Digital2 Premier DP-5200F User manual

U.S Service Hotline : [phone]
More support at www.d2pad.info
USER MANUAL
DP-5200F

Model: DP-5200F
Micro USB Port
1
Lightning Cable
for iPhone & iPad
2
Baery Indicators
3
Power Buon
4
Micro USB for
Smartphone & Tablet
5VDC, 0.5A max
5
• 5200 mAh Portable Baery
• Micro USB to USB Cable
• User Manual
Overview
Package Contents
3
4
5
2
1

Model: DP-5200F
iphone/ipad
smartphone/tablet
1. Fully Recharge the Portable Baery by connecng it to a computer or an
USB wall charger with the included Micro USB to USB Cable.
2. Press the power buon for 2 seconds to turn the portable baery on.
3. Connect your mobile devices to the corresponding charger and verify
charging takes place.
Charging Mobile Devices

Model: DP-5200F
• Press the power buon and the LED lights will indicate the baery level as shown below.
Battery Indicator
Recharging - Input
Portable Battery Operation
When the portable baery is off, press and hold the power buon for 2 seconds to turn it on.
The portable baery will turn off automacally when no devices are connected to the portable
baery or the portable baery has been fully charged.
To show the remaining power level in the portable baery, simple press the power buon once.
When the portable baery’s power level reaches 1% or less, the LED light will flash for 30
seconds and the portable baery will turn off.
The current an USB power source can provide determines the speed the portable baery will
be charged at. Below is an approximate charging me from 0% to 100% in different currents.

Model: DP-5200F
Safety
Portable Battery Operation (cont.)
The portable baery has short-circuit protecon, over-current protecon,
over-charge/discharge protecon, current limit, etc.
When the internal baery in the portable baery is protected/deacvated, there will be no
current output to charge your devices. In this case, disconnect all devices from the portable
baery, then plug the portable baery to a USB power source with the included Micro USB to
USB cable. The portable baery will be able to acvate and funcon properly again.
In certain rare situaon, controller inside the portable baery freezes up due to abnormal
operaon, the portable baery cannot turn on, charge a device, or be recharged, the LED
baery indicators will not light up. In this case, unplug all devices from the portable baery
first. Next, press and hold down the power buon while connecng the portable baery to an
USB power source. The portable baery will reset and resumes funconality.
Charging Device - Output
The baery has 2 outputs, Lightning connector at 2.1A max, and Micro USB connector at 0.5A.
Total combined output by the portable baery is 2.6A max.
The portable baery can charge two devices simultaneously.
FCC WARNING
This device complies with part 15 of the FCC rules.
Operaon is subject to the following two condions :
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operaon.

Warranty
Digital2 offers a ONE YEAR limited warranty for all Digital2 Portable Battery units,
limited to those residing in the 48 continental United States and Canada.
Digital2 warrants the products to be free from defects in materials and workmanship as
sold to the original purchaser. This warranty is for replacement for like-items only and do
not cover items out of production if the company no longer stocks them. This warranty
is not assignable. Third-party products, such as mobile/ handheld devices, media
players, camcorders, cameras, tablets, etc. interacting with the Digital2 products are not
covered by this warranty.
Digital2’s sole obligation under this warranty is to replace or, at its option, to repair, free
of charge, all the product’s defective parts. This warranty applies only on the condition
that the product has been installed, maintained, and operated under conditions of
normal use and in accordance with the installation guide provided. The provisions of this
warranty shall not apply if, in Digital2’s sole judgment, the product has been subject to
misuse or neglect, improper installation, accidental damage, or repaired or altered in
ways that affect its performance or reliability.