Digitus DS-55901 User manual

USER MANUAL
DS-55901
Table of Contents
1.0 Introduction……………………………………………………..1
2.0 Specifications…………………………………………..………2
3.0 Package Contents……………………………………………..3
4.0 Panel Descriptions………………………………………….…3
5.0 Connection and Operation….……………………………….3

１
HDMI REPEATER, DS-55901
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This is a kind of upgrade HDMI Repeater. It extends the length of HDMI cable up
to 35M by regenerating the HDMI signal before it sends the outputs to the HDMI
monitor or projector. Meanwhile, according to the length of HDMI cable the
special designed EQ can be adjusted to reach the best transmission function.
This HDMI Repeater adopts the iron shell for better EMI elimination and it will
clean out the digital noise (sparkles) in your picture. With the unique designed
structure, this repeater can be fixed up with the donated nogs in “L” shape.
This repeater compatible well for HD-DVD,SKY-STB, PS3, Xbox36etc. It offers
solutions for residential consumers: HDTV retail and show site, HDTV, STUB,
DVD and Projector factories, noise, space and security concerns, data center
control, information distribution, conference room presentation, school and
corporate training environments.
1.1 FEATURES
This kind of the HDMI Repeater has many features that enable it to perform in a
superior manner. Among those features you will find:
Support HDMI HighSpeed (1.3b)
Support highest video resolution 1080p.
Support 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.
Support 12bit per channel (36bit all channel) deep color.
HDCP pass-through.
Iron Shell for better EMI elimination.
Support uncompressed audio such as LPCM.
Support compressed audio such as DTS Digital, Dolby Digital（including
DTS-HD and Dolby True HD）.
8 levels of equalization settable by turning EQ from 0 to 7, so that support
different length of HDMI cable between 1m to 35m.
Unique designed structure for better connection.
Support 3D all format, including [email protected]/24Hz,
[email protected]/60Hz/50Hz.

２
2.0 SPECIFICATIONS
Signal Inputs/Output
Input Video Signal 5 Volts p-p (TTL)
Maximum Single Link Range 1920x1080P
Output Video HDMI HighSpeed (1.3b)
HDMI Input/Output Connector Type A 19 pin
Operating Frequency
Vertical Frequency Range 50/60Hz
Video Amplifier Bandwidth 2.25Gbps/225MHz
Resolutions(HDTV)
Interlaced(50&60Hz) 480i,576i,1080i
Progressive(50&60Hz) 480p,576p,720p,1080p
Mechanical
Size(H-W-D) 5X4X3.5MM
Weight(Net) 78g
Warranty
Limited Warranty 2 Year Parts and Labor
Environmental
Operating Temperature 0 ℃to +70℃
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature -10℃to +80℃
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5V DC@2A(optional)
Power consumption (Max) 3W
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
AC Power Adapter 1
User Manual English, German
Note: Specifications are subject to change without notice.

３
3.0 Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
HDMI Repeater
Two “L” shape nooks
One nut
User's Manual
4.0 PANEL DESCRIPTIONS
5.0 CONNECTION AND OPERATION
1) Connect the output of the source device into the input of HDMI Repeater and
connect the output to the HDMI display unit. The HDMI Repeater is put close
to the HDMI display unit (Input cables are optional)
*Please refer to connection diagram section.
2) Adjusting EQ from 0 to 7, according to the different length of HDMI cable.
3) Insert the DC side of 5v power supply if the 5v of the source is not enough .
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM