Digitus DA-70842 User manual

USB 3.0 TO DVI ADAPTER
Manual
DA-70842 Rev. 2
Description
DIGITUS USB 3.0 to DVI Adapter, resolution up to 1920x1080 @60Hz, extend and
mirror mode support.
The DIGITUS USB 3.0 to DVI Adapter extends your workspace with an additional
monitor, TV or projector via the USB interface. You can use two graphic adapters
simultaneously on the PC and add or remove a monitor without rebooting the system.
This adapter supports resolutions up to 1920x1080, video streaming up to 1080p. The
USB 3.0 to DVI adapter impresses with its elegant black housing and without additional
installation of graphics cards. The power supply runs through an USB port, so there’s
no additional external power supply needed.

2
Feature
Compliant with USB3.0 Specification Revision 1.0
Compliant with Universal Serial Bus Device Class Definition for
Video Devices (USB V)
USB upstream port supporting SS/HS data rate (5Gbps/480Mbps)
Video output up to 1920x1080@60Hz in USB 3.0 application
(Video output 800x600 in USB 2.0 application)
Supports USB Plug and Play (PNP)
WHCK/WHQL certified driver support for Windows 7, 8 and 10
Support Windows Aero Effects
Package content
1. USB3.0 Graphic adapter
2. Quick Installation Guide
System Requirement
Intel i3 2.5GHz or Higher
4GB DDR3 SDRAM
Operating System: Windows 7 and above
Installation
1. Connect DA-70842 USB port to computer
2. New USB flash driver will be found
3. Install the driver (.exe file) and reboot the computer.
4. Connect DVI connector to monitor
PS: If there is new OS version released, please go to website
http://www.business.assmann.com/and download new driver.

3
Connection Diagram
①. Monitor
②.1080P TV
③. Notebook
④.PC

4
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post under
the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany