DigitaLinx IPEX2100 Series User manual

11675 Ridgeline Dr.
Colorado Springs, CO 80921
Rev 191105 Toll-Free: 800-530-8998
Fax: [phone]
[e-mail]
IPEX2100 Series Quick
Install Guide
This guide is for quick installaon only.
For complete Digitalinx IP Deployment Guide go to www.libav.com or use a
QR reader to access the manual via QR code below.
Scan QR Code with your Smart-phone or Tablet

IPEX2100 Series Quick Install Guide
3
1. Read these instrucons – All the safety and operang instrucons should be read before this product is operated.
2. Keep these instrucons – The safety and operang instrucons should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operang instrucons should be adhered to.
4. Follow all instrucons – All operang and use instrucons should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet
basement or near a swimming pool, and the like.
6. Clean only with a dry cloth.
7. Do not block any venlaon openings. Install in accordance with the manufacturer’s instrucons.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
9. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other.
The wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and at the
point where it exits from the apparatus.
11. Only use aachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the
apparatus. When a cart or rack is used, use cauon when moving the cart/ apparatus combinaon to avoid injury
from p-over.
13. Unplug the apparatus during lighng storms or when unused for long periods of me.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any
way, such as; the power-supply cord or plug is damaged, liquid has been spilt or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. CAUTION: Servicing instrucons are for use by qualied service personnel only. To reduce the risk of electric shock, do
not perform any servicing other than that contained in the operang instrucons unless you are qualied to do so.
16. Do not install this equipment in a conned or built-in space such as a book case or similar unit. The equipment must
remain in well venlaon condions. Venlaon should not be impeded by covering the venlaon openings with items
such as newspaper, table-cloths, curtains etc.
17. WARNING: Only use aachments/accessories (such as the baery etc.) specied or provided by the manufacturer.
18. WARNING: Refer to the informaon on the underside of the enclosure for electrical and safety informaon before
installing or operang the apparatus.
19. WARNING: To reduce the risk of re or electric shock do not expose this apparatus to rain or moisture. The apparatus
shall not be exposed to dripping or splashing and objects lled with liquids, such as vases, shall not be placed on apparatus.
20. CAUTION: Danger of explosion if baery is incorrectly replaced. Replace only with the same or equivalent type.
21. WARNING: The baery shall not be exposed to excessive heat such as sunshine, re or the like.
22. WARNING: The all-pole mains switch located on rear panel is used as the disconnect device, the switch shall remain
readily operable.
23. WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.
24. Keep new and used baeries away from children. If the baery compartment does not close securely, stop using the
product and keep it away from children.
25. If you think baeries might have been swallowed or placed inside any part of the body, seek immediate medical
aenon.
Important Safety Instrucons

IPEX2100 Series Quick Install Guide
4
26. When the apparatus is not in use or during its relocaon, take care of the power cord and plugs; e.g. e up the power
cord with cable e or similar. The e must be free from sharp edges and the like that might cause abrasion of the power
cord. When put into use again ensure the power cord and plugs are not damaged. If any damage is found the power cord
and plugs should be replaced by items either specied by the manufacturer or that have same characteriscs as the original
items.
27. This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sucient magnitude to
constute a risk of electric shock.
28. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts
inside. Refer servicing to qualied personnel.
29. The exclamaon point within an equilateral triangle is intended to alert the user to the presence of important
operang and maintenance instrucons in the literature accompanying the appliance.
30. Protecve earthing terminal. The apparatus should be connected to a mains socket outlet with a protecve
earthing connecon.
31. CAUTION: To prevent electric shock hazard, replace grille. (CSA 60065, clause 5.3A)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR

IPEX2100 Series Quick Install Guide
5
The DigitalinxIP IPEX2101 encodes / transmits HDMI video and audio over a 1Gb network infrastructure using
h.264 AVC encoding with a congurable data rate up to 30 Mbps. The IPEX2101 supports video signals up to
1080p@60 Hz. The IPEX2101 outputs two video streams: one mulcast IP stream at the nave content resoluon
and 5 unicast video streams at 352x288 at 5 Hz to easily view a preview of the content on the DigitalinxIP Control
soware for Windows and iPad. An analog audio output port de-embeds 2 channel stereo audio from the embedded
HDMI content.
The IPEX2101 supports PoE and can be powered remotely by compable power source equipment, such as a
PoE Ethernet switch, eliminang the need for a nearby power outlet. Encoding control provides adjustments for
encoding bit rate and quality. The RS232 port operates in a pass-through capacity to control a third party device
such as an A/V switcher or other device.
The IPEX2101 requires an IPEXCB control interface and is compable with the IPEX2102, IPEX2002 and IPEX2102MV
streaming decoders. Only (1) one IPEXCB control interface is needed for an IPEX2100 matrix system.
The Digitalinx IP IPEX2102 decodes HDMI video and audio over a 1Gb network infrastructure using h.264 AVC
encoding. The IPEX2102 outputs video up to 1080p@60 Hz and can scale the video content either by user dened
preference or automacally based on the nave resoluon of the connected display while seamlessly switching
between sources. Depending on the needs of the installaon, mulple IPEX2102 devices can be congured to
make a video wall up to a 16x16 conguraon. An analog audio output port de-embeds 2 channel stereo audio
from the embedded HDMI content, while sll passing the audio to the HDMI output.
The IPEX2102 supports PoE and can be powered remotely by compable power source equipment, such as a
PoE Ethernet switch, eliminang the need for a nearby power outlet. The RS232 port operates in a pass-through
capacity to control a third party device such as a display or projector.
The IPEX2102 requires an IPEXCB control box and is compable with the IPEX2001 and IPEX2101 streaming
encoders. Only (1) one IPEXCB control interface is needed for an IPEX2100 matrix system.
Product Overview
IPEX2101 Encoder
IPEX2102 Decoder

IPEX2100 Series Quick Install Guide
6
Package Contents per Device
1. Installaon Guide
2. Power Supply with US, UK, EU, and AU adapters
3. 3-pin Removable Screw Terminal (2 ea)
4. Mounng Ears (2 ea)
IPEX2102MV Mul-view Decoder
The Digitalinx IP IPEX2102MV receives HDMI video and audio over a 1Gb network infrastructure using h.264 AVC
encoding with a congurable data rate up to 30 Mbps. The IPEX2102MV outputs video up to 4K and can scale the
video content either by user dened preference or automacally based on the nave resoluon of the connected
display. There are mulple preset mul view layouts available on the IPEX2102MV including a custom window
overlay mode where up to 6 sources can be placed and sized on a TV display or projector in any locaon. An analog
audio output port de-embeds the 2 channel stereo audio from the embedded HDMI content, while sll passing the
audio to the HDMI output.
The IPEX2102MV supports PoE and can be powered remotely by compable power source equipment, such as a
PoE Ethernet switch, eliminang the need for a nearby power outlet. The RS232 port operates in a pass-through
capacity to control a third party device such as a display or projector.
The IPEX2102MV requires an IPEXCB control box and is compable with the IPEX2001 and IPEX2101 streaming
encoders. Only (1) one IPEXCB control interface is needed for an IPEX2100 matrix system.

IPEX2100 Series Quick Install Guide
7
Front and Rear Panels
IPEX2101 Front Panel
IPEX2101
12
1. Power indicator
• When ON; encoder is powered on
• When OFF; encoder is powered o
2. Status indicator
• When ON; encoder detects valid input signal
• When BLINKING; encoder detects no input signal
• When OFF; encoder is powered OFF or in the boot up process
IPEX2101 Rear Panel
A. 12V DC power input
B. Analog audio output
C. HDMI input
D. RS232 Connecon
E. LAN connecon with PoE support
F. Factory default reset
RESET KEY
RESET LED
AB C D E F

IPEX2100 Series Quick Install Guide
8
IPEX2102 Front Panel
ID KEY
123
IPEX2102
1. Power indicator
• When ON; encoder is powered on
• When OFF; encoder is powered o
2. Status indicator
• When ON; encoder detects valid input signal
• When BLINKING; encoder detects no input signal
• When OFF; encoder is powered OFF or in the boot up process
3. Idencaon buon - Shows hostname / alias on TV display
IPEX2102 Rear Panel
A. 12V DC power input
B. Analog audio output
C. HDMI output
D. RS232 connecon
E. LAN connecon with PoE support
F. Factory default reset
RESET KEY
RESET LED
AB C D E F

IPEX2100 Series Quick Install Guide
9
IPEX2102MV Front Panel
IPEX2102MV
12 3
ID KEY
1. Power indicator (located on top)
• When ON; encoder is powered on
• When OFF; encoder is powered o
2. Status indicator (located on top)
• When ON; encoder detects valid input signal
• When BLINKING; encoder detects no input signal
• When OFF; encoder is powered OFF or in the boot up process
3. Idencaon buon - Shows hostname / alias on TV display
IPEX2102MV Rear Panel
A. 12V DC power input
B. LAN connecon with PoE support
C. Analog audio output
D. HDMI output
E. RS232 connecon
F. Factory default reset
G. Ground screw
AB C D E F G
RESET

IPEX2100 Series Quick Install Guide
10
System Consideraons
Gigabit Switch Features
Gigabit Switch Expansion
Gigabit Switch Size(s)
System Bandwidth
A high quality, managed Level 2 gigabit switch with a high bandwidth backplane should be used in the installaon,
preferably with PoE support. The two primary features to look for in the switch are support for mulcast and
support for IGMP querier / snooping, which are required technologies for stable mulcast video signals.
Be sure to verify the PoE gigabit switch can provide 15.4 was to each output under full load. Some switches
support 15.4 was per output but do not have enough available power under full load. For a 24 port switch, it
should be able to provide about 370 was to the LAN ports (24 x 15.4 = 369.6) plus power for the switch.
Quite oen, a switch will not have enough ports for a complete installaon. There are two methods to connect
switches together to expand the number of ports: cascading and stacking.
Cascading refers to connecng the copper LAN port from one switch to another. This is a low cost method of
expanding the number of ports, but the bandwidth is limited to the speed of the network port, which will become
an issue if the bandwidth of all the encoders exceeds the network ports speed.
Stacking refers to connecng the ber SFP port from one switch to another. This is a slightly more expensive opon,
but it does not interfere with the number of network ports needed for the installaon. The SFP port on modern
switches will oen support 10 Gbps pass through.
When calculang the size of switch needed, the following devices need to be considered:
If the installaon requires 14 sources and 10 displays, a 24 port switch will not have enough ports for the installaon,
because there are no open ports for the IPEXCB.
1. Number of sources
2. Number of displays
3. IPEXCB
4. Wireless access point for iPad app or Windows app (oponal)
5. Hardwire port for Windows app (oponal)
30 Mbps should be considered when calculang the bandwidth for the highest quality video seng for each
streaming encoder. This value covers the maximum quality 30Mbps encoded stream plus packet overhead. Ten
1080p sources using the highest quality video seng will be using approximately 300 Mbps of eecve bandwidth
on the backplane. The IPEX2101 series encoder supports Constant Bit Rate (CBR) and Variable Bit Rate (VBR)
sengs.

IPEX2100 Series Quick Install Guide
11
IPEXCB Controller
System Control
Heat and Venlaon
Backup Power
HDMI CEC
LAN Cabling
Source Content Resoluon
In addion to the gigabit switch, the IPEXCB is required for the encoders and decoders to communicate with each
other regardless of system layout, such as one to many.
There are mulple ways to control the system once installaon is complete. There is the DigitalinxIP Control
soware for iPad and Windows. While not recommended, the IPEXCB can be controlled through a web browser. A
third party controller can communicate directly with the IPEXCB via the LAN (CONTROL) port or via RS232.
All electronics generate heat, and excessive heat can cause electronic devices to fail prematurely. The IPEX2101,
IPEX2102 and the IPEX2102MV devices are passively cooled and should not be stacked on top of each other or
other devices. Please leave at least 1 ½ inches (approximately 35-40 mm) of open space by the side vents to
provide adequate airow. Please see www.libav.com for rackmounng opons.
The gigabit switch will likely have acve cooling. Please follow the manufacturer’s installaon instrucons for
proper mounng in an equipment rack.
It is always a good pracce to install a high quality UPS (uninterrupble power supply) with line ltering with
expensive electronics. The UPS can provide “clean” power to all the devices in the equipment rack while also
providing enough me to properly shut down connected devices in the event of an extended power failure.
The IPEX2102 and the IPEX2102MV can turn on and turn o connected displays via CEC. This technology has been
a part of the HDMI specicaon for years. The Digitalinx IP Control soware for Windows and iPad can turn on and
o the displays for easy end user control.
For all LAN cabling, the EIA/TIA-568B crimp paern must be used on Category 5e or greater cable. In areas with
large amounts of electromagnec (EM) or radio frequency (RF) interference, a shielded variety of Category 5e or
greater cable is recommended with shielded connectors on both ends of the selected cable.
Even though the IPEX2100 series devices support 1080i, this resoluon may cause arfacts through the encoding
process. Please set the output resoluon of devices showing 1080i content to 720p or 1080p.
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8

IPEX2100 Series Quick Install Guide
12
Installaon Instrucons
Basic Installaon
1. Congure the gigabit switch for IP video operaon. Liberty has guides for many common switch manufacturers
on the IPEXCB page on the Liberty website (www.libav.com).
2. Turn o power and disconnect the audio/video equipment by following the manufacturer’s instrucons.
3. Turn o power to the congured switch.
4. Connect Category 5E or greater twisted pair cable with the TIA/EIA-568B crimp paern between the LAN
port on the encoder(s) (IPEX2101) and the gigabit switch.
5. Connect Category 5E or greater twisted pair cable with the TIA/EIA-568B crimp paern between the LAN
port on the decoder(s) (IPEX2102, IPEX2102MV) and the gigabit switch.
6. If the gigabit switch cannot provide power or enough power to the IPEX2100 devices, connect the included
power supply to the 12V DC power input of the device. If the gigabit switch cannot provide enough power,
disable the PoE funcon of the connected LAN ports on the switch.
7. Connect an HDMI cable between the display and the decoder (IPEX2102, IPEX2102MV).
8. Connect an HDMI cable between the source and the encoder (IPEX2101).
9. Power on aached audio/video devices.
10. Apply power to the gigabit switch.
11. If the gigabit switch cannot provide power to the IPEX2101, IPEX2102 or IPEX2102MV, connect the included
power supply connected to the encoders and decoders to an AC outlet.
RS232 Connecons
Audio Output Connecons
To use the RS232 control transport capabilies of the IPEXCB or the RS232 extension capabilies of the IPEX2101
or IPEX2102 / IPEX2102MV, connect the TX, RX, and ground control signal wires to the removable 3-pole terminal
block. Consult the manual of the source or display device(s) to determine which pins the TX and RX signals are
carried on. Be sure to always connect TX to RX and RX to TX.
To use the analog audio outputs of the IPEX2101 or IPEX2102 / IPEX2102MV, connect the L, R, and ground wires to
the removable 3-pole terminal block. Connect the other end of the cable to an audio amplier.
TX
G
RX
RXD
TXD
GND
IPEX2000
Device
Source or
Display
L
R
G
L+
L-
R-
R+
IPEX2100
Device Amplier

IPEX2100 Series Quick Install Guide
13
IPEX2101 Technical Specicaons
Input/Output Connecons
HDMI Input One (1) HDMI Type A Receptacle
LAN One (1) 8P8C port (Shielded RJ45)
Power One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 Port One (1) 3-pin Removable Terminal Block Connector
Audio Output One (1) 3-pin Removable Terminal Block Connector
Supported Audio, Video and Control
Input Video Resoluon Support 640 x 480@60Hz, 480p@60Hz, 576i@50Hz, 576P@50Hz, 800 x 600@60Hz, 1024 x 768@60Hz,
720p@50Hz, 720p@60Hz, 1280 x 800@60Hz, 1280 x 1024@60Hz, 1360 x 768@60Hz, 1366 x
768@60Hz, 1400 x 1050@60Hz, 1440 x 900@60Hz, 1680 x 1050@60Hz, 1920 x 540@60Hz,
1080i@50Hz, 1080i@60Hz, 1080p@50Hz, 1080p@60Hz
Video Compliance HDMI 1.3 and HDCP 1.4
Embedded Audio PCM 2 Channel Stereo
De-embedded Audio 2 Channel Stereo
ARC (Audio Return Channel) No
HEC (HDMI Ethernet Channel) No
CEC (Consumer Electronics Control) Yes
Supported Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200
Streaming Signal Characteriscs
Maximum Distance (point to point) 100 m (328 )
Cable Requirements Solid Core Category 5e or greater with TIA/EIA-568B crimp paern
Encoding Data Rate Up to 30 Mbps, Support CBR and VBR
Encoding Method H.264/MPEG-4 AVC
End to End Latency Low Latency Mode: 50 ms
High Quality Mode: 250 ms
Chassis and Environmental
Construcon Black Steel
Dimensions (H x W x D) 25 mm x 100 mm x 175 mm (0.98in x 3.9 in x 6.9 in)
Operang Temperature 0° to +40° C (+32° to +104° F)
Operang Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power and Regulatory
Power Input 12V DC 1A or 48V DC PoE (Power over Ethernet)
Power over Ethernet (PoE) Compability 802.3af Alternave A
Power Consumpon 6 was
ESD Protecon 8kV air, 4kV contact
Regulatory FCC, CE, RoHS
Other
Warranty 5 years
Diagnosc Indicators Power and Status
Included Accessories Installaon Guide, Power Supply with US, UK, EU, and UK adapters, 3-pin Removable Screw
Terminal (2 ea), Mounng Ears (2 ea)
IP Controller IPEXCB
Compable Decoders IPEX2002, IPEX2102, IPEX2102MV
Distances and picture quality may be aected by cable grade, cable quality, source and desnaon equipment, RF and electrical interference, and cable
patches.

IPEX2100 Series Quick Install Guide
14
IPEX2102 Technical Specicaons
Input/Output Connecons
HDMI Output One (1) HDMI Type A Receptacle
LAN One (1) 8P8C port (Shielded RJ45)
Power One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 Port One (1) 3-pin Removable Terminal Block Connector
Audio Output One (1) 3-pin Removable Terminal Block Connector
Supported Audio, Video and Control
Input Resoluon Support From 480p@60Hz to 1920x1080@60Hz
Output Video Resoluon Support 640 x 480@60Hz, 480p@60Hz, 576P@50Hz, 800 x 600@60Hz, 1024 x 768@60Hz,
720p@50Hz, 720p@60Hz, 1280 x 800@60Hz, 1280 x 1024@60Hz, 1366 x 768@60Hz, 1400
x 1050@60Hz, 1440 x 900@60Hz, 1680 x 1050@60Hz, 1920 x 540@60Hz, 1080p@24Hz,
1080p@25Hz, 1080p@30Hz, 1080p@50Hz, 1080p@60Hz
Video Compliance HDMI 1.3 and HDCP 1.4
Embedded Audio PCM 2 Channel Stereo
De-embedded Audio 2 Channel Stereo
ARC (Audio Return Channel) No
HEC (HDMI Ethernet Channel) No
CEC (Consumer Electronics Control) Yes
Supported Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200
Streaming Signal Characteriscs
Maximum Distance (point to point) 100 m (328 )
Cable Requirements Category 5e or greater with TIA/EIA-568B crimp paern
Decode Support H.264/MPEG-4 AVC (IPEX2101, IPEX2001 only)
End to End Latency Low Latency Mode: 50 ms
High Quality Mode: 250 ms
Maximum Video Wall Size 16 x 16
Bandwidth up to 40Mbps
Chassis and Environmental
Construcon Black Steel
Dimensions (H x W x D) 25 mm x 100 mm x 175 mm (0.98in x 3.9 in x 6.9 in)
Operang Temperature 0° to +40° C (+32° to +104° F)
Operang Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power and Regulatory
Power Input 12V DC 1A or 48V DC PoE (Power over Ethernet)
Power over Ethernet (PoE) Compability 802.3af Alternave A
Power Consumpon 6 was
ESD Protecon 8kV air, 4kV contact
Regulatory FCC, CE, RoHS
Other
Warranty 5 years
Diagnosc Indicators Power and Status
Included Accessories Installaon Guide, Power Supply with US, UK, EU, and UK adapters, 3-pin Removable Screw
Terminal (2 ea), Mounng Ears (2 ea)
IP Controller IPEXCB
Compable Encoder IPEX2001, IPEX2101
Distances and picture quality may be aected by cable grade, cable quality, source and desnaon equipment, RF and electrical interference, and cable
patches.

IPEX2100 Series Quick Install Guide
15
Input/Output Connecons
HDMI Output One (1) HDMI Type A Receptacle
LAN One (1) 8P8C port (Shielded RJ45)
Power One (1) 5.5 mm OD, 2.6 mm ID Threaded Barrel
RS232 Port One (1) 3-pin Removable Terminal Block Connector
Audio Output One (1) 3-pin Removable Terminal Block Connector
Supported Audio, Video and Control
Input Resoluon Support From 480p@60Hz to 1920x1080@60Hz
Output Video Resoluon Support TILE MODE: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz,
1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1440x900@60Hz,
1400x1050@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz, 480p@60Hz,
576p@50Hz, 720p@30Hz, 720p@50Hz, 720p@60Hz, 1080p@24Hz, 1080p@), 1080p@30Hz,
1080p@50Hz, 1080p@60Hz, 1920x1200@60Hz, 3840x2160@24Hz, 3840x2160@30Hz
,3840x2160@60Hz
OVERLAY WINDOW MODE: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz,
1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz,
1440x900@60Hz, 1400x1050@60Hz, 1600x1200@60Hz, 1680x1050@60Hz,
1920x1200@60Hz, 480p@60Hz, 576p@50Hz, 720p@30Hz, 720p@50Hz), 720p@60Hz,
1080p@24Hz, 1080p@25Hz, 1080p@30Hz, 1080p@50Hz, 1080p@60Hz
Video Compliance HDMI 1.4/2.0 and HDCP 1.4
Embedded Audio PCM 2 Channel Stereo
De-embedded Audio 2 Channel Stereo
ARC (Audio Return Channel) No
HEC (HDMI Ethernet Channel) No
CEC (Consumer Electronics Control) Yes
Supported Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200
Streaming Signal Characteriscs
Maximum Distance (point to point) 100 m (328 )
Cable Requirements Category 5e or greater with TIA/EIA-568B crimp paern
Decode Support H.264/MPEG-4 AVC (IPEX2101, IPEX2001 only)
End to End Latency Low Latency Mode: 80 ms
High Quality Mode: 300 ms
Bandwidth up to 270Mbps – 9 mulcast group subscripons
Chassis and Environmental
Construcon Black Steel
Dimensions (H x W x D) 25 mm x 220 mm x 130.2 mm (0.98in x 8.7 in x 5.1 in)
Operang Temperature 0° to +40° C (+32° to +104° F)
Operang Humidity 20% to 90%, Non-condensing
Storage Temperature -10° to +60° C (+14° to +140° F)
Storage Humidity 20% to 90%, Non-condensing
Power and Regulatory
Power Input 12V DC 1A or 48V DC PoE (Power over Ethernet)
Power over Ethernet (PoE) Compability 802.3af Alternave A
Power Consumpon 6 was
ESD Protecon 8kV air, 4kV contact
Regulatory FCC, CE, RoHS
Other
Warranty 5 years
Diagnosc Indicators Power and Status
Included Accessories Installaon Guide, Power Supply with US, UK, EU, and UK adapters, 3-pin Removable Screw
Terminal (2 ea), Mounng Ears (2 ea)
IP Controller IPEXCB
Compable Encoder IPEX2001, IPEX2101
Distances and picture quality may be aected by cable grade, cable quality, source and desnaon equipment, RF and electrical interference, and cable
patches.
IPEX2102MV Technical Specicaons

Digitalinx IP is a brand of:
11675 Ridgeline Drive
Colorado Springs, Colorado
80921 USA
Phone: [phone]
Fax: [phone]
Toll-Free: 800-530-8998
Email: [e-mail]