Digitus DA-90452 User manual

COLLABORATION TROLLEY /
TV PRESENTATION CART
Mounting instructions
DA-90452

2
Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, contact your place of purchase for a replacement.
Left leg
A (x1)
Right leg
B (x1)
Cross bracket
C (x1)
Caster
D (x4)
Lower column
E (x2)
Upper column
F (x2)
Handle
G (x2)
Left TV bracket
J (x1)
Mounting plate assembly
H (x1)
AV equipment shelf
I (x1)
Right TV bracket
K (x1)
Camera shelf
L (x1)
Connecting bracket
M (x1)
End cap
N (x2)
Top cover
O (x2)
Cable cover
P (x16)
Package P
Washer
P-A (x8)
M8x80
P-B (x8)
M8x20
P-C (x16)
M5x8
P-D (x2)
M8x12
P-E (x2)
Spacer
P-F (x1)
M6 wrench
P-G (x1)
M12 wrench
P-H (x1)
5mm Allen key
P-I (x1)
6mm Allen Key
P-J (x1)

3
Package M
M5x14 (x4)
M-A
M6x14 (x4)
M-B
M6x30 (x4)
M-C
M8x30 (x4)
M-D
M8x50 (x4)
M-E
Washer (x4)
M-F
Small spacer (x8)
M-G
Big spacer (x8)
M-H
1. Assamble the Base

4
2. Assemble the Columns

5
3. Attache the Mounting Plate to the Column
Before attaching, ensure the ends of the mounting
plates with protruding parts face upwards.
Loosen the screws to leave a gap over 4 mm

6
4. Assemble the AV Equipment Shelf
Loosen the screws to leave a gap over 4 mm
5. Assemble the Top Covers and End Caps

7
6. Attach TV Bracket to Flat Back Screen/Irregular Back Screen
1:1
M-A
M-B
M-C
M-D
M-E
M-F
M-G
M-H

8
7. Hang and Secure the Screen
•Turn the bottom screw counterclockwise to tighten it.
•Turn the bottom screw clockwise to loosen it.
•Use a padlock to prevent the theft of display. (padlock is not included.)
IMPORTANT: Make sure the display is correctly mounted before releasing the display.

9
8. Assemble the Camera Shelf
Attach the camera shelf to proper position
according to the TV size

10
9. Cable Management

11
10.Adjustment
Height markings represent
the distance from the floor to
the center of the TV screen.

12
11.Troubleshooting
If the columns are not properly aligned, the mounting plate may fail to attach to the columns.
Follow the steps below to re-assemble the columns.

13
Maintenance
•Check if the bracket is secure and safe to use at regular intervals (at least every three months).
•Please contact your distributor if you have any questions.