Digital Watchdog Compressor DW-CP04 User manual

DW-CP04 Compressor-
Analog to IP Signal Converter
User’s Manual
Version 1.1
Class A Digital Device (industrial & commercial environment)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to CE
and FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

DW-CP04 Manual
01Manual_CP04_05172013 2
DW-CP04 User’s Manual
Digital Watchdog®
Manual Edition 05172013–May 2013
©2000-2013 DIGITAL WATCHDOG, INC.
All Rights Reserved.
DIGITAL WATCHDOG, INC.
Tampa, FL ● USA
Technical Support
For technical support call, email, or visit our web site.
USA & Canada 1+ [phone]
International 1+ [phone]
French Canadian 1+ [phone]
Email: [email protected]
Web site: www.digital-watchdog.com or dwcc.tv

DW-CP04 Manual
01Manual_CP04_05172013 3
Contents
1. PRODUCT OVERVIEW .......................................................................................................................... 8
1.1. DW-CP04........................................................................................................................................................................ 8
1.2. KEY FEATURES................................................................................................................................................................... 9
1.3. TECHNICAL SPECIFICATION...........................................................................................................................................10
1.4. DW-CP04 PACKING LIST............................................................................................................................................12
2. PRODUCT DESCRIPTION ................................................................................................................... 13
2.1. DW-CP04 FRONT VIEW..............................................................................................................................................13
2.2. DW-CP04 REAR VIEW ................................................................................................................................................14
2.2.1. CTL Port Description..........................................................................................................................................15
2.2.2. RS-232 Interface ..................................................................................................................................................15
2.2.3. RS-485 Connection.............................................................................................................................................15
2.2.4. DI Connection.......................................................................................................................................................15
2.2.5. DO Connection.....................................................................................................................................................15
3. DW-CP04 INSTALLATION AND BASIC SETUP............................................................................... 16
3.1. BEFORE INSTALLATION ..................................................................................................................................................16
3.2. FACTORY DEFAULT SETTINGS.......................................................................................................................................16
3.3. INSTALLING THE DW-CP04 ........................................................................................................................................16
4. IP INSTALLER.......................................................................................................................................17
4.1. ABOUT THE IP INSTALLER.............................................................................................................................................17
4.2. INSTALLING AND UNINSTALLING THE IP INSTALLER ................................................................................................17
4.2.1. Installing IP Installer...........................................................................................................................................17
4.2.2. Uninstalling IP Installer.....................................................................................................................................18
4.3. USING THE IP INSTALLER..............................................................................................................................................18
4.3.1. Staring the IP Installer ......................................................................................................................................18

DW-CP04 Manual
01Manual_CP04_05172013 4
4.3.2. IP Installer ’ s Main Window .............................................................................................................................18
4.3.3. IP Installer ’ s Main Window .............................................................................................................................19
4.3.4. Manual Network Setup ....................................................................................................................................19
4.3.5. Automatic Network Setup ..............................................................................................................................20
5. COMPRESSOR’S WEB VIEWER ......................................................................................................... 21
5.1. ENTERING LIVE VIEW.....................................................................................................................................................21
5.1.1. Single-Mode View...............................................................................................................................................22
5.1.2. Multi-Mode View ................................................................................................................................................22
5.1.3. Image Snapshot ...................................................................................................................................................22
5.1.4. Image Clip ..............................................................................................................................................................22
5.1.5. Instant Recording................................................................................................................................................23
5.1.6. Instant Playback...................................................................................................................................................23
5.1.7. Extended Features ..............................................................................................................................................23
5.1.8. Video Control........................................................................................................................................................24
5.1.9. Audio Control .......................................................................................................................................................24
5.1.10. PTZ Control .........................................................................................................................................................24
5.2. ENTERING THE SMART PLAYER ....................................................................................................................................25
5.2.1. Smart Player ’ s Main Screen............................................................................................................................25
5.2.2. Searching Video...................................................................................................................................................25
5.2.3. Extra Features.......................................................................................................................................................26
5.3. ENTERING ADMIN MENU .............................................................................................................................................27
5.4. ADMIN MENU STRUCTURE...........................................................................................................................................28
6. QUICK CONFIGURATION .................................................................................................................. 29
6.1. STEP-1 SERVER NAME SETUP......................................................................................................................................29
6.2. STEP-2 LOCAL DATE &TIME CONFIGURATION.......................................................................................................29
6.3. STEP-3 NETWORK CONFIGURATION ..........................................................................................................................29

DW-CP04 Manual
01Manual_CP04_05172013 5
6.4. STEP-4 IP-CCTV DNS™SETUP ...............................................................................................................................30
6.1. STEP-5 RECORDING CONFIGURATION .......................................................................................................................30
6.2. FINISH ..............................................................................................................................................................................30
7. SYSTEM CONFIGURATION................................................................................................................ 30
7.1. SERVER NAME SETUP....................................................................................................................................................30
7.2. DATE &TIME .................................................................................................................................................................31
7.3. ADMINISTRATOR PASSWORD.......................................................................................................................................31
7.4. ACCESS CONTROL..........................................................................................................................................................32
7.5. USER REGISTRATION......................................................................................................................................................32
7.5.1. Add ............................................................................................................................................................................32
7.5.2. Edit .............................................................................................................................................................................33
7.5.3. Delete........................................................................................................................................................................34
8. NETWORK CONFIGURATION ........................................................................................................... 34
8.1. NETWORK CONFIGURATION.........................................................................................................................................35
8.1.1. Static IP Configuration......................................................................................................................................35
8.1.2. DHCP Client Configuration.............................................................................................................................35
8.1.3. PPPoE Configuration..........................................................................................................................................36
8.2. NETWORK PORTS...........................................................................................................................................................36
8.3. BANDWIDTH CONTROL.................................................................................................................................................36
8.4. VIEW NETWORK STATUS ..............................................................................................................................................37
8.5. NETWORK STATUS NOTIFICATION ..............................................................................................................................38
8.6. IP-CCTV DNS™SETUP .............................................................................................................................................39
8.7. PORT FORWARDING &UPNP.....................................................................................................................................40
8.8. RTP/RTSP......................................................................................................................................................................41
8.9. SNMP SETUP.................................................................................................................................................................42
8. DEVICE CONFIGURATION ................................................................................................................. 43

DW-CP04 Manual
01Manual_CP04_05172013 6
8.1. SERIAL PORTS CONFIGURATION..................................................................................................................................43
8.1.1. Serial Input Mode ...............................................................................................................................................43
8.1.2. Serial Output Mode ...........................................................................................................................................45
8.1.3. Transparent Mode ..............................................................................................................................................45
8.1.4. PTZ Mode ...............................................................................................................................................................46
8.2. PRIVACY ZONE ...............................................................................................................................................................48
8.3. CAMERA &MOTION.....................................................................................................................................................49
8.3.1. Camera Configuration.......................................................................................................................................50
8.4. DI/DO.............................................................................................................................................................................51
8.4.1. DI/DO........................................................................................................................................................................51
8.5. DI STATUS/DO CONTROL ...........................................................................................................................................51
9. ADVANCED CONFIGURATION ......................................................................................................... 52
9.1. ADVANCED SERVICES ....................................................................................................................................................52
9.1.1. E-mail Service Configuration .........................................................................................................................52
9.1.2. FTP(Buffered)Service Configuration ............................................................................................................54
9.1.3. FTP (Periodic) Service Configuration..........................................................................................................56
FTP (Periodic) Service Configuration for each Camera .....................................................................................56
9.1.4. Sensor Notification.............................................................................................................................................57
9.1.5. Alarm Output Service Configuration..........................................................................................................58
10. RECORDING CONFIGURATION .................................................................................................... 59
10.1. SD CONFIGURATION.....................................................................................................................................................59
10.1.1. SD Status & Format ........................................................................................................................................59
10.1.2. SD Information...................................................................................................................................................60
10.2. RECORDING CONFIGURATION .....................................................................................................................................61
10.3. VIEW RECORDING PROFILE...........................................................................................................................................65
10.4. RECORDING MODE........................................................................................................................................................65

DW-CP04 Manual
01Manual_CP04_05172013 7
10.5. SD STATUS REPORT ......................................................................................................................................................66
10.6. CLEAR RECORDING CONFIGURATION.........................................................................................................................67
10.7. DELETE RECORDED DATA .............................................................................................................................................67
11. UTILITIES........................................................................................................................................... 68
11.1. SYSTEM LOG ...................................................................................................................................................................68
11.2. SAVE CONFIGURATION..................................................................................................................................................68
11.3. REBOOT............................................................................................................................................................................69
11.4. FACTORY DEFAULT.........................................................................................................................................................69
11.5. SYSTEM UPDATE.............................................................................................................................................................70
11.5.1. Update by Item .................................................................................................................................................70
12. APPENDIX ........................................................................................................................................ 71
12.1. TROUBLESHOOTING THE COMPRESSOR SMART LIVE VIEWER................................................................................71
12.1.1. Installation............................................................................................................................................................71
12.1.2. Server .....................................................................................................................................................................71
12.1.3. Video ......................................................................................................................................................................71
12.1.4. Audio ......................................................................................................................................................................72
12.1.5. PTZ...........................................................................................................................................................................72
12.1.6. Relay Output.......................................................................................................................................................72
12.1.7. Other.......................................................................................................................................................................73

DW-CP04 Manual
01Manual_CP04_05172013 8
1. Product Overview
1.1. DW-CP04
Digital Watchdog’s DW-CP04 is a 4ch network video server which transmits digital images captured by
Analog CCD camera over IP (Internet Protocol) network.
It can transmit up to 120fps@D1 over the existing network. You can monitor video of DW-CP04 through web
browser (for example MS Internet Explorer), if DW-CP04 is connected to network. DW-CP04 supports video
compression both MJPEG and H.264 simultaneously so that user can choose appropriate video compression
for the purpose. For both MJPEG and H.264, DW-CP04 provides 6 levels of video quality.
DW-CP04 server is state-of-the art device and leads new generation of monitoring and security solution.
Picture 1 : DW-CP04

DW-CP04 Manual
01Manual_CP04_05172013 9
1.2. Key Features
OnVIF Compliant
4CH BNC In
120fps @ D1 Resolution
Dual Codec (H.264/ MJPEG) with Single Stream
Motion Detection
Two- Way Audio
Micro SD Card Interface
RS-232/ RS-485 PTZ Control
Free and Simple DDNS Service
Search and Playback from the software interface
Frame-rate& Bandwidth Control
4 Alarm Inputs, 4 Alarm Outputs
Event Notifications via E-mail with Image
Configuration and control device through Web browser

DW-CP04 Manual
01Manual_CP04_05172013 10
1.3. Technical Specification
Hardware
32bit RISC CPU/ Embedded Linux
128Mbytes SDRAM/ 128MByte Flash
Video
compression
H.264/ MJPEG(single stream)
Resolution
NTSC: 704x480, 352x240,160x112
PAL: 704x576, 352x240,160x112
Frame rate
(each channel)
Up to max 120/100 fps@D1
Video Streaming
MJPEG and H.264 Single Streaming (Simultaneously)
Controllable frame rate and bandwidth
Image setting
Compression levels: 6 (MJPEG/H.264)
Color: color, black & white
Transmission
Up to 120fps(NTSC)/100fps (PAL)
when 4channels at D1
Voice
8bit G.711, 8Khz, 8Kbyte/sec
Audio 1ch in & 1ch out
LAN interface
10/100 Base T Ethernet auto sensing
Alarm I/O Interface
4x1 Photo-coupled inputs and 4 Relay output
Video Input
4 Channel Composite Video Input
Serial Interface
COM Port: RS-232
AUX Port: RS-485
COM ports for console, serial input/output device and AUX ports for PTZ or
other RS485 device
Max Baudrate: 115200 bit/s
Security features
Multi user level protection for camera access, PTZ, Alarm I/O
Advanced Service
Up to 5.6M memory for Pre/Post alarm buffer e-mail, FTP, IP notification,
Alarm Notification to e-mail, CGI Call by event or schedule
Built-in Motion detections
Accuracy: 12x12=144 blocks
Motion Sensitivity : -100 ~ 100 : 100 is hypersensitive
PTZ & UART Control
Support
PTZ and UART device control through serial port (RS-232/RS-485) (Support
protocols from Pelco “P”& “D” protocol, Vicon V1311RB, Samsung PTZ,
Honeywell PTZ and X10 Epson Printer)
Others
Time stamp on Video
Transmit External data(ex. POS) transfer with Video
IP notification by e-mail
Management
Configurable by serial, web or telnet
Remote system update via telnet, FTP OR web browser.
Developer support
Provides HTTP CGI API
ActiveX control development kit
PWR Supply
SMPS
Input: 100~240VAC, 50/60 Hz, 300mA
Output: DC 12Volt, 1A, SMPS

DW-CP04 Manual
01Manual_CP04_05172013 11
PWR Consumption
DC 12Volt
Max or Peak: 0.6 A
Operating Environment
Temperature : -10° ~ 50°C
Humidity : 10 ~ 90% RH(non-condensing)
Miscellaneous
Work with Smart NVR(CMS software)
Dynamic IP support through IPCCTVDNS Server
Users
128 simultaneous users
Installation & management
Configuration: installation wizard, HTTP, telnet and console Upgrade
Firmware: HTTP, telnet & FTP
Video access from Web
browser
Video access from Web browser
Minimum Web browsing
requirements
Pentium 4, 2 GHz, 2GB(RAM) or higher
Video Card: 256MB RAM, 1024x768 resolution or higher
100Mbps Network Adaptor or faster
Windows XP Pro or later
Internet Explorer 6.x or later
Supported protocols
HTTP, RTP/RTSP, TCP/IP, FTP, Telnet, RARP, PPPoE, SNMP, PAP, CHAP,
DHCP, NTP, SMTP client, uPNP, and etc.
Approvals
KC
FCC : Class A
CE : Class A
RoHS
Dimensions (HxWxD) and
weight
148(W) x 118(D) x 25(H) (in mm)
About 0.25kg without power supply.
Table 1 : DW-CP04 Data Sheet

DW-CP04 Manual
01Manual_CP04_05172013 12
1.4. DW-CP04 Packing List
DW-CP04
1 EA
Power Supply
(Power Cable & SMPS DC12V 1A Adapter)
1 EA
CD (User’s Manual, IP Installer and etc.)
1 EA
Table 2 : DW-CP04 Packing List
Note: Please make sure all the listed items are included in the package. For any
missing items, please contact your local distributor.

DW-CP04 Manual
01Manual_CP04_05172013 13
2. Product Description
2.1. DW-CP04 Front View
Picture 2 : DW-CP04 Front View
Picture 3 : Enlarged Front LED
Name
Description
A
LAN LINK LED
Indicates the connection status of LAN connector. It goes green when a
physical connection is properly made to the LAN port.
B
POWER LED
This red LED is lit during DW-CP04 is powered on.
C
DI
Sensor/Contact Input Port
D
DO
Beacon/Alarm Output Port
E
SD CARD
Micro SDHC Slot for Onboard Storage
F
CONTROL
CTL Port (RS-485, RS-232, DI, DO)
Table 3 : DW-CP04 Front Panel
E
A
B
C
D
E
F

DW-CP04 Manual
01Manual_CP04_05172013 14
2.2. DW-CP04 Rear View
Picture 4 : DW-CP04 Rear View
Name
Description
A
Video In 1
BNC cable port for Video input of number 1 camera of Module 1.
B
Video In 2
BNC connector for Camera 2
C
FD
Beep one time (0.5 sec) after three seconds and then beep three times shortly
After another three seconds.
D
Video In 3
BNC connector for Camera 3
E
Video In 4
BNC connector for Camera 4
F
MIC
Audio Input Port
G
SPK
Audio Output Port
H
LAN
RJ-45 Network Connector
I
Power
DC 12V 1A
Table 4 : DW-CP04 Rear Panel
A
B
C
D
E
F
G
H
I

DW-CP04 Manual
01Manual_CP04_05172013 15
2.2.1. CTL Port Description
The picture below shows how to wire CTL port connector pins for Sensor Input (DI, GND), Relay Out
(DO+, DO-), RS-485 (+, -) and RS-232 (RXD, TXD, GND) signals.
Picture 5 : CTL Port Description
2.2.2. RS-232 Interface
RS-232 Port is provided for a connection with external devices such as water level sensor, speed
sensor, etc. The GND pin for RS-232 is shared with the Sensor Input GND. If the DW-CP04 needs to
be connected to other network devices via RS-232, then RXD and TXD pin may need to be cross-wired.
2.2.3. RS-485 Connection
RS-485 port is a serial interface for communication with external devices such as controlling PTZ,
multiplexers, access control boxes, X10 protocol peripherals, etc. Refer to the individual manuals for
each external device you wish to connect to the DW-CP04 for additional information on protocols and
proper configuration.
2.2.4. DI Connection
DI (Digital In) is a Sensor Input port which can be used for acquiring input signal from an external
device such as sensors, switches, etc. DW-CP04 can recognize the input state if DI+ port is connected
to GND or left unconnected. See 8. Device Configuration for additional information.
2.2.5. DO Connection
DO (Digital Out) is an Alarm Output port which can be used for activating door opener/closers, sirens,
emergency beacons, etc. DO ports are on Open-Collector basis, and driving current must not exceed
100mA at DC 5 to 12Vrange. DW-CP04 activates DO port by turning on or off the Open-Collector
driver. See section- 8. Device Configuration for additional information.

DW-CP04 Manual
01Manual_CP04_05172013 16
3. DW-CP04 Installation and Basic Setup
3.1. Before Installation
Read carefully User's Manual.
Check user’s Network (IP Address, Network Mask and default gateway)
Secure an IP address for DW-CP04.
3.2. Factory Default Settings
The following table shows the factory default condition for the Compressor. Please refer to this when
you need to change the values on the admin menu.
Factory Default
Admin ID
root
Admin password
root
IP address
10.20.30.40
Network mask
255.255.255.0
Gateway
10.20.30.1
Table 5: Factory Default
Note: Factory default Admin ID and Password are all lower case letters.
3.3. Installing the DW-CP04
For installation of DW-CP04, please follow the steps below.
1. Place the analog cameras in place and connect power supplies. Consult the cameras’ manual
for additional information.
2. Connect the video output ports of the analog cameras to the video-in ports of the DW-CP04.
3. Connect the DW-CP04 to the desired network by connecting a network cable to the encoder’s
LAN port.
4. Connect the power supply of DW-CP04. To prevent any damage to the device, it is
recommended to plug the power cables to the power supply and only then to the Compressor.
5. Once both LEDs are on you can connect to the DW-CP04’s web viewer. (Power LED should
appear orange, and LAN LED should appear green).
6. To find the Compressor on the network as well as configure its network settings, run the IP
Installer tool available on the complimentary CD accessory.

DW-CP04 Manual
01Manual_CP04_05172013 17
4. IP Installer
4.1. About the IP Installer
The IP Installer software can be found in the accessory CD available with the Compressor. The IP
Installer is utility program designed to locate all DW-CP04 Compressors on your network. By using
the IP Installer, users will be able to:
Setup the Network Configuration of the Compressor.
Runs on Microsoft Windows operating system (XP, Vista, 7)
Searching for Network Cameras, Video Servers, and Network Video Recorders
Remotely upgrade the Compressor’s Firmware
Support automatic and manual IP setup
4.2. Installing and Uninstalling the IP Installer
4.2.1. Installing IP Installer
Insert the CD to the ODD tray and check the installation file.
You may see a consent prompt for running this install program, which is an User Account Control of the
Windows as shown below-
Click 'Yes' button, then the installation wizard window will appear. Click ‘Next’.
If necessary, click the Browse button to choose a proper path for the installation.
Click ‘Install’. You will see the progress of the installation as shown below.
Click 'Finish' when the installation process is complete.

DW-CP04 Manual
01Manual_CP04_05172013 18
4.2.2. Uninstalling IP Installer
If you want to remove the IP Installer program from your PC, click Start > All Programs > IP Installer >
Uninstall. You may see a consent prompt for running this install program. Click ‘Yes’ to continue.
Follow the installation wizard to complete the uninstall process and remove the IP Installer software
from the PC.
4.3. Using the IP Installer
4.3.1. Staring the IP Installer
Start the ‘IP Installer’ by double clicking the newly created Desktop shortcut icon.
Or you can also start the program by clicking Start > All Programs > IP Installer > IP Installer.
4.3.2. IP Installer’s Main Window
Search Product
Scan the network and show all the DW-CP04 products that are on the
network.
Clear Product List
Clear the DW-CP04 products list created by searching the network.
Automatic IP Setup
Configure the network setting of selected IP device in Automatic mode.
Manual IP Setup
Configure the network setting of selected IP device in Manual mode.
Connect Product
Homepage
Connect to the server homepage of the selected IP device.
Update Firmware
Update the firmware of the selected IP device.

DW-CP04 Manual
01Manual_CP04_05172013 19
Filter Configuration
Define the range of MAC and IP addresses to search.
4.3.3. IP Installer’s Main Window
Make sure that your DW-CP04 is connected to the network, and click the Search Product button.
A status window will pop up to show the progress of the searching. When the IP Installer completes
scanning the network, all supported devices will appear in the results list.
4.3.4. Manual Network Setup
Configuring the network settings of the Compressor can be done by performing any of the following
commands:
1. Right-click on the selected device and select Setup Product IP
2. Click the Manual IP Setup button on the main Toolbar
3. You can select multiple devices from the results list by holding the Ctrl button and clicking on
multiple devices in the list.
Setting up Network Configuration for a single product:
*

DW-CP04 Manual
01Manual_CP04_05172013 20
Note: Wireless option currently not available in DW-CP04 models
Setting up Network Configuration for multiple products:
Once multiple servers have been selected, press the manual IP Setup button.
All selected servers will appear in a list. You can modify the value of each changeable field by clicking it.
If you click Apply to all, the settings set to the first server will apply to all remaining devices. All will
have the same value for that parameter. In this case, each device’s Server name and IP Address field
will have +1 incremented value added to the original value.
For Password field, the entered information will be the same.
In using Apply to all, you can choose which field is affected. Put check marks only on the fields you
want to use this automatic action as below.
4.3.5. Automatic Network Setup
Before the system can automatically setup the server’s network settings,
select the IP type you would like for the device. Choose from the available
options: Static, DHCP, or PPPoE.
In this setup mode, the IP Installer program will check your local network
and assigns available IP addresses to the IP devices.
If the software detects that the network has more than one IP address
classes, a confirmation window will be displayed. Chose the proper IP
address you wish to assign your device as press ‘OK’.
Figure 1Double Network IP Warning