Digitax X-one User manual

Taximeter & Mobile Data Terminal
Technical Manual
Installation and Programming
ver. 1.0
10/07/2018

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
3
Introduction ..............................................................................................................................................................................4
About this Manual...................................................................................................................................................................4
X-One Android Android Taximeter Display.........................................................................................................................5
Metrological Inscriptions Plate ............................................................................................................................................5
X-ONE Android Taximeter - Main Features........................................................................................................................6
X-ONE Android MDT - Main Features.................................................................................................................................8
X-ONE MID Taximeter Display Area.....................................................................................................................................10
Functional area for Developer’s Applications ....................................................................................................................10
Different Taximeter Window Positions and Color Sets....................................................................................................10
Appearance ...............................................................................................................................................................................11
How to Seal the Taximeter ....................................................................................................................................................12
Regular Way of Sealing the Taximeter ...............................................................................................................................12
Measures...................................................................................................................................................................................13
Electrical Connection Table...................................................................................................................................................14
Electrical Speci!cations ........................................................................................................................................................15
Blocking Wires.........................................................................................................................................................................17
Dashboard Fitting....................................................................................................................................................................18
Windscreen Fitting..................................................................................................................................................................20
Combo Antenna Installation ..................................................................................................................................................21
Connectors and Cables...........................................................................................................................................................22
Ports Mapping..........................................................................................................................................................................24
Mechanical Movement Sensor ........................................................................................................................................25
Test Connector.........................................................................................................................................................................26
“E-Seal”- Electronic Sealing:..............................................................................................................................................27
1st Section: Last 100 Reading Changes Done...................................................................................................................27
“E-Seal”- Electronic Sealing:..............................................................................................................................................28
2nd Section...............................................................................................................................................................................28
For Hire - Stopped - Hired.....................................................................................................................................................29
The Operative Mode................................................................................................................................................................29
Pre-Selection of the Tariff.....................................................................................................................................................30
The K-Constant ........................................................................................................................................................................31
(Car Transmission Ratio).......................................................................................................................................................31
Time and Date setting ............................................................................................................................................................32
How to set the taximeter’s time and date..........................................................................................................................32
Time Synchro............................................................................................................................................................................33
Diagnostic Tariff Test (Check Sum).....................................................................................................................................34
Statistical Memory..................................................................................................................................................................35
How to Read the Locations Memory Content ....................................................................................................................35
Statistical Memory..................................................................................................................................................................36
How to Print Locations Memory Content............................................................................................................................36
Statistical Memory..................................................................................................................................................................37
How to Erase the Locations Memory Content ...................................................................................................................37
“Trip by Trip”............................................................................................................................................................................38
Events Memory Buffer............................................................................................................................................................38
“Trip by Trip”............................................................................................................................................................................39
Print Out Format......................................................................................................................................................................39
Ticket Print Out: Settings......................................................................................................................................................40
Ticket Print Out: Receipt Copy .............................................................................................................................................40
The Tariff...................................................................................................................................................................................41
General Description.................................................................................................................................................................41
The Tariff...................................................................................................................................................................................42
How to Program the Tariff.....................................................................................................................................................42
Tariff Show................................................................................................................................................................................43
The “ProgDate”........................................................................................................................................................................45
Programming Keys ..................................................................................................................................................................46
Programming Parameters......................................................................................................................................................47
User and Demo Software .......................................................................................................................................................67
Note............................................................................................................................................................................................74
INDEX

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
4
The X-ONE Android Taximeter is designed to be, at the same time, easy to use and extremely
powerful. This manual is conceived to be user friendly, more graphical and easy to understand.
In the first section are described the electrical connections, the ways to fix and lead the taxime-
ter, how to assemble the sensor box.
The second section explain the meter’s operative modes, the functions and the programming
phase (Autotest, Statistical Memory, “Trip by Trip” buffer and the Tariff programming).
The third sections contains the description of all the tariff programming parameters.
Introduction
About this Manual

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
5
X-ONE Android MID Taximeter Display
Display Composition and Inscriptions
7
6
1
812
5
9
11
234
10
13
1Day / Night Indication 6Passenger detection status 11 Description (Extras/Time)
2Tariff Index 7Tariff index 12 Trademark
3Fare Display 8Fare (!) 13 Model
4
Status (For Hire, Hired,
Stopped)
93rd Display (i.e. Distance)
5Secondary Display 10 4th Display (i.e. Waiting time)
Metrological Inscriptions Plate
10R-05 XXXXX
12
3
5
6
4
10
9
87 11
1E-Mark Number
2Approval E-Mark Number
3
EC. Type examination certi"cate number
4Bios Firmware CRC Version
5Noti"ed Body Number
6CE Mark
7Veri"cation Year
8Temperature range
9Voltage range
10 K-Costant range
11 Serial Number

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
6
X-One Android Taximeter
The new X-One Android device is industrial grade and automotive certificate mobile data terminal with stand-alone embedded taximeter.
FULLY CERTIFIED EMBEDDED TAXIMETER Special features:
The Taximeter runs on a dedicated standalone CPU, which make possible to certify the sole taximeter independently than Androids system and apps
leaving free developers to keep updated their android application without involve taximeter certifications.
Furthermore the taximeter, been based on completely HW & SW CPU independent from Android system, will continue fully working even in case of
android freeze, restarts, shut down ecc.
The mechanical buttons and printer are HW connected directly to the taximeter CPU, so in case android freeze or corrupts, as in this event the display
and touchscreen will be not working, the taximeter can still be operated from mechanical bottoms and the journey amount and data printed on the receipt.
The custom Digitax/Android OS, do not allow to any application to overwrite the reserved windows for the traximeter.
Digitax’s new generation device provided with multi-mode LTE Cat.4 module and Android 6.1/7.1 OS. It includes short-range wireless communication via
Wi-Fi 802.11b/g/n and BT4.1 LE, and offers data rates up to 150 Mbps.
The device also combines high-speed wireless connectivity with embedded multi-constellation and high-sensitivity GPS+GLONASS+BeiDou receiver
for positioning.
A rich set of interfaces ad devices (embedded double Camera 2 and 5 Mpix,and or external ethernet IP Camera 7” Graphic display at 1024x800 resolution
provided with capacitive Touch Panel, internal mic and speaker and or external microphone inputs and speaker audio outputs, a huge sets of UART
peripherals), extend its functionalities the and permits the use of this devices in a wide range of applications and cases.
DUAL CPU
Primary CPU: Qualcom Quad Cortex 1.4GHz processor with Adreno 304 GPU, OpenGL ES 3.0, OpenCL, DirectX, content security and QDSP6 DSP
inside, allows this Device to supply a remarkable flexibility and efficiency in computing power, together with reduced power consumption.
Secondary CPU: AITP (Automotive Intensive Task Processor) dedicated to the embedded taximeter furthermore supplies the necessary functionalities in
the automotive field, like power management, Safe Shutdown, Wheel Pulses Odometer, Distance and Speed calculation, Wake-Up on Ring, Over-the-Air
services for software and firmware updates. The AITP is OTA programmable for remote automatic firmware and tariff upgrade, and is always powered
ON; it can turn-ON and OFF the Device and its peripherals.
IDEAL FOR FLEET MANAGEMENT AND TAXIMETER JOB DISPATCHING
The Device represents the state-of-the-art device for job dispatching certified taximeter, security and fleets management, an ALL-IN-ONE industrial grade
and automotive compliant, powerful and compact solution.
Its 4G LTE modem allows very reliable communication with operating headquarters.
The vehicle is located by the high performance GPS/GLONASS/BeiDo receiver.
CUSTOMIZABLE USER INTERFACE
The 7 inches 16:9 clear readable TFT Displays with HD 1024x800 @60fp resolution allow to develop versatile and high accessible applications, thanks
also to the integrated TouchScreen controller, and to the 6 keys with LEDs available.
Hardware Keys avoid consumption and damage of Touch Screen for heavily used operations.
to choose The ambient light sensor allows an optimal brightness of the display in any environmental light.
The power key is a Smart Power Button, completely programmable and used to perform several important tasks.
Can be also disabled or programmed to trigger Ghost Mode (fake shutdown).
STEALTH MODE
Stealth mode is a special operating mode in which the system is working but the display and audio is OFF.
This feature can be useful in several situations:
Driver Control: System has also the wake up on ring feature, so at the central it is possible to remotely turn-ON the device (also in stealth mode so nobody
can see that it is starting) in order to check vehicle position, internal audio listening and other data.
Ghost Mode: It is possible to set the device so that after pressing the shut down but on the system goes on stealth mode instead of turning OFF. This
feature is useful if you want the device to remain always ON (it turns OFF only the display, reducing power consumption)or in an alarm situation.
Alarm managing: If system is OFF and alarm but on is pressed the system can be started in stealth mode, so nobody can see that the system starts.
On this special start the system can be programmed for example to send an alarm message to the central, GPS position or also screenshots or audio..
HIGH AVAILABILITY
The Device has been designed for professional automotive application, it is fully automotive certified, can withstand glitches at car engine start, over
voltage up to 32V and immunity to ESD and EMC interferences
The AITP processor gives time to user applications and Android O.S. to close gracefully and safely in case of sudden disconnection of the Main Power.
INPUTS AND OUTPUTS
The Device supplies a wide range of communication channels with the external environment: Hi-Speed USB 2.0 Host, one USB Device and up to 7 RS232
and RS485 Serial Ports.
The special programmable digital inputs and outputs allow to control devices and read signals coming from generic external equipment’s.

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
7
Display
Viewing area 7” diagonal
Aspect Ratio 16:9
WVGA 1024x800 Resolution
Colour TFT LED Display
Display clearly viewable with 500 cd/m2
Ambient Light Sensor with Automatic Regolation
Touchscreen
Capacitive Touch screen.
Extended Temperature Range
CPUs
Fanless Device with Primary CPU Qualcom Quad
Cortex 1.4GHz. Adreno 304 GPU: OpenGL ES
3.02, OpenCL3, DirectX, content security, and
decreased power consumption4
Secondary M16 CPU for Taximeter and
Automotive Intensive Tasks
Ram Memory
+1GB LPDDR3
Storage Solid State Hard Disk
Memory
8GB EMMC
External SD
Up to 256 GB for external storage
Communication Modem
LTE Cat 4
GSM / GPRS Class 12 HSUPA Modem with
150Mbit/s downlink and 50Mbit/s uplink data rates
based on LTE network (max)
Warm reset and cold reset (dedicated electronic
circuit) available through API calls
2 Sim Card slots.
GPS Receiver
Multi-constellation GNSS receiver available for
applications requiring fast and accurate fixes in any
environment.
Antennas
Internal GPS-WiFi-BT-LTE or
External GPS-WiFi-BT-LTE Rugged Combo
antenna (option)
USB Ports
2 USB 2.0 Host (with USB Support for Mouse and
Keyboard) Hi-Speed
1 USB 2.0 / OTG Host / Device
Serial Ports
1 External Full Modem RS232 Port
2 External TX/RX RS232 / RS485 Port
4 External RS232 Serial Ports (option)
I/O ports connection
3 Digital Inputs
3 + 5 Power Output Ports
Dedicated Ignition input
2 Analog Ports input
External Speakers output
External Microphone input
Alarm and Security
Panic Button input / Emergency Switch input
Stealth Mode Controller (system ON display, audio
and lightings off)
Hardware Keys
6 Lighted and Software programmable Hardware
Buttons
Power on key
1 Smart Power On/Off button
Multimedia
Audio: MP3, AAC+,eAAC, AMR-NB, -WB, G.711,
WMA 9/10 Pro
Video: Encode:30fps 720P (H.264), 30fps WVGA
(MPEG-4/VP8)
Decode:30fps 1080P (H.264/MPEG-4/VP8/H.265
DivX4/5/6), 30fps WVGA (H.263)
Internal and external Speaker and Microphone
Supports wave speaker volume control
API provided
Soft/Hard Reset
Soft Reset available through HW switch
Soft Reset available through API calls
Connectivity
Ethernet: 10/100 Mbps LAN Controller
Wi-Fi Connection
2.4G/5.8G, 802.11 a/b/g/n
Bluetooth class 2
BT2.1+EDR/3.0/4.1 LE
Operating System
Android 6.0/7.1
Development Tools
Adb/Android Studio IDE with USB debugging
support
SDK for Android O.S.
Sample code for SDK
Digitax Framework (Digitax Libraries): GPS,
Odometer, Taximeter, Hardware Keys, WatchDog,
OTA, Stealth Mode Controller, Logs, And Restore,
Light Dimmer, Hardware Identification, Alarm, Card
Reader and Windows Status
Serial port driver and test tools
Digital I/O driver
System diagnostic tools
On Field Test (OFT) OnBoard Diagnostic Utilities
included, with Customizable CheckList to make
tests of GPS Fix, GPS Antenna, GPRS Connectivity
and Base Station Signal Quality, Odometer, Ignition,
Panic Button, TouchScreen calibration, Hardware
Keys, Ambient Light Sensor, Device version, OS
Version, AITP Version, Taximeter, UPS and Battery
Status, Roof Light, Navigation Software
All On Field Tests and enrolling features can be
used during first installation and swap of devices.
OS Image Loader
Over The Air (OTA) OS image loader or microSDHC
Card Image Loader
System Update Fleet Manage-
ment
Professional OTA (Over The Air) CLIENT allows the
update of the whole Operating System and all the
CPUs Firmware (option).
Professional OTA (Over The Air) SERVER with
vehicles enrolling, group management and selective
update, remote debugging and logging. Web based
user interface (option)
Taximeter
Embedded Taximeter (Full Firmware and TARIF OTA
Programmable)
Power Supply
8 - 32 V with Surge Protector
Battery
Internal Battery Package (option)
Mounting
All the External Connectors, Accessible slots (such
as SIM Card, Micro SDHC, USB, etc.) and Screws
are Mechanically Sealed
Operating Temperature
-20°C to 75°C
Humidity
Humidity up to 95% non-condensing.
Vibration
Vibration Sine wave, 10 ~ 500 ~ 10Hz, 1.5G,
0.37oct/min 3 axis, 1hour/axis.
Dust Ingress Protection
All connectors covers sealed, no open holes
Dimension
204 mm x 120 mm x 35 mm (WxHxD)
Weight
545 g
X-One Android Taximeter
Main Features

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
8
X-One Android MDT
The new X-One Android device is an industrial grade and automotive certified mobile data terminal
Digitax’s new generation device provided with multi-mode LTE Cat.4 module and Android 6.1/7.1 OS. It includes short-range
wireless communication via Wi-Fi 802.11b/g/n and BT4.1 LE, and offers data rates up to 150 Mbps. The device also combines high-speed wireless
connectivity with embedded multi-constellation and high-sensitivity GPS+GLONASS+BeiDou receiver for positioning.
A rich set of interfaces and devices (embedded double Camera 2 MP and 5 MP and or external ethernet IP Camera 7’ Graphic display at 1280x800
resolution provided with capacitive Touch Panel, internal mic and speaker and or external microphone inputs and speaker audio outputs, a huge set of
UART peripherals), extend its functionalities and permits the use of this devices in a wide range of applications and cases.
DUAL CPU
Primary CPU: Qualcom Quad Cortex 1.4GHz processor with Adreno 304 GPU, OpenGL ES 3.0, OpenCL, DirectX, content security and
QDSP6 DSP inside, allows this Device to supply a remarkable flexibility and efficiency in computing power, together with
reduced power consumption.
Secondary CPU: AITP (Automotive Intensive Task Processor) dedicated to the necessary functionalities in the automotive field, like power
management, Safe Shutdown, Wheel Pulses Odometer, Distance and Speed calculation, Wake-Up on Ring, Over-the-Air
services for software and firmware updates. The AITP is OTA programmable for remote automatic firmware and tariff upgrade,
and is always powered ON; it can turn-ON and OFF the Device and its peripherals.
IDEAL FOR FLEET MANAGEMENT
The Device represents the state-of-the-art device for security and fleets management, an ALL-IN-ONE industrial grade and automotive compliant,
powerful and compact solution.
Its 4G LTE modem allows very reliable communication with operating headquarters.
The vehicle is located by the high performance GPS/GLONASS/BeiDo receiver.
CUSTOMIZABLE USER INTERFACE
The 7 inches 16:10 clear readable TFT Display with HD 1280x800 @60fps resolution allows to develop versatile and high accessible applications, thanks
also to the integrated TouchScreen controller and to the 6 hardware keys with LEDs available.
Hardware Keys avoid consumption and damage of Touch Screen for heavily used operations.
The ambient light sensor allows an optimal brightness of the display in any environmental light.
The power key is a Smart Power Button, completely programmable and used to perform several important tasks.
Can be also disabled or programmed to trigger Ghost Mode (fake shutdown).
STEALTH MODE
Stealth mode is a special operating mode in which the system is working but the display and audio is OFF.
This feature can be useful in several situations:
Driver Control: System has also the wake up on ring feature, so at the central it is possible to remotely turn-ON the device (also in stealth mode so
nobody can see that it is starting) in order to check vehicle position, internal audio listening and other data.
Ghost Mode: It is possible to set the device so that after pressing the shut down button the system goes on stealth mode instead of turning OFF. This
feature is useful if you want the device to remain always ON (it turns OFF only the display, reducing power consumption)or in an alarm situation.
Alarm managing: If system is OFF and alarm button is pressed the system can be started in stealth mode, so nobody can see that the system starts.
On this special start the system can be programmed for example to send an alarm message to the central, GPS
position or also screenshots video or audio.
HIGH AVAILABILITY
The Device has been designed for professional automotive applications, it is fully automotive certified, can withstand glitches at car
engine start, over voltages up to 32V and immunity to ESD and EMC interferences
The AITP processor gives time to user applications and Android O.S. to close gracefully and safely in case of sudden disconnection
of the Main Power.
INPUTS AND OUTPUTS
The Device supplies a wide range of communication channels with the external environment: Hi-Speed USB 2.0 Host, one USB Device
and up to 7 RS232 and RS485 Serial Ports and Ethernet.
The special programmable digital inputs and outputs allow to control devices and read signals coming from generic external equipments.

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
9
X-One Android MDT
Main Features
Display
Viewing area 7” diagonal
Aspect Ratio 16:9
WVGA 1024x800 Resolution
Colour TFT LED Display
Display clearly viewable with 500 cd/m2
Ambient Light Sensor with Automatic Regolation
Touchscreen
Capacitive Touch screen.
Extended Temperature Range
CPUs
Fanless Device with Primary CPU Qualcom Quad
Cortex 1.4GHz. Adreno 304 GPU: OpenGL ES
3.02, OpenCL3, DirectX, content security, and
decreased power consumption4
Secondary M16 CPU for Automotive Intensive
Tasks
Ram Memory
+1GB LPDDR3
Storage Solid State Hard Disk
Memory
8GB EMMC
External SD
Up to 256 GB for external storage
Communication Modem
LTE Cat 4
GSM / GPRS Class 12 HSUPA Modem with
150Mbit/s downlink and 50Mbit/s uplink data rates
based on LTE network (max)
Warm reset and cold reset (dedicated electronic
circuit) available through API calls
2 Sim Card slots.
GPS Receiver
Multi-constellation GNSS receiver available for
applications requiring fast and accurate fixes in any
environment.
Antennas
Internal GPS-WiFi-BT-LTE or
External GPS-WiFi-BT-LTE Rugged Combo
antenna (option)
USB Ports
2 USB 2.0 Host (with USB Support for Mouse and
Keyboard) Hi-Speed
1 USB 2.0 / OTG Host / Device
Serial Ports
1 External Full Modem RS232 Port
2 External TX/RX RS232 / RS485 Port
4 External RS232 Serial Ports (option)
I/O ports connection
3 Digital Inputs
3 + 5 Power Output Ports
Dedicated Ignition input
2 Analog Ports input
External Speakers output
External Microphone input
Alarm and Security
Panic Button input / Emergency Switch input
Stealth Mode Controller (system ON display, audio
and lightings off)
Hardware Keys
6 Lighted and Software programmable Hardware
Buttons
Power on key
1 Smart Power On/Off button
Multimedia
Audio: MP3, AAC+,eAAC, AMR-NB, -WB, G.711,
WMA 9/10 Pro
Video: Encode:30fps 720P (H.264), 30fps WVGA
(MPEG-4/VP8)
Decode:30fps 1080P (H.264/MPEG-4/VP8/H.265
DivX4/5/6), 30fps WVGA (H.263)
Internal and external Speaker and Microphone
Supports wave speaker volume control
API provided
Soft/Hard Reset
Soft Reset available through HW switch
Soft Reset available through API calls
Connectivity
Ethernet: 10/100 Mbps LAN Controller
Wi-Fi Connection
2.4G/5.8G, 802.11 a/b/g/n
Bluetooth class 2
BT2.1+EDR/3.0/4.1 LE
Operating System
Android 6.0/7.1
Development Tools
Adb/Android Studio IDE with USB debugging
support
SDK for Android O.S.
Sample code for SDK
Digitax Framework (Digitax Libraries): GPS,
Odometer, Taximeter, Hardware Keys, WatchDog,
OTA, Stealth Mode Controller, Logs, And Restore,
Light Dimmer, Hardware Identification, Alarm, Card
Reader and Windows Status
Serial port driver and test tools
Digital I/O driver
System diagnostic tools
On Field Test (OFT) OnBoard Diagnostic Utilities
included, with Customizable CheckList to make
tests of GPS Fix, GPS Antenna, GPRS Connectivity
and Base Station Signal Quality, Odometer, Ignition,
Panic Button, TouchScreen calibration, Hardware
Keys, Ambient Light Sensor, Device version, OS
Version, AITP Version, UPS and Battery Status,
Roof Light, Navigation Software
All On Field Tests and enrolling features can be
used during first installation and swap of devices.
OS Image Loader
Over The Air (OTA) OS image loader or microSDHC
Card Image Loader
System Update Fleet Manage-
ment
Professional OTA (Over The Air) CLIENT allows the
update of the whole Operating System and all the
CPUs Firmware (option).
Professional OTA (Over The Air) SERVER with
vehicles enrolling, group management and selective
update, remote debugging and logging. Web based
user interface (option)
Power Supply
8 - 32 V with Surge Protector
Battery
Internal Battery Package (option)
Mounting
All the External Connectors, Accessible slots (such
as SIM Card, Micro SDHC, USB, etc.) and Screws
are Mechanically Sealed
Operating Temperature
-20°C to 75°C
Humidity
Humidity up to 95% non-condensing.
Vibration
Vibration Sine wave, 10 ~ 500 ~ 10Hz, 1.5G,
0.37oct/min 3 axis, 1hour/axis.
Dust Ingress Protection
All connectors covers sealed, no open holes
Dimension
204 mm x 120 mm x 35 mm (WxHxD)
Weight
545 g

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
10
Different Taximeter Window Positions and Color Sets
4 Taximeter Window Postions
3 Taximeter Window Color Sets
X-One Android Mid Taximeter Display Area
Functional area for Developer’s Applications
800 x 97 px
MID Taximeter Area:
This area is used by the taximeter
800 x 383 px
Developer’s Functional Area:
This area is a functional area for developer’s applications
800 x 97 px
800 x 383 px
Note:
The MID Taximeter Area cannot be overwritten by user’s applications

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
11
Main Connectors Panel
Appearance
13
15 2 10
12
11
16
Main Connectors Panel
1GPRS Antenna MMCX jack 9Headphone/Mic Jack
2GPS AntennaSMB plug 10 Digital I/O - USB
3
Mini Client USB port for ADB
Connection
11 Taximeter Connector
Printer Connector
4Mov Sensors Connector/Can 12 Sim Card 1 Holder
5Power Connector 13 Speaker
6Serial COM 14 Micro SD Slot
7Sim Card 2 Holder 15 Test Connector
8Host USB Port 16 Lan Ethernet
6
4
14
93
8
15
8
15
14
7
i
C t P
l
p
p
earance

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
12
How to Seal the Taximeter
Regular Way of Sealing the Taximeter
X-One Android Taximeter’s Seals
1USB Seal
2Tariff Cover Seal
3SD Sealing Cover
4Taximeter Head Seal
5SIM CARDs Cover Seal
Rear View
Top View
1
2
3
4
5

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
13
Top
Front
Dimensions (in millimeters)
Width
204
Height
120
Depth
35
Weight (in grams)
X-One Android
560
Measures
Right Side View Left Side View
204,00
120,00 35,00

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
14
Passenger Sensor
Panic Buon
PINK
RED x 2
BLACK
fuse 2 A
ENGINE
WHITE
fuse 2 A
USB CLIENT
USB HOST
COM
TRANSDUCER / CAN
ODOMETER
PRINTER
Input / Output
fuse 2 A
CAR LIGHT SWITCH
+12 V
BROWN
WHITE/VIOLET
GREY (F)
GREEN (H)
VIOLET (G)
YELLOW (J)
fuse 2 A
fuse 2 A
fuse 2 A
fuse 2 A
ANTENNA
Electrical Connection Table

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
15
Electrical Speci•cations
Power Supply (Vcc): Operating Range: 8 to 32 V
Range of device constant: k = 500 km"¹ to 65535 km"¹
Resolution of device constant: 1 km"¹
Range of time tariff: 0.10¹ CU/h to 6553.50 CU/h
Resolution of time tariff: 0.10 CU/h
Range of distance tariff: 0.10 CU/km to 6553.50 CU/km
Resolution of distance tariff: 0.10 CU/km
Odometer Transducer Input:
input range: 0 to 32 V
level for LOW voltage: 0 - 0.3 V
level for HIGH input: 5 - Vcc to 32 V
maximum frequency: 1 KHz
high voltage trigger: high - low transition
Passenger Sensor:
Input range: 0 to 32 V
maximum level for LOW input: 1.4 V
Engine Input:
Input range: 0 to 32 V
maximum level for LOW input: 1.4 V
Taxi Light Output:
Maximum Current: 3 A
Output Voltage: Vcc
Lights Outputs:
Maximum Current: 1 A
Output Voltage: Vcc
Printer Power Out:
Maximum Current: direct from Vcc input
Output Voltage: Vcc
RS-232 serial ports: Taximeter COM1, COM2
Android COM5, COM6, COM7
(optional COM8, COM10, COM11, COM12)
Panic Button

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
16
Blocking Wires
Place the connector’s wires as indicated
in the following images.

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
17
Blocking Wires
Be sure to not cover with the wires the screw
holes
Fix them with the cable blocking plate
Close the back connectors cover •xing the
screws.
Cut the rubber cover and place both in the
back cover.

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
18
Dashboard Fitting
Clean the dashboard surface that the bracket is to
be •xed to with a clean cloth with alcohol or a suit-
able cleaning (de-grasing) solution
Place the bracket in position without removing the
protective •lm.
Carefully model the bracket wings to •t the dash-
board.
Make sure the surface is grease and polish free.
Press the bracket wings down into position on the
dashboard.
Remove the protective •lm from the glue pad on the
base of the bracket.
1 2
3
5
4
6

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
19
Dashboard Fitting
Gently warm the dashboard where the bracket is to
be •tted.
Firmly press the bracket into position to obtain the
best adhesion pressure.
Fix the X-One Android to the bracket using the
screws provided.
Gently warm the adhesive pad on the bracket in the
same way.
Adjust the ball bracket so the face place is in the
best position to allow the X-One Android to be
•tted to it.
Adjust the bracket so the taximeter screen is in the
best position for the driver.
7 8
9
11
10
12

The information contained here are property of DIGITAX Automotive Electronics Italy, and extremely confidential. Any disclosure, copying, distribution to third
party is strictly prohibited.
20
Windscreen Fitting
Make sure the required area is clean, grease and
polish free.
Warm the glass where the bracket is to be •tted.
Firmly press the bracket onto the glass to obtain the
best adhesion possible.
Make sure the required area is clean, grease and
polish free.
Remove the protective •lm from the adhesive pad
on the base of the bracket.
Using the screws provided •x the taximeter to the
bracket.
1 2
3
5
4
6