Digitus DS-72102GE User manual

LCD CONSOLE
User Manual
DS-72102GE / DS-72102US

Package Inside
LCD Console x 1
USER Manual x 1
Power Cord x 1
Rack-Mount Brackets x 2
Screws (for Brackets) x 12
Key x 2
Features
‧ The keyboard, mouse and 19” LCD monitor were built-in on the LCD console.
‧ Support resolution of 1280×1024, 75Hz.
‧ Comply with the height of the 1U chassis specification and installable with a
hanging stand into a 19” chassis system.
‧ Requires no additional software or hardware.
Specifications
Function KC-1901
LEDs Power 1
Console Port
Keyboard 1x6 pin mini-DIN Female (PS/2)
Mouse 1x6 pin mini-DIN Female (PS/2)
Monitor 1x HD-15 Female (Std. VGA/SVGA)
VGA Resolution 1280x1024@75Hz
Power AC 100~240V, 50~60Hz
Housing Metal
Weight 13.2Kg
Dimensions (LxWxH) 600x450x48 mm
Keyboard and Mouse Specifications
Keyboard Standard 104 keys
Mouse Touch pad module
LCD Monitor Specifications
Size 19 inch
Screen Type TFT
Contrast 700:1
Brightness 300 cd/m
2
View Angle 160°
Resolution 1280x1024@75Hz
Response Time 6 ms
Display Color 16.2 M

LCD Monitor Operation
Keypad Define
Power key: Use this key to turn on or off the LCD monitor.
Menu key: Use this key to open the OSD menu or to return to a previous menu
or to exit the OSD menu.
Up key: Use this key to highlight an item in the menu, to move a highlighted
function up, or to increase the numeric value (parameter) in a certain
menu.
Down key: Use this key to highlight an item in the menu, move a highlighted
function down, or decrease the numeric value (parameter) in a
certain menu.
Auto key: Use this key to automatically adjust the image position and phase,
and return to the previous menu or to exit a highlight item.
If the screen is not in a full screen graphic mode (such as in a DOS) or is
connected with an allocator, the position of the appeared image may be adjusted
automatically and then deviated. By then, it is necessary to enter into the OSD
menu to manually adjust the level or vertical position and phase.

OSD Control Function List
1. Color:
Contrast
Brightness
Color Adjust
Color Temp.: 9300, 6500, 5800, 5RGB, USER
Exit
2. Image Setting:
Clock
Phase
Gamma
Sharpness
Exit
3. Position:
H.Position
V.Position
Exit
4. OSD Menu:
OSD H.Pos
OSD V.Pos
OSD Timer
Exit
5. Language:
English,
Français,
Deutsch,
Español,
繁體中文,
简体中文,
日本語
6. Misc.:
Signal Source
Reset
Factory Mode
Exit
7. Exit
Note: Press Up key or Down key is to adjust the volume, when it is
without OSD menu.