Digital Equipment DGT-DV-673SHT30 User manual

DGT-DV-673SHT30
Color Camera
Vandalproof IR Dome Color Camera
Specification
Packing ist
No
Name Model Number
2.
User Guide
DGT-DV-
673SHT30
1
1.
Vandalproof
IR Dome Color Camera
DGT-DV-
673SHT30 1
Franchiser：
Notes :
::
: Before providing power for the
camera, please read this User Guide in
detail!
Do not attempt to disassemble the camera.
If the camera can not ork, please contact
local franchiser or our company.
Model DGT-DV-673SHT30
Pick up Element 1/3" SONY EXview HAD CCD II
Effective Picture Elements
(H×V) PAL:1020 H)x596 V)
Horizontal Resolution 700 TV Line
0.001 Lux
0Lux ( ith IR LED ON)
S/N Ratio 52dB
Scanning System 2:1 interface
Synchronous System Internal, Negative sync.
Auto Electronic Shutter PAL: 1/50s~1/100,000s
Gama Characteristic 0.45
Video Output 1Vpp, 75Ω
Auto Gain Control Auto
Power /
//
/ Current DC12V(+/-10%) / 500mA
ens 2.8-12mm Manual Zoom Lens
Dimension (mm)
￠ 131 x 93(H)
Weight (g) 800
Storage Temperature -30~+60
℃ RH95% MAX
Operating Temperature -10~+45
℃ RH95% MAX
Minimum
Illumination
IR Distance
30 Meters ( ith ￠ 5X36 PCS Infrared LED)

INTRODUCTION
Congratulations on your purchase of this product.
This User Guide suits DGT-DV-673SHT30 series product.
We adopt the latest SONY technical of sensor and driver.
The most attractive characteristics are small and easy
hidden, suits the elevator and corridor. In addition, it o ns
the characters of high
definition and stability, strong anti-
jamming, rich and real color. Fixing and using this model
are convenient too. It is very good for you to apply to your
CCTV system.
Please read this instruction manual carefully to
ensure proper use of the product.
CONNECTING
BRIEF OF PRODUCT
*
* *
* Sensor (
((
( CCD )
))
)
Adopt SONY 1/3 " CCD Sensor.
*
* *
* Auto Gain Control (AGC)
Built-in auto gain control (AGC)
circuit. The color camera
can get high definition picture in lo Lux condition.
*
* *
* Scanning Mode
PAL mode.
*
* *
* OSD SETTING
DC12V Power Supply
Monitor
DGT-DV-673SHT30
TROUB E AND SO UTION
Link ire rule ：
Power
Video
Note :
: :
:
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high or
too lo temperatures. The operating temperature is -30~ + 60 ℃ .
(Recommendatory operating temperature is -10~+45 ℃ .)
● Never make the camera face the sun or bright object.
Other ise, it ill damage the CCD .
● Do not mount the camera near by the radiator or heater.
1. No Picture after providing power
. May be the po er supply voltage abnormity, please check the po er
supply voltage and pole hether exactitude .
. Please check all the connecting cable and monitors hether be connected
correctly or not .
2. The picture level direction have flowing interference ripples
. May be caused by the po er supply AC ripples, it need filter the ave of the
po er supply .
. Check the monitor and peripheral equipments used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance bet een the
camera and the fluorescent lamps can improve it.
. Use po er supply external sync. camera can solve it.
4. The picture smear too mass
. The po er supply’s voltage unstable .
. Connecting cables not connect correctly or have high impedance.
To prevent fire or shock hazarded. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to rain or moisture.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ ithin the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
Video
DC12V
CAUTION:
CAUTION: TO REDUCE THE RISK OF E ECTRIC
SHOCK
DO NOT REMOVE COVER OR BACK NO USER
SERVICEAB E PARTS INSIDE. REFER SERVICING
RISK OF E ECTRIC. DO NOT OPEN
CAUTION: TO PREVENT E ECTRIC SHOCKS AND RISK OF
FIRE HAZARDS, DO NOT USE OTHER THAN
SPECIFIED POWER SOURCE.
Notes ：
：：
：
● The po er supply must through safe attestation. Its output voltage,
current, voltage polarity and operating temperature must match the
camera’s requirement .
● When using the camera in the thunderbolt condition , please note to
mount Anti-thunder device or put off the po er supply plug and cable .
● In order to capture high quality pictures, the po er supply’s cable and
video output cable should not be too long.
MENU
UP
DOWN
RIGHT
LEFT
PRESS
KEY BOARD
OSD SET
LENS
MANUAL
AUTO
TYPE:DC/VIDEO
MODE:CLOSE/AUTO/OPEN SPEED:0-255
SHUTTER/
AGC
AUTO
HIGH LUMINANCE MODE:SHUT+AUTO IRIS/AUTO
IRIS
BRIGHTNESS:0-255
LOW LUMINANCE MODE:OFF/AGC
BRIGHTNESS: ×0.25, ×0.5, ×0.75, ×1
MANUAL
MODE:SHUT+AGC
SHUTTER:1/50,1/120,1/250,1/500,1/1000,1/2000,
1/4000,1/10000
AGC:6,12,18,24,30,36,42,44.8
WHITE BAL
ATW SPEED/DELAY CNT/ATW FRAME/ENVIRONMENT
PUSH/ANTI CR/PUSH LOCK/USER1/USER2/MANUL
BACK LIGHT OFF/BLC/HLC
PICT
ADJUST MORROR/BRIGHTNESS/CONTRAST/SHARPNESS/HUE/GAIN
ATR
OFF
ON LUMINANCE/CONTRAST
MOTION
DET
OFF
ON DETECT SENCE/BLOCK DISP/MONITOR AREA/
AREA SEL/TOP/BOTTOM/LEFT/RIGHT
PRIVACY
OFF
ON AREA SEL/TOP/BOTTOM/ LEFT/RIGHT/
COLOR/TRANSP/MOSAIC
DAY/NIGHT
COLOR
B/W BURST:OFF/ON
AUTO
BURST:OFF/ON
DELAY CNT/DAY-NIGHT/NIGHT-DAY
NR NR MODE:Y/C,OFF,Y,C
CAMERA ID OFF/ON
SYNC INT
LANGUAGE
CAMERA RESET/BACK/EXIT/SAVE ALL
ENGLISH/CHINESS/JAPANESS/ESPANOL/PORTUGUES/
PYCCKNN/FRANCAIS/DEUISCH