Digitus DS-55505 User manual

HDMI® HDBaseT™
2.0 KVM EXTENDER SET, 100 m
Manual
DS-55505

2
Introduction
With the DIGITUS® HDMI® HDBaseT™ 2.0 KVM Extender Set, you can control your
source device at a distance of up to 100 meters using a single CAT5e/6/7/8 cable
connection with uncompressed 4K-HDMI® video content and access to up to 6
connected USB devices. This extender was specially developed for smooth and easy
setup. HDBaseT™ 2.0 enables installation using a single cable, avoiding the laborious
relocation of multiple cables. A typical application would be a multi-room solution in
which the source device and display can be at a distance of up to 100 m. From the
receiver, you can use up to 6 USB devices that are connected to the transmitter
module, and of course you can enjoy video and audio content. A very easy KVM
functionality when it comes to installation and application. Instead of relocating
multiple cables, use a single RJ45 network cable or the existing network connections
(point-to-point) with the HDMI® HDBaseT™ 2.0 Extender from DIGITUS®.
Package Content
①
.1 x HDMI® HDBaseT™ 2.0
KVM Extender Set
②
.4 x Installation bracket for
wall mounting
③
.2 x Power adapter 12 V / 2 A
④
.1 x USB Connection cable 1.5 m

3
Ports and Interfaces
RX (Receiver)
TX (Sender)
Front:
Back:

4
1. DC 12V: DC 12V In
2. HDBaseT IN: Standard HDBaseT Signal Input Port. Connect HDBaseT Receiver
with a Cat5e/6/7 Cable.
3. HDMI OUT: Connect to an HDMI Equipped TV/monitor
4. USB Type A: Connect to USB peripheral devices such as printer, keyboard,
mouse, U-disk etc.
5. Earphone: Connect to Stereo Audio output Device
6. Microphone: Connect to Microphone Audio input Device
7. HDBaseT OUT: Standard HDBaseT Signal Output Port. Connect HDBaseT Receiver
with a Cat5e/6/7 Cable.
8. HDMI IN: Connect to Input Sources via HDMI Male Input Port
9. USB Type B: Connect from PC or Laptop for data transmit to or control from the
Receiver’s USB-A slots.
10. DC 12V: DC 12V In
11. USB Type A: Connect to USB peripheral devices such as printer, keyboard,
mouse, U-disk etc.
12. Power: Power LED Indicator
Link:
No Connection: Keep Lighting off
Get Connection: Keep Lighting on
HDCP:
Signal with HDCP: Keep Lighting on
Signal with No HDCP: Flash Quickly
Features
•Transmit high-resolution multimedia content without a loss of quality and
uncompressed over distances of up to 100 m
•Saves unnecessary cable relocation and pools multimedia signals along with
many other signals in a single network cable
•Forwarding without loss of quality through transmission of uncompressed data
•Supports HDBaseT™ 2.0 via CAT5e/6/7/8 cable up to 100 m
•Supports transmission of video, audio and USB signals via network cable
•Supports Full 3D, 1080p, 4K@60Hz (YUV 4:2:0)
•Supports USB 2.0 features (HighSpeed) for up to 6 USB devices
•Supports CEC (Consumer Electronics Control)
•Supports uncompressed audio transmission (LPCM7.1)
•Supports compressed audio transmission (DTS, Dolby Digital incl. DTS-HD Master
Audio™ and Dolby TrueHD)

5
Connection Diagram
①
.Adapter
⑥
.PC or DVD or Laptop
②
.TV
⑦
.Adapter
③
.Keyboard
④
.Audio
⑤
.Mic
⑧
.Mouse
⑨
.Camera

6
Specification
Note: Specifications are subject to change without notice.
Inputs
1 x HDMI®, 1 x USB B
Outputs
1 x HDMI®, 6 x USB A
HDMI® bandwidth
10.2 Gbps
HDCP version
2.2
HDMI version
1.4
Color depth
36-bit total (12-bit per channel)
Uses HDBaseT™ 2.0 technology (VS2310)
Support
Supports Full 3D, 1080p, 4K@30/60Hz
Supports sub-sampling: 4:2:0
Supports HDBaseT™ 2.0 via
CAT5e/6/7/8 cable up to 100 m
Supports USB 2.0 features (Hi-Speed)
Supports CEC (Consumer Electronics Control)
Supports uncompressed audio transmission
(LPCM7.1)
Supports compressed audio transmission
(DTS, Dolby Digital incl. DTS-HD Master
Audio™ and Dolby TrueHD)
Supported resolutions (interlaced):
480i, 576i, 1080i
Supported resolutions (progressive): 480p,
576p, 720p, 1080p, 4K (4096x2160@24Hz,
3840x2160@60/30Hz)
Operating temperature
0 °C to +40 °C
Operating humidity
5% to 90% RH (non-condensing)
Power consumption transmitter
3 W
Power consumption receiver
7 W
Power adapter
Input: 100 - 240 V AC / 0.65 A – Output: 12 V / 2 A
Cable length power adapter
1.2 m
Dimensions transmitter
W 10.3 x D 8.9 x H 2.5 cm
Dimensions receiver
W 11 x D 8 x H 2.8 cm
Weight
235 g (transmitter), 260 g (receiver)
Housing
Metal

7
This is a Class A product. In home environment, this product may cause radio interference.
In this case, the user may be required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post under
the below mentioned
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany