Digitus DA-70300 User manual

Digitus USB3.0 To SATAII Adapter Cable
Model: DA-70300
USER´SMANUAL
Features:
First, thank you for purchasing our latest product of DA-70300: USB3.0 to SATA II Adapter cable.
It can be easily connected to computer and 2.5´´/3.5´´ HDDs, and enjoy the fast speed of the
data transferring among them. Also it can connect other devices which are with SATA port.
Moreover, the length of the USB3.0 cable is 120cm, you can put HDD at on the any suitable
place.
Specification:
● Compliant Universal Serial Bus 3.0 Specification, Down- compatible with USB2.0, & USB 1.1
Specification.
● UASP support for queued commands, 20% increase in peak performance, more for random
access, >50%reduction in CPU overhead.
● Support SATA1.5Gbps/3.0Gbps speed negotiation
● Support SATA2.5” and 3.5” HDD, up to 2TB
● Power: Input: AC 100~240,50/60Hz, Output: DC 12V 2A
● LED indicating
● Support Windows 7/Vista32-bit(SP1)/XP(SP1/SP2/SP3)
Product Graphic:

USAGE:
1. Check your hard disk, USB3.0 TO SATAII Adapter Cable and AC power supply are ready for
using.
2. Connect the SATA port of product to hard disk (device with SATA port).
3. Connect power to product; when Power works ok if red LED light is working.
4.Connect USB3.0 port of product to USB3.0 port of PC, all connection is ok if LED light is
working (Red & blue LED light are working at the same time, then you can access to data freely.
5. Hard disk will be automatically detected after all connection is ready, then you can access to
data. (Blue LED light is flashing shows that data access in progress.)
NOTICE:
1, Please put product on the desk or a stable surface, and insure it is steady after
connected with hard disk. Then please connect to power; don’t remove hard disk while it
is working, otherwise, data will be lost, even the hard disk will be damaged.
2. If the system can’t automatically detect the device, then you need to format the hard
disk use “Disk Management” or “Disk Utility”.
3. The transfer speed can up to the rate of USB3.0 if your PC also has USB3.0 port while
accessing data.
4. Pls. check whether the device has connected to USB3.0 channel or not, if the transfer
speed can’t up to the rate of USB3.0. And need you to note that there are some
differences in actual transfer speed due to different hard disk.