Digitus DC-71101 User manual

LCD CONSOLE
DC-71101/DC-72101
USER MANUAL
DC-71101
Package Inside
LCD Console x1
USERManual x1
PowerCord x1
Rack-Mount Brackets x 2
Screws (for Brackets) x 12
Key x2
Features
‧ The keyboard, mouse and the 15 inch LCD are built into the LCD display.
‧ Support of the resolution of 1024x768 pixels at, 75 Hz.
‧ Enables the installation of a hanging frame in a 19 inch casing system with a space
requirement of 1 HE.
‧ No additional software necessary.
Specifications
Function DC-71101
LEDs Power 1
Console Port
Keyboard 1x6 pin mini-DIN Female (PS/2)
Mouse 1x6 pin mini-DIN Female (PS/2)
Monitor 1x HD-15 Female (Std. VGA/SVGA)
Audio 1x 3.5 Stereo Plug
VGA Resolution 1024x768 pixel at 75Hz
Power AC 100~240V, 50~60Hz
Housing Metal
Weight 12.1Kg
Dimensions (LxWxH) 600x447x48 mm
Keyboard and Mouse Specifications
Keyboard Standard 104 keys
Mouse Touch pad module
LCD Monitor Specifications
Size 15 inch
Screen Type TFT
Contrast 500:1
Brightness 250 cd/m2
View Angle 130°
Resolution 1024x768 pixel at 75Hz
Response Time 12 ms
Display Color 16.2 M
-1-

LCD Monitor Operation
Keypad Define
Power key: Use this key to turn on or off the LCD monitor.
Menu key: Use this key to open the OSD menu or to return to a previous menu or to exit the
OSD menu.
Up key: Use this key to highlight an item in the menu, to move a highlighted function up, or to
increase the numeric value (parameter) in a certain menu.
Down key: Use this key to highlight an item in the menu, move a highlighted function down,
or decrease the numeric value (parameter) in a certain menu.
Auto key: Use this key to automatically adjust the image position and phase, and return to the
previous menu or to exit a highlight item.
If the screen is not in a full screen graphic mode (such as in a DOS) or is connected with an
allocator, the position of the appeared image may be adjusted automatically and then deviated.
By then, it is necessary to enter into the OSD menu to manually adjust the level or vertical
position and phase.
OSD Control Function List
1. Color: Contrast
Brighthess
Color Adjust
Color Temp.: 9300, 6500, 5800, 5RGB, USER
Exit
2. Image Setting:
Clock
Phase
Gamma
Sharpness
Exit
3. Position:
H.Position
V.Position
Exit
4. OSD Menu:
OSD H.Pos
OSD V.Pos
OSD Timer
Exit
5. Language:
English, Français, Deutsch, Español, 繁體中文, 简体中文, 日本語
6. Misc.: Signal Source
Reset
Factory Mode
Exit
7. Exit
Note: Press Up key or Down key is to adjust the volume, when it is without OSD menu.
-2-
DC-72101
Package Inside
LCD Console x1
USERManual x1
PowerCord x1
Rack-Mount Brackets x 2
Screws (for Brackets) x 12
Key x2
Features
‧ The keyboard, mouse and the 17 inch LCD are built into the LCD display.
‧ Supported by 1280x1024 pixels at 75 Hz.
‧ Enables the installation of a hanging frame in a 19 inch casing system with a space
requirement of 1 HE.
‧ No additional software necessary.
Specifications
Function DC-72101
LEDs Power 1
Console Port
Keyboard 1x6 pin mini-DIN Female (PS/2)
Mouse 1x6 pin mini-DIN Female (PS/2)
Monitor 1x HD-15 Female (Std. VGA/SVGA)
Audio 1x 3.5 Stereo Plug
VGA Resolution 1280x1024 pixel at 75Hz
Power AC 100~240V, 50~60Hz
Housing Metal
Weight 13.2Kg
Dimensions (LxWxH) 600x450x48 mm
Keyboard and Mouse Specifications
Keyboard Standard 104 keys
Mouse Touch pad module
LCD Monitor Specifications
Size 17 inch
Screen Type TFT
Contrast 500:1
Brightness 300 cd/m2
View Angle 140°
Resolution 1280x1024 pixel at 75Hz
Response Time 8 ms
Display Color 16.2 M
-3-

LCD Monitor Operation
Keypad Define
Power key: Use this key to turn on or off the LCD monitor.
Menu key: Use this key to open the OSD menu and enter to next menu or to highlight a
confirmed function.
Up key: Use this key to highlight an item in the menu, to move a highlighted function up, or to
increase the numeric value (parameter) in a certain menu.
Down key: Use this key to highlight an item in the menu, to move a highlighted function down,
or to decrease the numeric value (parameter) in a certain menu.
Auto key: Use this key to automatically adjust the image position and phase, and return to the
previous menu or to exit a highlight item.
If the screen is not in a full screen graphic mode (such as in a DOS) or is connected with an
allocator, the position of the appeared image may be adjusted automatically and then deviated.
By then, it is necessary to enter into the OSD menu to manually adjust the level or vertical
position and phase.
OSD Control Function List
1. Color: Contrast
Brighthess
Color Adjust
Color Temp.: 9300, 6500, 5800, 5RGB, USER
Exit
2. Image Setting:
Clock
Phase
Gamma
Sharpness
Exit
3. Position:
H.Position
V.Position
Exit
4. OSD Menu:
OSD H.Pos
OSD V.Pos
OSD Timer
Exit
5. Language:
English, Français, Deutsch, Español, 繁體中文, 简体中文, 日本語
6. Misc.: Signal Source
Reset
Factory Mode
Exit
7. Exit
Note: Press Up key or Down key is to adjust volume, when it is without OSD menu.
-4-
Trademarks:
All the companies, brand names, and product names referred to this manual are the trademarks
or registered trademarks belonging to their respective companies.
-5-