Digitus DS-33156 User manual

PCIe Card to SATA III + NGFF (M.2)
Manual DS-33156
Features
1. The small capacity of high performance SATA M.2 solid state hard drive and low cost and high capacity
mechanical hard disk drive mix to improve the overall performance of the system
2. The maximum transmission rate is 6Gbps
3. Support hot plug
4. Compatible with SATA I, SATA II, SATA III hard disk
5. SATA III 6.0Gbps* maximum transmission rate
6. M.2 Specification Revision 0.9
7. Serial ATA specification 3.2
8. Support NGFF (M.2) card size: 22*30, 22*42, 22*60, 22*80
9. Support B (M.2) key NGFF type
Note: support M.2 (NGFF) SATA solid state drive
The efficiency mainly depends on the M.2 (NGFF) solid state hard disk master control IC and the size of the
capacity

Specification
Part Name PCI-E to M.2 (NGFF) +SATA3.0 card
Chipset ASM1061
interface M.2 (NGFF)*1, SATA3.0*1
Apply to the slot PCI-E X1, PCI-E X4, PCI-E X8, PCI-E X16
Weight 34g
Support system Windows/XP/2003/2008/Vista/7/8/8.1/10/Linux
Hardware Installation
Step 1. Turn off your computer and devices connected to it.
Step 2. Remove the computer’s cover. Refer to your computer user’s manual for more details
Step 3. Find an unused NGFF (M.2) slot and remove the metal bracket. Save the bracket screw for later
use
Step 4. Align the card horizontally with respect to the NGFF (M.2) slot and insert it into the slot firmly
and evenly, take care not to force it into the slot, once you have properly positioned the
DS-33156 into the slot, then replace the computer cover and reconnect the power cord.
Driver Installation
Installing Driver for Windows 98, 2000, XP, server2003, Vista, Win7, Win8 and Win10
1. Start Windows and insert the driver CD into the CD-ROM drive, assume drive D.
2. Windows will automatically detect the card. Ignore the driver installation wizard.
Package Content
PCIe Card to SATA III + NGFF (M.2)
User manual
CD Driver
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive 2014/30/EU
and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the
below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In this case, the user
can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany