Digitus DS-40132 User manual

HDMI Audio Extractor
Manual
DS-40132

１
1.0 Introduction
The HDMI Audio Extractor (DS-40132) can support the most popular 4K video
and it can extract audio from HDMI source professionally. You are able to choose
5.1 channel Digital optical audio or 2.1 channel stereo audio by a simple dip
switch.
It is a great device to work with home theater system or any professional audio
amplifier. DS-40132 has also build-in HDMI booster to support long distance
transmission up to 30m.
2.0 Feature
No need to install drivers, portable, flexible, plug and play
Resolutions up to 4K x 2K@30Hz
Support HDMI booster function
1080P 30m (28AWG)
4K 20m (28AWG)
CEC Pass-through
HDCP 1.3
Support Optical 5.1CH and 2.1CH stereo audio
Support HDMI output audio format: DTS-HD/ Dolby-True HD
3.0 Specifications
Input Video Signal HDMI Signal
Audio switch 1
Audio Output interface HDMI, SPDIF and 3.5mm stereo
Support Distance 30m for 1080P video (28AWG)
(15m to source, 15m to display)
20m for 4K video (28AWG)
(10m to source, 10m to display)
Dimension (mm) 60.5(D) x54(W) x 20.5(H)
Weight (g) 40
Vertical Frequency Range 50/60Hz
Video Amplifier Bandwidth 3.0Gbps/300MHz
Interlaced Resolutions (50&60Hz) 480i,576i,1080i
Progressive Resolutions (50&60Hz) 480p,576p,720p,1080p,4k x2k@30Hz
Operating Temperature 0℃to 70℃
Operating Humidity 10% to 85% RH (no condensation)
Storage Temperature -10℃to +80℃
Storage Humidity 5% to 90% RH (no condensation)
Power Supply USB Power Cable
Power Consumption 5W

２
Note: Specifications are subject to change without notice
4.0 Package Contents
1. Main unit
2. USB Power Cable
3. User Manual
5.0 Panel Descriptions

３
6.0 Connection and Operation
Note:
1) When the converter of HDMI Input receives 5.1CH Surround Sound Signal and
button is switched to 2.1CH. The SPDIF, 3.5mm audio and HDMI output audio
will be corresponding to 2.1CH.
2) When the converter of HDMI Input receives 5.1CH Surround Sound Signal and
button is switched to 5.1CH. The HDMI output will also send 5.1CH signals.
However, if the output device only support 2.1CH signal, then the HDMI output
and SPDIF will be mal-function.
3) When the converter of HDMI input receive 2.1CH Signal only, the button of 2.1
and 5.1CH are useless. All output devices will be provided 2.1CH Signal.
Note: If wrongly installed or improperly used in the living area, the device can cause interference in radios
and other electronic devices. Appropriate use is when the device, as far as feasible, is operated with shielded
connection cables (with network products in addition to category 5 shielded cables and higher). The device
has been tested and falls within the limits of class B computing equipment according to the requirements of
EN 55022.
Warning: This device conforms with test category B - it can cause radio interference in the living area; in this
case the operator may demand that appropriate measures are implemented and arise for this reason.
Declaration of conformity: The device fulfills the EMV requirements according to EN 55022 for ITE and EN
55024. Devices with external or integrated power supply furthermore fulfill the requirements of EN 61000-3-2
and EN 61000-3-3. In this way, the fundamental protection requirements of the EMV-2004/108/EC guideline
are fulfilled. The CE conformity has been proven. The pertinent declarations are deposited with the
manufacturer.
www.assmann.com
ASSMANN Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany