability.
Instructions for installing and configuring this product can be found in this manual.
Before you install and use this product, please read this manual carefully for fully
exploiting the functions of this product.

4
The following system requirements are recommended
Network Requirements
An Ethernet RJ45 cable or DSL
modem
10/100/1000 Ethernet adapter on PC /
NB.
Web-basedConfiguration Utility
Requirements
Computer with the following:
Windows®, Macintosh, or Linux-based
operating system.
An installed Ethernet adapter.
BrowserRequirements:
Internet Explorer 6.0 or higher
Chrome 2.0 or higher
Firefox 3.0 or higher
Safari 3.0 or higher.
CD InstallationWizard
Requirements
Computer with the following:
Windows® 7 / 8, Vista®, or XP with
Service Pack 2.
An installed Ethernet adapter.
CD-ROM drive.

5
Front View
The below mentioned table illustrates the working of the LED indicators:
LED
Description
Power
OFF: Device is powered down.
Green: Device is powered on.
Status
Green in flash: Device is in normal operation.
Green in fast flash: Device is in recovery mode or abnormal
state.
USB
(for 3G/4G)
OFF: USB 3G/4G connection is not established.
Green: USB 3G/4G connection is established.
Green in flash: data packet transferred via USB 3G/4G.
LAN-1 ~
LAN-5 / DMZ
Green: Ethernet connection is established.
Green in flash: data packet transferred via Ethernet.
OFF: No Ethernet cable attached or Device not linked.
WAN-1 /
WAN-2
Green: Ethernet connection is established.
Green in flash: Data packet transferred through WAN.
OFF: No Ethernet cable attached or Device not linked.
Auto MDI/MDIX RJ-45 Ports
2x GbE WAN to connect Internet,
1x GbE DMZ to connect local servers
5x GbE LAN to connect local devices
Reset
Button
USB

6
Rear View
Console Port
(DB9)
Receptor
for Power
Cable
Power
ON/OFF
Switch

7
Getting Started
Before you can use this product, you need to connect yourPC or NB to this gateway first.
You can connect your PC to one of LAN1~LAN5 ports through an Ethernet cable.
You can browse web UI to configure the device. Firstly you need to launch the Setup
Wizard browser first and then the Setup Wizard will guide you step-by-step to finish the
basic setup process.
Browse to Activate the Setup Wizard
Type in the IPAddress (http://192.168.123.254)
When you see the login page, type the password „admin‟ 1 and then click „login‟ button.
After login, select your language from the list.
1 It‟s strongly recommending that you change this login password from default value.

8
Wizard
Select “Wizard” for basic network settings and VPN settings in a simple way. Or, you can
go to Basic Network / Advanced Network / Applications / System to setup the
configuration by your own selection.
2.2.1.1 Configure with the Network Setup Wizard
Step 1
The network setup wizard will guide you to finish some basic settings, including
login password, time zone, WAN interface and LAN interface. One “Exit” button
at the upper-right corner of each window is provided for you to quit the setup
process.
Press “Next” to start the wizard.

9
Step 2: Change Password
Password setting. You can change the login password of web UI here. It‟s strongly
recommended that you change this login password from default value.
Press “Next” to continue.
Step 3: Time Zone
Time Zone setting. It will detect your time zone automatically. If the result of auto
detection is not correct, you can press “Detect Again” button or select manually.
Press “Next” to continue.

10
Step 4: WAN
WAN Interface setting. Choose the type of WAN connection. You can select
Ethernet WAN if you want to connect to Internet through fixed line. Or select USB
3G/4G if you want to connect to Internet through 3G/4G network. A variety of
WAN types are available for Ethernet WAN connection.
Press “Next” to continue.
Step 4-1: Ethernet (Static IPAddress)
If you choose Ethernet->Static IP Address, you need to input all IP address that
you get from ISP (Internet Service Provider) manually. This Static IP WAN Type
option is usually chosen when you get a fixed IP address from ISP.
Press “Next” to continue.

11
Step 4-2: Ethernet (Dynamic IPAddress)
If you choose Ethernet->Dynamic IP Address, you can input host name or
registered MAC address when your ISP requests it. In most cases, you can leave
them as blank and go to next. This Dynamic IP WAN Type option is usually
chosen when you get a dynamic IP address from ISP.
Press “Next” to continue.
Step 4-3: Ethernet (PPPoE)
If you choose Ethernet->PPP over Ethernet (so-called PPPoE), you need to input
account and password that you get from ISP. For other fields, you can leave them
as blank in most cases. This PPPoE WAN Type option is usually chosen when you
use ADSL for WAN connection.
Press “Next” to continue.

12
Step 4-4: Ethernet (PPTP)
If you choose Ethernet->PPTP, you need to input required dial-up information that
you get from ISP. This PPTP WAN Type option is usually chosen when your ISP
requests it.
Press “Next” to continue.
Step 4-5: Ethernet (L2TP)
If you choose Ethernet->L2TP, you need to input required dial-up information that
you get from ISP. This L2TP WAN Type option is usually chosen when your ISP
requests it.
Press “Next” to continue.

13
Step 5: LAN
LAN Interface setting. Change the LAN IP address and subnet mask of this
gateway. You can keep the default setting and go to next step.
Press “Next” to continue.
Step 6: Confirm and Apply
Check the new settings again. If all information is correct, please press “Apply”
button to save new settings. Then it will take 95 seconds to restart this gateway and
take new settings effective.

14
Step 7: Counting Down
Configuration is completed. Press “Finish” button to close Setup Wizard and
browser counts down for 65 seconds and provides you with “Click here” button to
reconnect to the device.
Configure with the VPN Setup Wizard
Step 1
The VPN setup wizard will guide you to finish profiles of IPSec, PPTP and L2TP
VPN connection quickly.
Press “Next” to start the wizard.

15
Step 2: VPN Type
Select type of VPN connection you want to create. Here you can choose IPSec,
PPTP, L2TP or GRE.
Press “Next” to continue.
Step 2-1: IPSec
If you choose IPSec, there are five options of tunnel scenario which can be chosen.
“Site to Site” is for two offices to create a VPN tunnel. “Site to Host” is for one
office to create a VPN tunnel to the control center. “Host to Site” is for the device
as the control center to create a VPN tunnel to a branch office. “Host to Host” is
for creating a peer to peer secure tunnel.
“Dynamic VPN” is for remote users to connect to the device securely. For other
options, please go to Advanced Network >> VPN to setup. Input the required
network information and pre-shared key for VPN connection.

16
For Dynamic VPN, you don‟t need to input network information of remote subnet
and remote gateway.
Press “Next” to continue.
Step 2-2: PPTP
If you choose PPTP, there are two options of mode can be chosen. Choose “Client”
if you want this device to connect to another PPTP server. Or choose “Server” if
you want other PPTP clients to connect to it.
Press “Next” to continue.
If you choose PPTP Client, please input tunnel name, IP/FQDN of PPTP server,
username/password, authentication and MPPE options. Please make sure these

17
settings are accepted by PPTP server. Otherwise, remote PPTP server will reject
the connection.
Press “Next” to continue.
If you choose PPTP Server, please select options of authentication and MPPE.
You also need to create a set of username and password for PPTP clients. In this
wizard, you can only create one user account. If you want to create more user
accounts, please go to Advanced Network >> VPN >> PPTP to add more users.
Press “Next” to continue.

18
Step 2-3: L2TP
If you choose L2TP, there are two options of mode can be chosen. Choose “Client”
if you want this device to connect to another L2TP server. Or choose “Server” if
you want other L2TP clients to connect to it.
Press “Next” to continue.
If you choose L2TP Client, please input tunnel name, IP/FQDN of L2TP server,
username/password, authentication and MPPE options. Please make sure these
settings are accepted by L2TP server. Otherwise, remote L2TP server will reject
the connection.
Press “Next” to continue.
If you choose L2TP Server, please select options of authentication and MPPE. You
also need to create a set of username and password for L2TP clients. In this
wizard, you can only create one user account. If you want to create more user
accounts, please go to Advanced Network >> VPN >> L2TP to add more users.

19
Press “Next” to continue.
Step 3: Confirm and Apply
Confirm new settings. If all new settings are correct, please press “Apply” button
to save these new settings and make them effective.

20
Following are the solutions to problems that may occur during the installation and
operation of the Digisol DG-WU2005V.
1Why can’t I configure the router even when the cable is plugged and the LED is
lit?
Do a Pingtest to make sure that the Wireless
Access Controller is responding.
Go to Start > Run.
1. Type cmd.
2. Press OK.
3. Type ipconfig to get the IP ofdefault gateway.
4. Type “ping 192.168.123.254”. Assure that you ping the correct IP Address assigned to this
wireless access controller. It will show four replies if youping correctly.
Ensure that your Ethernet Adapter is working, and that all network drivers are installed properly.
Network adapter names will vary depending on your specific adapter. The installation steps listed
below are applicable for all network adapters.
1. Go to Start > Right click on “My Computer” > Properties.
2. Select the Hardware Tab.
3. Click Device Manager.
4. Double-click on “Network Adapters”.
5. Right-click on Wireless Card bus Adapter or your specific network adapter.
6. Select Properties to ensure that alldrivers are installed properly.
Note: It is recommended that you use
an Ethernet connection to configure
it