Click Finish to complete the WPS configuration.
(Please check your Wireless adapter Manual with WPS configuration)
4. You should see icons for the computer you added and for the other
computers and devices that are part of the network.
Adding a wired (Ethernet) computer to the WiFi-Repeater
1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop
with the Wi-Fi Repeater with enclosed RJ45 Cable.
2. To confirm that you added the computer, do the following:
Open Network by clicking the Start button, and then clicking Control Panel.
In the search box, type network, and then, under Network and Sharing Center, click
View network computers and devices. You should see icons for the
computer you added and for the other computers and devices that are part of the
network.
For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
How to configure your computer/laptop with
the Network IP Address
1. Log on to the computer.
2. Click the “Start” button (it should be located at
the lower-left corner of your screen), then click
“Control Panel”. Click “View Network Status and
Tasks”, and then click “Manage Network
Connections”. Right-click “Local Area Network”,
then select “Properties”. When the “Local Area
Connection Properties” window appears, select
“Internet Protocol Version 4 (TCP/IPv4)” and
then click “Properties”.
