INTRODUCTION
This VGA UTP Extender Receiver with Audio is an ideal device for remote
viewing. Each receiver by Cat5 x1 works with the Sender as a full functional
module by receiving the distributed signal from the sender and transmitting to
displays individually. Only by the most inexpensive UTP cable with cross stand
inside, the full functional module extend the VGA display max up to 300 meters.
It offers solutions for VGA retail and show site and Projector factory, noise
space and security concerns, data center control, information distribution,
conference room presentation, school and corporate training environments.
FEATURES
This device has many features that enable it to perform in a superior manner.
Among those features you will find:
●Extend VGA video and stereo audio signal up to 300m over one UTP cable
●Supports resolution of up to 1920x1200.
●Work with monitors, projectors, HDTV, and flat panels.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure
the following items are contained in the shipping carton:
1) 1 x VGA UTP Extender Receiver Unit
2) 1 x User’s Manual
3) 2 x 5V / 2A DC Power Supply
CONNECTION AND OPERATION
1) Connect Sender and Receiver using a CAT-5e/6 cable
2) Connect VGA output of Receiver to remote display
3) Plug the 5V@2A power supply into the Receiver
6) Optional connect Audio to Sender and Receiver side
Attention: Insert / Extract cable gently.
