Digitus DN-95129 User manual

DIGITUS Long Range PoE
Extender 10/100 Mbit
Quick Installation Guide
DN-95129

2
1. Description
Introducing the PoE Extender DN-95129 - the perfect solution for
extending your network's reach without compromising on performance.
This compact and versatile device is designed to comply with
IEEE802.3af/at/bt standards, ensuring seamless integration with your
existing network infrastructure. With its rugged plastic housing and IP67
protection class, the DN-95129 is built to withstand even the harshest
outdoor environments. Capable of transmitting both data and power on a
single network cable, this PoE extender supports 10/100Mbps data
transmission, ensuring fast and reliable connectivity. Using a single DN-
95129 with a regular PoE switch, the Extender can transmit power over
the internet (PoE) up to a maximum distance of 100 meters with
100Mbps. And with two PoE extender units, the PoE distance can be
extended to 300 meters with 100Mbps or up to 800 meters maximum
with 10Mbps. The DN-95129 features one PD receiving terminal and one
PSE supply terminal, making it easy to install and use. Simply plug and
play - no configuration is required. And with an operating temperature
range of -10°C to 55°C, this device is perfect for use in a wide range of
environments. In summary, the PoE Extender DN-95129 is a reliable and
cost-effective solution for extending your network's reach. Its compliance
with industry standards, rugged design, and ease of use make it an ideal
choice for any outdoor network setup.

3
2. Features
Complies with IEEE802.3af/at/bt Standard
Capable of transmitting both data and power on a single network cable
Support 10/100Mbps data transmission
Single DN-95129 use with a regular PoE Switch, power over
internet(PoE) distance is 100 meters maximum with 100Mpbs
Two DN-95129 use with a regular PoE Switch, power over
internet(PoE) distance is 300 meters with 100Mbps or up to 800
meters maximum with 10Mbps
Plug-and-play, no configuration required
It's ideal for harsh outdoor environment
Plastic housing, protection class IP67
3. Package Contents
1x PoE Extender
1 x QIG
4. Specifications
Standard
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x,
IEEE802.3af, IEEE802.3at, IEEE802.3bt
Port
2*10/100Mbps RJ45 ports
Network Media
(Cable)
10BASE-T: UTP category 3,4,5 cable (≤100m)
100BASE-TX: UTP category 5 cable (≤100m)
Dimensions
(L*W*H)
156.5*29*29MM
PD Port Input
IEEE802.3af/at/bt
PoE Power Output
IEEE802.3af/at/bt
PSE Power On
RJ45
Data Pairs 1/2（+）3/6（-）,
4/5（+）7/8（-）
Temperature
Operating Temperature:-10 °C ~ 55 °C
Storage Temperature：-40 °C ~ 70 °C
Humidity
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Weather Rating
IP67

4
5. Notes on Installation and Use
Precautions: To avoid equipment damage and personal injury, observe the
following precautions:
The nut of the waterproof connector should be tightened completely
with the thread of the connector to fit the hexagonal plane, otherwise it
will easily lead to water ingress and damage to the machine;
Do not place the machine near water or any damp area. Prevent
water or moisture from entering the machine chassis;
Do not place the machine on an unstable case or desk. The machine
might be damaged severely in case of a fall;
Ensure proper ventilation of the equipment room and keep the
ventilation vents of the machine free of obstruction;
Make sure that the operating voltage is the same one labeled on the
machine;
To avoid the danger of electric shock, do not open the chassis without
authorization; If any fault occurs, contact professional maintenance
personnel.
6. Application Schematic
Application diagram of PoE Extender. Pay attention to the direction of
INPUT and OUTPUT.
When a single extender is used, the input port (INPUT) is connected
to a PoE Switch and the output port (OUTPUT) is connected to an IP
terminal device, which can extend 100Mbps data by 100M;
When two extenders are used together, the output port (OUTPUT) of
one extender is connected to a PoE Switch, the input port (INPUT) is
connected to the input port (INPUT) of the other extender, and the
output port (OUTPUT) is connected to an IP terminal device. It can
extend 100Mbps data by 300m and 10Mbps data by 800m.

5
Please see the application schematic for specific connection methods.
This is a Class A product. In home environment, this product may cause
radio interference. In this case, the user may be required to take
appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid, Germany
Data + Power
800m
DN-95129
DN-95129
DN-95129
DN-95129
DN-95129
PoE Switch
PoE Switch
PoE IP Camera
PoE IP Camera
Data + Power
100m
Data + Power
100m
Data + Power
1m
Data + Power
1m