Digitus DA-70148-2 User manual

USB 2.0 TO SATA&IDE ADAPTER
MANUAL
DA-70148-2

1. Characteristics
Support SATA spread-spectrum transmitter
Support SATAII Asynchronous Signal Recovery (Hot Plug) feature
Compliance with USB 2.0 (Hi-Speed USB) electrical specification
Compliance with USB Mass Storage Class Bulk-Only Transport Specification
Support 480Mbps High Speed (HS) and 12Mbps Full Speed USB operation
Support ATA/ATAPI-7
Support ATA/ATAPI Ultra DMA Mode
Support ATA/ATAPI PACKET command feature set
Support ATA/ATAPI LBA48 addressing mode
Support Windows 7, Vista, Windows XP, Windows 2000
2. Product introduction
1. SATA Port for 2.5’’/3.5’’ SATA Hard Drive
2. IDE Port for 2.5’’ IDE Hard Drive
3. IDE Port for 3.5’’ IDE Hard Drive
4. USB 2.0 B Female
5. Power socket for 12V input power adapter
6. Power socket for 12V/5V output for IDE Hard Drive
7. Power Light
8. Active Light : It will keep flashing when it is detecting the 2.5’’/3.5’’ SATA Hard Drive or during the
Data transferring .
1
2
3
4 56
7 8

3 USER TIPS for HDD INSTALLATION For 2.5’’/3.5’’ SATA HDD
(1) Have SATA Hard Drive to connect with USB2.0 TO SATA&IDE ADAPTER
(2) Have the external Power Adapter connect with USB2.0 TO SATA & IDE ADAPTER
(3) Have the USB2.0 AM TO BM Cable connect with USB2.0 TO SATA & IDE ADAPTER and your
computer , then power on , your computer system will detect the SATA HDD

For 3.5’’ IDE HDD
(1) Have the 3.5’’ IDE HDD connect with USB2.0 TO SATA & IDE ADAPTER .
(2) Have the power splitter cable connect with USB2.0 TO SATA & IDE ADAPTER and 3.5’’ IDE HDD .
(3) Have the 12v external power Adapter connect with USD2.0 TO SATA & IDE ADAPTER .

(4) Have USB2.0 AM TO BM Cable connect with USB2.0 TO SATA & IDE ADAPTER and your
computer , then power on , your computer system will detect the IDE HDD .
For 2.5’’ IDE HDD
(1) Have 2.5’’ IDE HDD connect with USB2.0 TO SATA & IDE ADAPTER
(2) Have the 12V external Power Adapter connect with USB2.0 TO SATA & IDE ADAPTER

(3) Have USB2.0 AM TO BM CABLE connect with USB2.0 TO SATA & IDE ADAPTER and your
computer , then power on , your computer system will detect the IDE HDD .
NOTES :
Our product USB2.0 TO SATA & IDE ADAPTER can support 2.5’’/3.5’’ SATAT & IDE HDD synchronously ,
please refer to the below application image