Digitus DS-30020-1 User manual

1-PORT PARALLEL INTERFACE
CARD, PCI EXPRESS
Manual
DS-30020-1 Rev.2

Description,
1-Port Parallel Interface Card, PCI Express is a single
chip solution that fully integrates PCIe2.0 Gen 1
end-point controller. It has parallel port, which can
be easily to expand more devices. The Parallel port
is a bidirectional extension of the existing PC
parallel interface; it is compatible with IEEE1284-
SPP / Byte / ECP mode.
Specification
Single-lane(x1)PCI-Express End-point controller
with PHY integrated
Compliant with PCI Express 2.0 Gen1
Compliant with PCI Power Management 1.2
Supports operating System: Linux kernel
4.x/3.x/2.6.x, Windows XP / Vista / Win7 / Win8
/ Win8.1 / Win10 32 / 64bit

Parallel port
Compatible with IEEE1284-SPP / Byte /
ECP mode
Package content
1 x PCIe AX99100 Parallel card
1 x User’s Manual
1 x CD
1 x Low profile bracket
System Requirements
Linux, Windows XP / Vista / Win7 / Win8 /
Win8.1 / Win10 32bit or 64 bit
Available PCI Express x1slot

Hardware installation
1. Turn off the computer and unplug the power
cord
2. Remove the computer cover and the PCIe card
slot cover from the slot that matches your PCIe
card
3. Insert the PCIe card edge connector into the slot
and secure the bracket to the chassis
4. Replace the computer cover, then plug in the
power cord
5. Power on the computer

Install Drivers
Windows®Operating Systems
You must have administrative rights to the
operating system to install the drivers.
1. Insert the CD driver bound with PCIe AX99100
Parallel card driver into your CD-ROM drive
2. If the Found New Hardware Wizard screen is
displayed, click Cancel
3. Find the drive disk and open the drive files.
4. Open the corresponding driver according to the
system type:
Type for Windows XP/Vista/Win7:
For_32bit:
D:\Ax99100\xp.vista.win7\AX99100_Win7_Vista_
XP_32bit_Driver_v1.12.2.0_WHCK\
AX99100_Setup.exe

For_64bit:
D:\Ax99100\xp.vista.win7\AX99100_Win7_Vista_
XP_64bit_Driver_v1.12.2.0_WHCK\
AX99100_Setup.exe
Type for Windows 8/Win8.1/Win10
For_32bit:
D:\Ax99100\win8.win8.1\win10\AX99100_Win10_8
.x_32bit_Driver_v1.18.2.0_WHCK\
AX99100_Setup.exe
For_64bit:
D:\Ax99100\win8.win8.1\win10\AX99100_Win10_8
.x_64bit_Driver_v1.18.2.0_WHCK\
AX99100_Setup.exe
5. Click “AX99100_Setup.exe”
6. Follow the instructions in the install wizard to
finish it

To Verify Windows® Driver
Installation
Click on the Device Manager tab in System
Properties, which you access from the Windows
Control Panel. If you use the 2S1P card, you should
see one “AX99100 PCIe to Multi Mode Parallel
Port”…installed under Ports (COM & LPT) item.
Support
More information and settings please refer to the
User Guides or you can contact us.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of
the shipping content. If the Declaration of Conformity is missing, you can request it by
post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany