Digitus DN-10050-1 User manual

10/100M NETWORK
USB ADAPTER
Quick Installation Guide
DN-10050-1 Rev. 3

2
1.Product Introduction
DN-10050-1 is an USB 2.0 to Fast Ethernet Adapter that provides computer system with Ethernet link
speed up to 100Mbps. It is backward compatible with USB 1.x. This compact and portable adapter is
ideal as a desktop network adapter or laptop accessory.
2.Features
1. Compliant with the Standard Specification of USB 1.1 and 2.0
2. Integrates 10/100Mbps Fast Ethernet MAC/PHY
3. IEEE 802.3 10BASE-T/100BASE-TX compatible
4. Support full Duplex Operation 10/100Mbps modes
5. Support USB Full and High Speed modes with bus power capacity
6. Supports Suspend mode and Remote Wakeup via Link-up
7. Upstream port: USB type A
8. Downstream port: RJ45
9. Support Windows®7/8/10/11(32/64 bit); MacOS 10.4 or later
3.System Requirements
1. Windows®7/8/10/11 (32/64 bit), MacOS 10.4 or later
2. An USB port
4.Package Contents
1 x USB 2.0 to Fast Ethernet Adapter
1 x User Manual
5.Hardware Installation
1. Plug DN-10050-1 directly into an available USB port on your computer.
2. Connect the network cable into the RJ45 port of DN-10050-1
3. Connect the other end of the network cable into an available Ethernet port on your router, switch,
or any other network device.

3
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the shipping
content. If the Declaration of Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany