Digitus DN-16023 User manual

I
IP P N Ne et tw wo or rk k C Ca am me er ra a
Pan/Tilt Remote Control &
With Audio & Night Vision
User’s Guide

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 2/57 Rev. PV1.0
--------------------------------------------TABLE OF CONTENTS--------------------------------------------
1. OVERVIEW.............................................................................................................................. 3
1.1 PRODUCT DESCRIPTION ............................................................................................................. 3
1.2 PRODUCT FEATURE .................................................................................................................... 3
1.3 PRODUCT SPECIFICATION ........................................................................................................... 3
1.4 PRODUCT ACCESSORIES INCLUDE............................................................................................... 4
1.5 SYSTEM REQUIREMENT .............................................................................................................. 5
1.6 DN-16023 EXTERIOR FUNCTION INTRODUCE............................................................................... 5
1.7 TV_OUT FUNCTION INTRODUCE................................................................................................. 6
1.8 PRODUCT SET-UP..................................................................................................................... 7
2. UTILITIES AND TOOLS.............................................................................................................. 8
2.1 CAM_EZ SEARCH ..................................................................................................................... 8
2.2 USE IP-CAM AND TEST THE IMAGE FUNCTION FOR THE FIRST TIME................................................ 8
2.3 HOW TO SET UP IP CAM ...................................................................................................... 10
2.4 SETTING THE WAY TO OBTAIN THE IP ADDRESS OF IP-CAM......................................................... 10
2.5 IP-CAM NETWORK FRAMEWORK INSTALLATION......................................................................... 16
2.6 INSTALLATION FOR IP SHARE .................................................................................................... 23
2.7 INTERNET IP SHARING &AUDIO SETTING ................................................................................... 26
3. GETTING STARTED................................................................................................................ 27
3.1 SYSTEM LOGIN......................................................................................................................... 27
3.2 LIVEVIEW................................................................................................................................. 28
3.3 TAKE A SHOT............................................................................................................................ 30
4.ADVANCED FUNCTION WITH LIVEVIEW................................................................................... 31
4.1 IMAGE ADJUSTMENT ................................................................................................................. 32
4.2 AVI RECORD SETUP................................................................................................................. 32
4.3 ZOOM IN DISPLAY ..................................................................................................................... 33
4.4 MOTION DETECTION SETUP ...................................................................................................... 33
5.ADVANCED APPLICATION ...................................................................................................... 34
5.1 IMAGE SETUP........................................................................................................................... 34
5.2 CAPTURE VIEW ........................................................................................................................ 35
5.3 EVENT TRIGGER....................................................................................................................... 36
5.4 NETWORK SETUP ..................................................................................................................... 37
5.5 SERVER SETUP........................................................................................................................ 39
5.6 ADMINISTRATION SETUP ........................................................................................................... 41
5.7 SOFTWARE UPDATE .............................................................................................................. 42
APPENDIX ................................................................................................................................ 45
APPENDIX A. USING A PPPOEDIALUP CONNECTION AND DDNS WITH THE DN-16023 EZ IPCAM (USING

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 3/57 Rev. PV1.0
A HUB ) 45
APPENDIX B. FAQ：......................................................................................................................... 53
1. OVERVIEW
1.1 PRODUCT DESCRIPTION
DN-16023 is an easy and effective IP Camera product for remote monitoring
/administrating. The setup for this device is simply. Built-in Web server allows you to use
web browser (e.g., Microsoft IE) through LAN or broadband network in any time and any
place. Type the IP address of the IP-CAM camera on the network address line to carry
out the works of remote image monitoring and administration. Handle the real-time image
of the monitored location.
In addition, the camera supports many network protocols such as PPPoE, DHCP,
STATIC IP, DDNS, SMTP, FTP and NTP with high-performance SDRAM control and
memory card access. The built-in TV Out decoding/coding device can display the most
popular TV screen (supporting NTSC and PAL) in families with combining fast Motion
Detection and SD Expansion Card in hardware. Moreover, DN-16023 is equipped with IR
LED lightening, so it has the function of night vision. Besides, this device also has the
function of recording and real-time photographing. To a family, such remote monitoring
can reach professional security and have great fun.
1.2 PRODUCT FEATURE
Use standard Web Browser ID to monitor, record, and shot remotely
Maximum 640x480 Full screen
Allow to view images from multi-camera
Allow on-line image viewing remotely for multi-user simultaneously
Motion Detect, monitor and store triggered photographs at any time for the whole day
Remote real-time recoding to the device and trigger to sending images to FTP & E-Mail &
SD Card & PC
Support virtual IP and port switch in IP DSALM
Support several communication protocols, TCP/IP, DHCP, SMTP, FTP, PPPoE, DDNS,
Use functional authority setting, name registration and password protection
Support the dynamic IP network function of DHCP
Support ADSL network of PPPoE user
Standard RJ-45 network connector, support 10/100 BaseT network transmission
1.3 PRODUCT SPECIFICATION
Image Size: 160x120、320x240、640x480 adjustable
Image Quality: Fine、Normal、Basic adjustable
Video Frequency: 50 Hz for PAL、60 Hz for NTSC
Image Compression Format : M-JPEG
Focal Distance Range : From 30mm to infinity adjustable

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 4/57 Rev. PV1.0
Digital Zoom : 4X
Video Recording : Video Frame rate setting : auto; 1, 3, 5, 10, fps
Motion Detect Trigger Function, image sent to FTP & E-Mail & SD Card & PC
Support TCP/IP、SMTP、FTP、PPPoE、DHCP Protocol
Network DHCP or manual setting network IP, and support ADSL network of PPPoE
user
Build-in web server and the functions of Active-X and Java
Remote single picture captured with JPG file format, remote continuous screen
recorded with AVI format
Microphone : High touch 10φ-40db±3
TV OUT Video Output: support 50 Hz for PAL、60 Hz for NTSC
Night vision lightening illumination: Auto and Manual selection, IR LED x 6/ 5φ/850λ
Standard RJ-45 network connector, support 10/100 Base T network transmission
5V/ 1A exterior switching power adaptor
Power Consumption : 520mA(max)2.0W(max)
Operating environment : 5˚C~40˚C
Storage temperatures : -0˚C~55˚C
Humidity : 5%~85% non-condensing
1.4 PRODUCT ACCESSORIES INCLUDE
1. DN-16023 IP-Camera
2. Power adaptor, 5V/ 1A Switching Power adaptor
3. Ethernet Cable (red), used to connect to the network card of PC for testing and
configuring the product

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 5/57 Rev. PV1.0
4. Ethernet Cable (blue), used to connect to Hub, ADSL modem, IP Share
5. TV OUT A/V Cable
6. Setup CD
7. This User’s Guide
8. Accessory for hanging and fastening
1.5 SYSTEM REQUIREMENT
PC
Processor: Intel Pentium 4 ® 1.4GHz or above is recommended
RAM: 256MB or above
Operation System: Windows 2000®or Windows XP®
Hard Disk: Minimum 10MB or above
Network
Network Card: 10/100 base T
Network Setup: Accessing Internet normally
Web Browser: Microsoft Internet Explorer 6.0 or above
Connect Network Equipment: ADSL modem, IP Share or Hub
Active-X for activating control items and plug-in
1.6 DN-16023 EXTERIOR FUNCTION INTRODUCE
Micro
p
hone Status Light
IR LEDX6 Focus Adjustable

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 6/57 Rev. PV1.0
Usage of Reset Switch:
While the system is active normally, press and hold Reset Switch for a short time (about 3 to 5
seconds) till Status LED lights up. The system will restart the device and recover to the factory
default settings.
SD Card Usage Diagram:
1.7 TV_OUT FUNCTION INTRODUCE
Reset Switch
DC JACK RJ-45 JACK
TV_OUT JACK
SD Card Slot
Reset Switch
TV_OUT
Cable
Adapter

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 7/57 Rev. PV1.0
1. First, insert the TV_OUT cable to the place as shown in Figure 1.
2. Next, plug in power adapter as shown in Figure 2. Press and hold Reset switch for
three seconds. Then, release it. The IP-CAM will access into TV_OUT mode.
3.TV_OUT operation description:
a. Hold to change mode: For the default setting for TV_OUT is NTSC system, if you
want to use PAL system, please press and hold Reset switch about
three seconds to switch between NTSC and PAL systems.
b. Push to exit : Press Reset to access into TV screen and adjustable
50Hz,60Hz,Outdoor
1.8 PRODUCT SET-UP
Anchor
Frame
Screw (P head
M3.5X25)

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 8/57 Rev. PV1.0
2. UTILITIES AND TOOLS
2.1 CAM_EZ SEARCH
CAM_EZ Search is an IP search engine offered by this product. It can search IP CAM
connected in LAN. Through sending the inquiry of broadcasting packets, after IP CAM
responds the question, the window will display a list of all IP CAMs in the network. And it
allows you to modify the network settings of specified IP CAM, such as IP address or IP
CAM naming.
CAM_EZ Search Screen
Figure1
2.2 USE IP-CAM AND TEST THE IMAGE FUNCTION FOR THE FIRST TIME
 The following connection is suitable for IP-CAM test/fixed IP address change/program
code update (strongly recommended).
The operation steps are listed below:
A. Installing the Product for the first time:
You computer must be equipped with network card and RT-45 network
connector.
Connect the RJ-45 terminator on the rear of IP-CAM to the red test network
cable. One end is connected to the network card of computer; the other end
is connected to the rear side of the IP-CAM.
Connect the power adaptor to the power port (on the rear) of IP-CAM. Now,
the status LED on the top of IP-CAM will light up.
Choose the
way to get IP
IP address
Communication Port
Audio UDP
port
Default Gateway
Subnet Mask
MAC address
Renew List
IP CAM List
IP CAM Name
Version of
CAM_EZ
Search
Version of IP CAM
Display the way
to
g
et IP
Renew
executed to
obtain an IP
Key in PPPoE

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 9/57 Rev. PV1.0
B. Check if the IP addresses for PC network and CAM_EZ Search are on the
same network section:
Usually, static IP address will be used to access into Internet, so the IP
address will vary. When you want to change IP address, please write
down the original IP address on your computer first. Then you have to
modify the IP address of your computer for testing if the IP-CAM can be
operated normally or not. After finishing the test, IP address for your
computer should be recovered to original settings.
In general, the IP address for your computer in LAN will be set with
“Auto Obtain IP address”. To test if the IP-CAM is normal or not, the IP
address of your computer must be changed temporarily. After finishing
the test, it can be recovered to original settings.
C. Next, choose Control Panel->Network Connections->choose the activated
area
Network Connections---> right click your mouse --->select Properties(P)--->
Select Internet Protocol (TCP/IP)---> Select Properties(R) , then you can
check the current IP address status for the computer. The way to modify IP
address is:
D. Open and execute CAM_EZ Search (as shown in Figure 2). The system will
scan the IP-CAM that you just installed automatically. Then, you will find
255IP CAM in the column of Camera Lists. Click 255IP CAM with left mouse
button. You can see the default settings for IP-CAM.
IPAddress(I):192.168.9.5
Subnet Mask (U):255.255.255.0
Default Gateway(D):192.168.9.254

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 10/57 Rev. PV1.0
Figure 2
2.3 HOW TO SET UP IP CAM
Before you set up IP CAM, you have to know the network environment and if the IP
address is fixed or float that provided by your ISP. If you do not know, please contact with
your ISP. Section 2.5 will list the common network structure (1 ~ 7 types). Users can refer
to the structure to find out what type is suitable for his/her computer and finish the setting
up according to the instructions. To set up IP-CAM and IP address, the common way that
people use is to change the obtaining of IP address of IP-CAM. Detailed information is
listed as 2.4-1 ~ 2.4.3.
2.4 SETTING THE WAY TO OBTAIN THE IP ADDRESS OF IP-CAM
2.4-1 STATIC - IPAddress Setting
You computer must be equipped with network card and RT-45 network
connector.
Connect the RJ-45 terminator on the rear of IP-CAM to the red test network
cable. One end is connected to the network card of computer; the other end
is connected to the rear side of the IP-CAM.
Connect the power adaptor to the power port (on the rear) of IP-CAM. Now,
the status LED on the top of IP-CAM will light up.
Step 1. Click Update. You can see 255DN-16023.
Step 2. Click 255DN-16023. You can see
Name :DN-16023
IP : 192.168.9.1
SubMask ：255.255.255.0
GateWay ：192.168.9.254
HTTP Port：Http communication port. The
default setting is 80.
UDP Port : UDPport, Per-seting is 1500
Step 3. Make sure the IP setting is STATIC.
Step 4. Double click on 255DN-16023 to open the
browser. Type ID/Password to access into network
monitoring screen (for detailed information, please
refer to 3.1). If you can see the image screen, it

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 11/57 Rev. PV1.0
Open and execute CAM_EZ Search (as shown in Figure 3). The system will
scan the IP-CAM that you just installed automatically. Then, you will find
255IP CAM in the column of Camera Lists. Click 255DN-16023 with left
mouse button. You can see the default settings for IP-CAM.
Figure 3
Fill in Fixed IP Address as below. (If you do not know your fixed IP address,
please contact with your ISP. Below is an example of Fixed IP Address
modification.)
Step 4. Type Fixed IP.
Name :DN-16023
IP : 211.78.174.94
SubMask ：255.255.255.248
GateWay ：211.78.174.89
HTTP Port：Http communication port. The
default setting is 80.
(If you have multiple IP-CAMs installed in the
same network, you have to divide them
with different Port numbers, e.g, 1025、
1026、1039…..)
UDP Port : UDP Port，Pre-setting is 1500
Step 5. Choose STATIC.
Step 6. After finishing the settings, click Submit. The
network settings for DN-16023 IP-CAM will
be renewed.
Step 1. Click Update. You can see 255DN-16023.
Step 2. Click 255DN-16023. You can see
Name :DN-16023
IP : 192.168.9.1
SubMask ：255.255.255.0
GateWay ：192.168.9.254
HTTP Port：Http communication port. The
default setting is 80.
(If you have multiple IP-CAMs installed in
the same network, you have to divide them with
different Port numbers, e.g, 1025、1026、1039….)
UDP Port : UDP Port，Pre-setting is 1500
Step 3. Make sure the IP setting is STATIC.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 12/57 Rev. PV1.0
Example:
1. Set up the IP CAM with fixed IP address.
2. Turn on your computer and open IE browser. Type 211.78.174.94:( 1025、
1026、1039….) in the Address line. Now you can access into the monitoring
screen of network.
2.4-2 DHCP - IPAddress Setting:
Use RJ-45 Ethernet cable (red) to connect ADSL host and switching hub.
Then use RJ-45 Ethernet cable (blue) to connect PC and IP CAM (as shown
below).
Connect the power adaptor to the power port (on the rear) of IP-CAM. Now,
the status LED on the top of IP-CAM will light up.
Set up the connection way inside the PC network: Please go to
Control Panel ---> Network Connections ---> Choose Activated LAN
connection ---> right click your mouse ---> Select Properties(P)---> Select
Internet Protocol (TCP/IP)---> Select Properties(R)
--->Click Obtain an IP address automatically(O), Obtain DNS server address
automatically(B).

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 13/57 Rev. PV1.0
Open and execute CAM_EZ Search (as shown in Figure 3). Press Update
to scan the IP-CAM that you just installed automatically. Then, you will find
255DN-16023 in the column of Camera Lists. Click 255DN-16023 with left
mouse button. You can see the default settings for IP-CAM.
Figure 5
Obtain an IP address automatically (O)
Obtain DNS server address
automatically (B)
Step 1. Click Update. You can see 255DN-16023.
Step 2. Click 255DN-16023. You can see
Name :DN-16023
IP : 192.168.9.1
SubMask ：255.255.255.0
GateWay ：192.168.9.254
HTTP Port：Http communication port. The
default setting is 80.
Step 3. Choose DHCP.
Step 4. After finishing the settings, click Submit. The
network settings for DN-16023 IP-CAM will be
renewed. (That is, you can obtain a virtual IP
address)
Step 5. Click Update. You can see 255DN-16023.
Step 6. Click 255DN-16023. You can see the change
of IP-CAM:
Name :DN-16023
IP : 10.1.10.82
SubMask ：255.255.0.0
GateWay ：10.1.10.252
HTTP Port：Http communication port. The
default setting is 80.
Step 7. The IP setting is DHCP.
Step 8. Double click 255DN-16023 to open IE
browser to access into network monitoring
screen.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 14/57 Rev. PV1.0
Example:
1. Now, IP-CAM is set up with the IP address in LAN.
2. Or, use CAM_EZ Search to access into monitoring screen of network
according to the instructions in Figure 5.
3. Or, turn on your PC and open IE Browse. Type 10.1.10.82 in Address lint
to access into monitoring screen of network.
2.4-3 PPPoE - IPAddress Setting
Access into monitoring screen of network by following the way stated in 2.2.
Click Network and open Network menu. Please choose PPPoE and key in
the Account and Password. (the following example uses ADSL account from
AT&T), press Submit to finish key in and then, please reboot and re-enter.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 15/57 Rev. PV1.0
Open CAM_EZ Search and click Update. Wait for 60 seconds (it varies
according to the connection quality). Then the system will search M6820
IP-CAM automatically. 1. Click the searched IP-CAM. 2. Check the IP
address and Gateway. Floating IP address, SubMask and Gateway will be
shown in dimmed color. It means that IP CAM IP-CAM in LAN has been
searched successfully with PPPoE.
3. You can also directly use CAM_EZ Search and key in PPPoE Account &
Password.
Select PPPoE. Click Submit to send out. The IP CAM IP-CAM network
settings will be renewed.
Now you can click the searched IP-CAM to open IE Browser for accessing
into IP-CAM web configurator automatically.
1.
2.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 16/57 Rev. PV1.0
2.5 IP-CAM NETWORK FRAMEWORK INSTALLATION
一. IP-CAM Network Framework Installation 1
Way to access Internet Use Permanent ADSL or Cable Modem
Physical IP Address Owns several physical IP addresses
IP Share or LAN Hub General model is OK.
Network Setup for IP -CAM LAN Enable / Manually
Suitable Objects Users with several physical fixed IP
addresses and several IP-CAMs installed
1. Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable.
One end is connected to the network card of computer; the other end is connected
to the rear side of the IP-CAM.
2. Refer to 2.4-1 STATIC – IP Address Settings to type the IP address properly.
3. Set a physical IP address for each IP-CAM.
4. Set up the IP-CAM with fixed IP address.
5. For viewing images in IP-CAM from remote computer: Open IP browser and type
in the physical IP address of the IP-CAM, e.g., http://211.78.174.03.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 17/57 Rev. PV1.0
二. IP-CAM Network Framework Installation 2
Way to access Internet Use Permanent ADSL or Cable Modem
Physical IP Address Owns more than one IP address
IP Share or LAN Hub Must be equipped with DHCP function
Network Setup for IP -CAM LAN Enable / Manually
Web Server Port Number, need to be
adjusted
Suitable Objects Users with one physical fixed IP addresses,
IP Share and several IP-CAMs installed
1. Set a real physical IP address (e.g., 211.78.174.01) for the public IP of IP Share.
Then, set another private IP address and activate the DHCP server function of IP
Share.
2. In the IP configuration for each IP-CAM, please assign different virtual IP address
internally and respectively. In the Http Port setting, please specify different port
parameters. (Please refer to 2.4-1 STATIC - IP Address Settings to type the IP
address properly.)
3. For the port transformation in IP Share, please refer to IP and port settings of camera
to configure accordingly.
4. For viewing images in IP-CAM from remote computer: Open IP browser and type in
the physical IP address of the IP Share and the port number of IP-CAM, e.g., http://
211.78.174.01:1025.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 18/57 Rev. PV1.0
三. IP-CAM Network Framework Installation 3
Way to access Internet Use dial-up ADSL or Cable Modem
Physical IP Address Owns one float IP address (dispatched by
ISP dynamically)
IP Share or LAN Hub Must be equipped with DHCP and NAT
functions
Network Setup for IP -CAM LAN Enable / Manually
Web Server Port Number, need to be
adjusted
Suitable Objects Users with dial-up
A
DSL, one float IP address
and several IP-CAMs installed
1. Activate PPPoE function of IP share. Then, set another private IP address and
activate the DHCP server function of IP Share. When the dial-up of ADSL is
successful, you will get an float IP address from your ISP.
2. In the IP configuration for each IP-CAM, please assign different virtual IP address
internally and respectively. In the Http Port setting, please specify different port
parameters. (Please refer to 2.4-1 STATIC - IP Address Settings to type the IP
address properly.)
3. For the port transformation in IP Share, please refer to IP and port settings of camera
to configure accordingly.
4. For viewing images in IP-CAM from remote computer: Open IP browser and type in
the float IP address of ADSL and the port number of IP-CAM, e.g., http://
211.78.174.01:1025.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 19/57 Rev. PV1.0
四. IP-CAM Network Framework Installation 4
Way to access Internet Use Permanent ADSL or Cable Modem
Physical IP Address Owns one physical IP address
IP Share or LAN Hub Not necessary
Network Setup for IP -CAM LAN Enable / Manually
Web Server Port Number, no need to be
adjusted
Suitable Objects Users with permanent ADSL, one fixed
physical IP address and one IP-CAM installed
1. Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable.
One end is connected to the network card of computer; the other end is connected
to the rear side of the IP-CAM.
2. Refer to 2.4-1 STATIC – IP Address Settings to typing the IP address properly.
3. Set up the IP-CAM with fixed IP address.
4. For viewing images in IP-CAM from remote computer: Open IP browser and type
in the physical IP address of the IP-CAM, e.g., http://211.78.174.94.

` IP CAM User’s Guide
P Pa an n/ /T Ti il lt t I IP P S Su ur rv ve ei il ll la an nc ce e C Ca am me er ra a
IP CAM USER’S GUIDE PAGE 20/57 Rev. PV1.0
五. IP-CAM Network Framework Installation 5
Way to access Internet Use dial-up ADSL or Cable Modem
Physical IP Address Owns one float IP address (dispatched by
ISP dynamically)
IP Share or LAN Hub Not necessary
Network Setup for IP -CAM PPPoE function should be set, LAN Enable
Web Server Port Number, no need to be
adjusted
Suitable Objects Users with dial-up ADSL, and one IP-CAM
installed
1. Please acquire the necessary information of ADSL dial-up from your ISP.
ISP relational information: ADSL dial-up account name and password
2. Connect the RJ-45 terminator on the rear of IP-CAM to the red test network cable.
One end is connected to the network card of computer; the other end is connected to
the rear side of the IP-CAM.
3. Refer to 2.4-3 PPPoE - IP Address Settings for typing account name and
password.
4. Please type the Mail server setup information of IP-CAM.
5. Set up the IP-CAM to Dial up ADSL Modem.
6. When the dial-up is successful, IP-CAM will send a notification e-mail of float IP
Address to the users.
7. Open IP browser and type in the physical IP address (such float IP is dispatched by
ISP) of the IP-CAM, e.g., http://211.78.174.94.