Digitus DS-55508 User manual

4K HDBaseT™ HDMI
Extender Set, 150 m
Manual
DS-55508

2
Table of Contents
1. Introduction ............................................................................2
2. Main Features .........................................................................3
3. Package Contents ....................................................................3
4. Specification............................................................................4
5. Operating Controls and Functions............................................6
5.1 Transmitter Panel...................................................................6
5.2 Receiver Panel........................................................................8
5.3 IR Pin Definition .....................................................................9
6. Application Example..............................................................11
1. Introduction
The HDBaseT™ HDMI Extender Set enables uncompressed, high-
resolution signal transmission over large distances using a simple
copper data cable. The maximum transmission distance is 150 m (Full
HD). 4K signals can be extended to up to 120 m. Thanks to PoC, only
one unit needs to be supplied with power by an external power
adapter. RS232 and bi-directional IR transmission are also included as
features. Thanks to an HDMI loop-out to the transmitter unit, a local
monitor can be connected in order to control the output to the
receiver.

3
2. Main Features
•Supports HDBaseT™ 1.0 via CAT5e/6/7/8 cable up to 150 m
•Supports 4K2K/60Hz (4:4:4)
•Maximum transmission distance (UHD 4K2K): 120 m
•Maximum transmission distance (Full HD 1080p): 150 m
•Video bandwidth: 18 Gbps
•HDMI loop-out to the transmitter unit
•PoC (Power over Cable) - Only the unit requires an
external power adapter
•HDCP 2.2 / 1.4
•HDR, HDR10+, Dolby Vision, HLG
•R232 signal transmission
3. Package Contents
•1x Transmitter unit
•1x Receiver unit
•1x IR transmission cable (1.5 m)
•1x IR receiver cable (1.5 m)
•1x Power adapter (DC 24V/1A, 1.45 m)
•2x 3-pin Phoenix connector
•4x Mounting plate
•1x User manual

4
4. Specification
Technical
HDCP Compliance
HDCP 2.2 / HDCP 1.4
Video Bandwidth
18Gbps
Video Resolution
4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All HDMI 3D TV formats
All PC resolutions including 1920 x 1200
Color Space
RGB / YCbCr 4:4:4, YCbCr 4:2:2,
YCbCr 4:2:0
Color Depth
8/10/12-bit (1080P60Hz, 4K30Hz,
4K60Hz, YCbCr 4:2:2/4:2:0)
8-bit (4K60Hz 4:4:4)
HDMI Audio Formats
LPCM 2.0/2.1/5.1/6.1/7.1,
Dolby Digital, Dolby TrueHD,
Dolby Digital Plus (DD+), DTS-ES, DTS
HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats
PCM 2.0
ESD Protection
Human body model
±8kV (Air-gap discharge)
±4kV (Contact discharge)

5
Connections
Transmitter
Inputs: 1x HDMI Type A [19-pin female]
Outputs: 1x HDMI Type A [19-pin female]
1x HDBT OUT [RJ45, 8-pin female]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Receiver
Inputs: 1x HDBT IN [RJ45, 8-pin female]
Outputs: 1x HDMI Type A [19-pin female]
1x AUDIO OUT
[3.5mm Stereo Mini-jack]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
67mm (W) × 91.5mm (D) × 17.5mm (H)
Weight
Transmitter: 160g, Receiver: 155g
Power Supply
Input: AC 100 - 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power
Consumption
9.36 W
Operating
Temperature
32 - 104°F / 0 - 40°C
Storage
Temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20~90% RH (non-condensing)

6
Resolution / Distance
4K2K
394ft / 120M
1080P
492ft / 150M
Resolution /
Cable Length
4K60 -
Feet / Meters
4K30 -
Feet / Meters
1080P60 -
Feet / Meters
HDMI IN / OUT
16ft / 5M
32ft / 10M
50ft / 15M
The use of “Premium High Speed HDMI” cable is highly
recommended.
5. Operating Controls and Functions
5.1 Transmitter Panel
No.
Name
Function description
1
Power LED
Red LED indicates that the transmitter
is powered on
2
SERVICE port
Firmware update port

7
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC
function, it means that either
transmitter or receiver is powered on
by 24V/1A power adapter, the
other one doesn’t need power supply
4
HDBT OUT
RJ45 connector for connecting the
HDBT IN port of receiver
with a CAT 5e/6 cable
5
Connection
Signal Indicator
lamp
•Illuminating: Transmitter and
Receiver are in good connection
status
•Flashing: Transmitter and Receiver
are in poor connection status
•Dark: Transmitter and Receiver are
not connected
6
Data Signal
Indicator lamp
•Illuminating: HDMI signal with HDCP
•Flashing: HDMI signal without HDCP
•
Dark: No HDMI signal
7
HDMI OUT
HDMI loop output for display
8
HDMI IN
HDMI source input
9
IR IN
IR input port for receiving the signal of
IR remote
10
IR OUT
IR output port for control of source
device. This IR output signal is from the
IR IN port of receiver
11
RS-232
3-pin Phoenix connector for RS-232
command transmission.
The RS-232 command will pass-through
from transmitter to receiver or from
receiver to transmitter

8
5.2 Receiver Panel
No.
Name
Function description
1
Power LED
Red LED indicates that the receiver is
powered on
2
SERVICE port
Firmware update port
3
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it
means that either transmitter or receiver is powered
on by 24V/1A power adapter, the other one doesn’t
need power supply
4
HDBT IN
RJ45 connector for connecting the
HDBT OUT port of transmitter with a
CAT 5e/6 cable
5
Connection
Signal Indicator
lamp
•Illuminating: Transmitter and
Receiver are in good connection
status
•Flashing: Transmitter and Receiver
are in poor connection status
•Dark: Transmitter and Receiver are
not connected
6
Data Signal
Indicator
•Illuminating: HDMI signal with HDCP
•Flashing: HDMI signal without HDCP
•
Dark: No HDMI signal

9
7
HDMI OUT
HDMI output for display
8
AUDIO OUT
3.5mm stereo connector for analog
audio output
5.3 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:
IR RECEIVER
IR BLASTER
IR Blaster
IR Blaster
Signal
Power
NC
IR Receiver
IR Signal
Power
Grounding

10
The following is IR system diagram about IR cable use method.
1
Transmitter
6
TV
2
TV remote
7
IR Blaster cable
3
DVD
8
IR Receiver cable
4
CAT 5e/6 cable
9
DVD remote
5
Receiver
Note: When the angle between the IR receiver and the remote
control is ± 45°, the transmission distance is 0-5 meters; when the
angle between the IR receiver and the remote control is ± 90°, the
transmission distance is 0-8 meters.

11
6. Application Example

12
A
Transmitter
4
Controller
B
Receiver
5
UHDTV
1
Power Supply
6
IR Blaster
2
CAT 5e/6 cable
7
IR Receiver
3
DVD or Blu-ray Player
8
2.0 Speaker
Disclaimer
The terms HDMI and HDMI High-Definition Multimedia interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the
HDBaseT Alliance
Hereby ASSMANN Electronic GmbH declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany