Digital Equipment DGT-DP-1089SH25 User manual

DGT-DP-1089SH25
Color Camera
Plastic IR Dome Camera
Specification
Packin List
No Name Model Number
2. User Guide DGT-DP-
1089SH25
1
1.
Plastic R Dome Cameras DGT-DP-
1089SH25
1
Franchiser：
Notes :
::
: Before providin power for the
camera, please read this User Guide in
detail!
Do not attempt to disassemble the camera.
f the camera can not work, please contact
local franchiser or our company.
Model DGT-DP-1089SH25
Pick up Element 1/3"CMOS
Effective Picture
Elements (H×V) 728(H)×488(V)
Horizontal Resolution 600TV Line
Minimum Illumination
S/N Ratio More than 48dB
Scannin System 2:1 interface
Synchronous System nternal, Negative sync.
Auto Electronic Shutter PAL: 1/50s~1/100,000s
Gama Characteristic 0.45
IR Distance
25 Meters (with ￠ 5X30PCS nfrared LED)
IR Status
Under 10Lux by CDS
IR Power On
CDS AUTO Control
Video Output 1Vpp, 75Ω
Auto Gain Control Auto
Power /
//
/ Current DC12V (+/-10%)/400mA
Lens Board Lens 3.6mm / F2.0
Dimension (mm)
￠ 100x 70(H)
Wei ht ( ) 300
Stora e Temperature -30~+60
℃ RH95% MAX
Operatin Temperature -10~+45
℃ RH95% MAX
0.1Lux

INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits DGT-DP-1089SH25 product. We
adopt the latest CMOS technical of sensor and driver. The
most attractive characteristics are small and easy hidden,
suits the elevator and corridor. n addition, it owns the
characters of high
definition and stability, strong anti-
jamming, rich and real color. Fixing and using this model
are convenient too. t is very good for you to apply to your
CCTV system.
Please read this instruction manual carefully to
ensure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
*
* *
* Sensor (
((
( CCD )
))
)
Adopt CMOS 1/3 " CCD Sensor.
*
* *
*
Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
*
* *
* Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
*
* *
* Gama Characteristic
Camera Gama characteristic is 0.45.
*
* *
* Scannin Mode
PAL mode.
DC12V Power Supply
Monitor
DGT-DP-1089SH25
TROUBLE AND SOLUTION
Link wire rule ：
Power
Video
Note :
: :
:
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is -30~ + 60 ℃ .
(Recommendatory operating temperature is -10~+45 ℃ .)
● Never make the camera face the sun or bright object.
Otherwise, it will damage the CCD .
● Do not mount the camera near by the radiator or heater.
1. No Picture after providin power
. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude .
. Please check all the connecting cable and monitors whether be connected
correctly or not .
2. The picture level direction have flowin interference ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply .
. Check the monitor and peripheral equipments used.
3. The picture back round color chan es continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply’s voltage unstable .
. Connecting cables not connect correctly or have high impedance.
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing)
nstructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
Notes ：
：：
：
● The power supply must through safe attestation. ts output voltage,
current, voltage polarity and operating temperature must match the
camera’s requirement .
● When using the camera in the thunderbolt condition , please note to
mount Anti-thunder device or put off the power supply plug and cable .
● n order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
Video
DC12V
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
To prevent fire or shock hazarded. Do not expose the unit
to rain or moisture.