Digitech Audio Visual AP4002 User manual

Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmetre
NSW 2116 Australia
Ph: 1300 738 555
Int’l: [phone]
Fax: [phone]
www.techbrands.com

adapter
3 Troubleshooting
Product Profiles
User Guide
Function Operation
Menu Use Guide
Do not look into the lens while the projector is
switched ON to avoid inconvenience to the eye.
Do not place the projector on articles which may
obstruct ventilation.
1
2
2
3
5
6
11
12
Please use power supply indicated on the projector.
To avoid electric shock keep it away from rain and
any dampness.

Max. supported
SD card memory 32G
AV、VGA、USB、SD、
HDMI、Micro USB
2 (8Ω2W)
TFT LCD
12V-2.5A/5V-2A
150
1.07-3.31meters
System Keystone ±15° hand adjustment
Optical keystone function to optimize proportionality
of image.
Mode shift freely.
Mini USB slot, could connect with power bank
(note:must be 2A power bank).
Multimedia
(Andriod OS: optional )
All sealed & high efficient cooling design, enhance
product stability and life time.
Super low noise and dust free design, frees you from
internal cleaning.
English, Chinese,
etc. (23 languages)
285X180X115MM
Power
consumption
adapter
3 in 1 AV cable
0.68KG
1.2
1.3
Product Profiles
1.
1.1
Product Features AP4002
Projector AV Mini With HDMI/USB/VGA/SD 150
Lumens.
Long life 30,000 hours RGB-LED lamp providing a
colorful and detailed viewing experience.
Digital zooming function and free image size setting.
Low power consumption of 30W.

Power UP Channel
Left
Menu
Ch e c k
Down Back
Right
VGA
IR
HDMI
Keystone
AV
DC IN 5V 2A
Headphone
SD
DC IN 12V 2.5A
US B
2.1
Connection
User Guide
2.

2.2
2.2.1
2.3
Menu Use Guide
A. Signal channel choose
Press the Input button on the remote
control, then use “ ” or “ ” button to
choose the different signal channel, press
OK button to confirm
Function Operation
2.2.2
On connecting and switching ON the power adapter the
projector enters Standby mode.
Place the projector vertical to the projector screen and
rotate lens until a clear image can be viewed.
To Switch ON the projector press the power button on the
projector or the remote control once.
To Switch OFF the projector press the power button on
the projector or the remote control once.
On selecting Media signal source, interface
above pops up. Choose the file you desire to
play through the appropriate library (Photo,
Music, Movie or Text).

HDMI
HD MI
H D M I
U S B U S B
H D M I
2. HDMI connect HD device or mobile
(1) Use HDMI cable to connect projector with HDMI source.
(2) MHL cable connect with mobile
Select HDMI mode in source menu using
control buttons on projector or remote control.
Select PC mode in source menu using control
buttons on projector or remote control.
connect mobile
1. Connect laptop
Prior to connecting to laptop validate presence of VGA card
drive. Adjust laptop settings to duplicate screen. If through PC
no need to change settings. Connect using a VGA cable (not
provided).
VGA cable to connect projector with computer.
3. AV slot connect
connect the device with
AV slot
Select AV mode in source menu using control
buttons on projector or remote control.

C. Upgrade software
Procedure:
Insert flash drive with software. Open the projector and
choose USB through source. Select MENU button and
press “ ” button. Find software upgrade in setup and press
ok to confirm upgrade. Projector will restart in 30 minutes
and upgrade would be complete.
D.Projector image reverse
Press MENU button and enter MENU
screen. Choose left_right reverse in
image button. Press OK to confirm.
2. Left right reverse, then press
“ ” button then you could find the
up&down reverse button, press OK
button confirm.
E. Language shift
Use remote control MENU button come to menu, find the
menu language in the setup, choose language
4. USB SD connection
Put the USB or SD card
insert corresponding slot,
then choose corresponding
channel in the signal
B. Menu image
Press the Menu button on the
remote control to reach Menu.
Toggle using direction arrows.
Press OK to select.

Troubleshooting
3.
On encountering the following faults please perform
corresponding checks.
Fault check
Out of power/can't
open the projector
No image and sound
Has sound no image
Has image no sound
Image is dim
Color dim
Close automatically
Check if the power supply is connected
properly
Check the input signal source and
connection again.
Check if signal is connected correctly.
Check for brightness, contrast ratio.
Might have been adjusted to low value.
Check if input is connected correctly.
The sound must have been adjusted
to lowest previously.
Check lens if zoom right, projected
distance is far away, input signal should
be working.
Check for color and color temperature.
Take off the power supply , and restart it
Don't use new and old battery at the same time in remote control.
This would reduce operational efficiency. Remove the batteries if
not in use for a long time.
2.4
Remote Control
Mute
Menu
Previous
UP
Left
Input
Play/Pause
Power
Next
Right
OK
Down
Zoom
Pic
Vol+
Vol-
ESC
Turn
Info Repeat
FF
FR