Dimension One Spas @home Dream HP User manual

2002 @ Home Hot Tubs
Owner’s Manual
ii

2002 @ Home Hot Tubs
Owner’s Manual
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS ............................................................................1
IMPORTANT SAFETY INSTRUCTIONS (CSA SAFETY INFORMATION)............................................................................ 2
HYPERTHERMIA ........................................................................................................................................................................................ 5
DO’S AND DON’TS.................................................................................................................................................................................. 6
WARNING SIGN....................................................................................................................................................................................... 7
HOT TUB FEATURES............................................................................................................8
JET SYSTEM SELECTOR VALVE (COVE MODEL ONLY) .......................................................................................................................... 8
NECK JETS (DREAM HP MODEL ONLY)................................................................................................................................................ 8
PROGRAMMABLE DIGITAL CONTROL............................................................................9
TOP SIDE CONTROL................................................................................................................................................................................ 9
DIGITAL DISPLAY MESSAGES .................................................................................................................................................................11
“OH” – Overheat Protection ...............................................................................................................................................................................11
Flashing LED on the Control Panel.....................................................................................................................................................................11
Flashing Temperature on the Display ...............................................................................................................................................................11
USING THE PROGRAMMABLE DIGITAL CONTROLLER ........................................................................................................................12
Filter Cycle Start Time ...........................................................................................................................................................................................12
Filter Cycle Duration...............................................................................................................................................................................................12
Number of Filter Cycles.........................................................................................................................................................................................12
Temperature Unit Selection.................................................................................................................................................................................12
INITIAL STARTUP .................................................................................................................................................................................... 12
CARE FOR YOUR HOT TUB..............................................................................................14
DRAINING YOUR HOT TUB .................................................................................................................................................................14
FILTER CLEANING .................................................................................................................................................................................. 14
LIGHT BULB REPLACEMENT................................................................................................................................................................... 14
CARE FOR THE HOT TUB SURFACE – ULTRALIFE AND GRANITECH.................................................................................................15
Granitex

/Quarite Plus

.......................................................................................................................................................................................15
DIMENSION ONE “ ENVIROTECT” SKIRTS AND VINYL COVERS.......................................................................................................15
CARE FOR THE WOOD HOT TUB CABINET .......................................................................................................................................15
CARE OF THE HOT TUB COVER........................................................................................................................................................... 16
SPECIAL COLD WEATHER INSTRUCTIONS ..........................................................................................................................................16
Items Required for Winterizing...........................................................................................................................................................................16
Procedure for Winterizing ....................................................................................................................................................................................16
Spring Time Startup...............................................................................................................................................................................................18
WARRANTY SERVICE INFORMATION...........................................................................18
GLOSSARY OF TERMS........................................................................................................19
TROUBLESHOOTING GUIDE ...........................................................................................20
HEATING SYSTEM...................................................................................................................................................................................20
ELECTRICAL SYSTEM............................................................................................................................................................................... 20
WATER SYSTEM......................................................................................................................................................................................21
iii

2002 @ Home Hot Tubs
Owner’s Manual
iv

2002 @ Home Hot Tubs
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
When installing and using this electrical equipment, basic safety precautions should always be followed, including:
Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by
children. To avoid accidents, ensure that children cannot use this spa unless they are supervised at
all times.
Risk of Serious Injury or Death. The suction fittings in this spa are sized to match the specific water
flow created by the pump. Should the need arise to replace the suction fittings or the pump, be sure
that the flow rates are compatible.
Never operate the spa if the suction fittings are broken or missing. Never replace a suction fitting
with one rated less than the flow rate marked on the original suction fitting.
Risk of Electric Shock. Install at least 5 FEET (1.5 m), from all metal surfaces. As an alternative, a spa
may be installed within 5 feet of metal surfaces if each metal surface is permanently connected by a
minimum No. 8 AWG (8.4 mm2) solid copper conductor attached to the wire connector on the
grounding lug, inside the equipment compartment on the equipment can.
Risk of Electric Shock. Do not permit any electrical appliance, such as a light, telephone, radio,
television, etc. within 5 feet (1.5 m) of a spa.
The electrical supply for this spa must include a suitably rated switch or circuit breaker to open all
ungrounded supply conductors to comply with section 680-42 of the National Electrical Code,
ANSI/NFPA 70-1993. The disconnect must be readily accessible and visible to the spa occupant but
installed at least 5 feet (1.5 m), from the spa water.
To reduce the risk of injury, do not permit children to use this spa unless they are closely
supervised at all times.
A grounding wire connector is provided on this spa to connect a minimum No. 8 AWG (8.4 mm2)
solid copper conductor between this unit and any metal equipment, metal enclosures of electrical
equipment, metal water pipe, or conduit within 5 feet (1.5 m) of the spa.
To Reduce the Risk of Injury: The water in a spa should never exceed 104° F (40° C). Water
temperatures between 100° F (38° C) and 104° F (40° C) are considered safe for a healthy adult.
Lower water temperatures are recommended for young children and when spa use exceeds 10
minutes.
To Reduce the Risk of Injury:
Since excessive water temperatures have a high potential for causing fetal damage during the early
months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to
100° F (38° C).
1

2002 @ Home Hot Tubs
Owner’s Manual
To Reduce the Risk of Injury:
Before entering a spa, the user should measure the water temperature with an accurate
thermometer since the tolerance of water temperature-regulating devices may vary as much as +/-
5° F (2° C).
To Reduce the Risk of Injury:
The use of alcohol, drugs, or medication before or during spa use may lead to unconsciousness with
the possibility of drowning.
To Reduce the Risk of Injury:
Persons suffering from obesity or with a medical history of heart disease, low or high blood
pressure, circulatory system problems, or diabetes should consult a physician before using a spa.
To Reduce the Risk of Injury:
Persons using medication should consult a physician before using a spa since some medication may
induce drowsiness, while other medication may affect heart rate, blood pressure, and circulation.
Do not attempt to remove the light housing cover without lowering the water level below the light
housing cover.
Do not block air intakes located on the front left corner underneath the hot tub (the front right
corner for the Chairman II and Triad II) and under the equipment access panel. Resulting
malfunctions are not covered under warranty.
IMPORTANT SAFETY INSTRUCTIONS (CSA SAFETY
INFORMATION)
When using this electrical equipment, basic safety precautions should always be followed, including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. A green colored terminal or a terminal marked G, GR, Ground, Grounding, or the symbol * is located inside
the supply terminal box or compartment. To reduce the risk of electric shock, this terminal must be
connected to the grounding means provided in the electric supply service panel with a continuous copper wire
equivalent in size to the circuit conductors supplying this equipment.
* IEC Publication 417, Symbol 5019.
3. At least two lugs marked “BONDING LUGS” are provided on the external surface or on the inside of the
supply terminal box/compartment. To reduce the risk of electric shock, connect the local common bonding
grid in the area of the hot tub or spa to these terminals with an insulated or bare copper conductor not
smaller than No. 6 AWG.
4. All field-installed metal components such as rails, ladders, drains or other similar hardware within 3 meeters of
the spa or hot tub shall be bonded to the equipment grounding bus with copper conductors not smaller than
No. 6 AWG.
5. SAVE THESE INSTRUCTIONS.
2

2002 @ Home Hot Tubs
Owner’s Manual
Children should not use spas or hot tubs without adult supervision.
AVERTISSEMENT: NE PAS LAISSER LES ENFANTS UTILISER UNE CUVE DE RELAXATION SANS
SURVEILLANCE.
Do not use spas or hot tubs unless all suction guards are installed to prevent body and hair
entrapment.
AVERTISSEMENT: POUR ÉVITER QUE LES CHEVEUX OU UNE PARTIE DU CORPS
PUISSENT TRE ASPIRÉS, NE PAS UTILISER UNE CUVE DE RELAXATION SI LES GRILLES DE
PRISE D’ASPIRATION NE SONT PAS TOUTES EN PLACE.
People using medications and/or having adverse medical history should consult a physician before
using a spa or hot tub.
AVERTISSEMENT: LES PERSONNES QUI PRENNENT DES MÉDICAMENTS OU ONT DES
PROBLÈMES DE SANTÉ DEVRAIENT CONSULTER UN MÉDECIN AVANT D’UTILISER USE
CUVE DE RELAXATION.
People with infectious diseases should not use a spa or hot tub.
AVERTISSEMENT: LES PERSONNES ATTEINTES DE MALADIES INFECTIEUSES NE
DEVRAIENT PAS UTILISER UNE CUVE DE RELAXATION.
To avoid injury, exercise care when entering or exiting the spa or hot tub.
AVERTISSEMENT: POUR ÉVITER DES BLESSURES, USER DE PRUDENCE EN ENTRANT
DANS UNE CUVE DE RELAXATION ET E SORTANT.
3

2002 @ Home Hot Tubs
Owner’s Manual
Do not use drugs or alcohol before or during the use of a spa or hot tub to avoid unconsciousness
and possible drowning.
AVERTISSEMENT: POUR ÉVITER L’ÉVANOUISSEMENT ET LA NOYADE EVENTUELLE, NE
PRENDRE NI DROGUE NI ALCOOL AVANT D’UTILISER UNE CUVE DE RELAXATION NI
QUAND ON S’Y TROUVE.
Pregnant or possibly pregnant women should consult a physician before using a spa or hot tub.
AVERTISSEMENT: LES FEMMES ENCEINTES, QUE LEUR GROSSESSE SOIT CONFIRMÉE OU
NON, DEVRAIENT CONSULTER UN MÉDECIN AVANT D’UTILISER UNE CUVE DE
RELAXATION.
Water temperature in excess of 38°C may be injurious to your health.
AVERTISSEMENT: IL PEUT TRE DANGEREUX POUR LA SANTÉ DE SE PLONGER DANS DE
L’EAU À PLUS DE 38°C.
Before entering the spa or hot tub, measure the water temperature with an accurate thermometer.
AVERTISSEMENT: AVANT D’UTILISER UNE CUVE DE RELAXATION MESURER LA
TEMPÉRATURE DE L’EAU À L’AIDE D’UN THERMOMÈTRE PRÉCIS.
Do not use a spa or hot tub immediately following strenuous exercise.
AVERTISSEMENT: NE PAS UTILISER UNE CUVE DE RELAXATION IMMEDIATEMENT APRÈS
UN EXERCICE SATIGANT.
4

2002 @ Home Hot Tubs
Owner’s Manual
Prolonged immersion in a spa or hot tub may be injurious to your health.
AVERTISSEMENT: L’UTILISATION PROLONGÉE D’UNE CUVE DE RELAXATION PEUT TRE
DANGEREUSE POUR LA SANTÉ.
Do not permit electric appliances (such as a light, telephone, radio, television, etc.) within 1.5 m of
this spa or hot tub.
AVERTISSEMENT: NE PAS PLACER D’APPAREIL ÉLECTRIQUE (LUMINAIRE, TÉLÉPHONE,
RADIO, TÉLÉVISEUR, ETC.) À MOINS DE 1.5 M DE CETTE CUVE DE RELAXATION.
Maintain water chemistry in accordance with manufacturer’s instructions.
ATTENTION: LA TENEUR DE L’EAU EN MATIERÈS DISSOUTES DOIT TRE CONFORME AUX
DIRECTIVES DU FABRICANT.
Hyperthermia
Prolonged immersion in hot water may induce hyperthermia. A description of the causes, symptoms, and effects of
hyperthermia are as follows: Hyperthermia occurs when the internal temperature of the body reaches a level several
degrees above the normal body temperature of 98.6°F, or 37°C. The symptoms of hyperthermia include dizziness,
drowsiness, lethargy, and fainting. The effects of hyperthermia include:
• Failure to perceive heat,
• Failure to recognize the need to exit spa,
• Unawareness of impending hazard,
• Fetal damage in pregnant women,
• Physical inability to exit spa,
• Unconsciousness resulting in the danger of drowning.
The use of alcohol or drugs can greatly increase the risk of fatal hyperthermia in hot tubs and spas.
AVERTISSEMENT: LA CONSOMMATION D’ALCOOL OU DE DROGUE AUGMENTE
CONSIDÈRABLEMENT LES RISQUES D’HYPERTHERMIE MORTELLE DANS UNE CUVE DE
RELAXATION.
5

2002 @ Home Hot Tubs
Owner’s Manual
Persons suffering from heart disease, diabetes, high or low blood pressure, any condition requiring
medical treatment, pregnant women, the elderly, or infants should consult with a physician before
using a spa.
The consumer products safety commission has stated that the water temperature in a spa or hot
tub should not exceed 104° F (40° C). Immersion in water in excess of 104° F (40° C) can be
hazardous to your health.
Observe a reasonable time limit when using the spa. Long exposures at higher temperatures can
cause high body temperature. Symptoms may include dizziness, nausea, fainting, drowsiness, and
reduced awareness. These effects could result in possible drowning.
Do not use the spa under the influence of alcohol, narcotics, or other drugs. Use of the spa under
these conditions may lead to serious consequences.
Always test the hot tub water temperature before entering the spa. Enter and exit the spa slowly.
Wet surfaces can be very slippery.
Never bring any electrical appliances into or near the spa. Never operate any electrical appliances
from inside the spa or when you are wet.
Proper chemical maintenance of spa water is necessary to maintain safe water and prevent possible
damage to spa components.
Use the spa straps and clip tie downs to secure the cover when not in use. This will help to
discourage unsupervised children from entering the spa and keep the spa cover secure in high wind
conditions. There is no representation that the cover, clip tie downs, or actual locks will prevent
access to the spa.
Do’s and Don’ts
• DO test water temperature with your hand before entering to be sure that it’s comfortable.
• DO keep the spa cover closed when the spa is not in use. This is also the key to economical spa operation.
• DO check the operation of the equipment compartment cooling fan monthly, by activating a pump and
checking for airflow out of the lower left or right front corner of spa.
• DON’T block the equipment compartment vents. Blockage may cause damage to the spa equipment and will
void the warranty.
• DON’T block or sit on the filter recess area.
6

2002 @ Home Hot Tubs
Owner’s Manual
Warning Sign
Each spa has been provided with a warning sign and an Important Notice label.
This label outlines safety precautions. This sign should be permanently placed in a location that is visible to the spa user.
Replacement signs can be obtained from:
Dimension One Spas
2611 Business Park Drive
Vista, CA 92083
[phone]
7

2002 @ Home Hot Tubs
Owner’s Manual
Hot Tub Features
Congratulations! You have purchased one of the finest portable hot tubs available. Take the time to read these
instructions carefully. If installed and maintained properly your hot tub will provide many years of enjoyable, trouble-
free operation. Read all of the instructions and view your owner’s manual video for further reference on hot tub
operation. If you have any questions, please contact your local Authorized Dimension One Spas Dealer.
The following features are included on your hot tub:
• UL and ETL listed/CUL approved
• Completely self-contained with load sharing capabilities
• 100% foam insulated (optional)
• All hot tub shells are formed from Protect Plus™ high impact thermoplastic or Granitech™ Acrylic
• Designed for indoor or outdoor use
• Top access, easy to clean filter systems
• Water level referencing Weir skimmer
• Handcrafted cabinets
• A variety of interchangeable jets
• Polyethylene floor completely seals the hot tub, eliminating moisture or insect intrusion
• Built-in, automatic freeze protection
• Automatic high/low speed filtration cycles
Jet System Selector Valve (Cove Model Only)
The Cove hot tub is the only @ Home model equipped with spa-side Selector Valve.
The valve can be used to divert jet power from one area within the hot tub to another.
The valve is fully adjustable and can be used to suit the bather’s taste. The valve may
offer some resistance to operation when the hot tub pump is on. This is a normal
condition, and is caused by the high rate of water flow and pressure that travels through
the valves.
Neck Jets (Dream HP Model Only)
The Dream HP has two VCR Mini Directional Jets in the 1 o’clock seat of the spa that
act as neck jets.
8

2002 @ Home Hot Tubs
Owner’s Manual
Programmable Digital Control
Advanced microprocessor technology has been utilized to produce the Programmable Digital Control. Easy to use and
understand, Dimension One Spas has put every hot tub function within fingertip control. Temperature setting, jet
power control, and the hot tub light are all spa-side accessible. That means you don’t have to get out of the hot tub to
enjoy complete control of all hot tub functions. Safety is assured through design concepts and materials that meet or
exceed the most stringent requirements of Underwriters Laboratories (UL), Edison Test Labs (ETL) and the Canadian
Standards Association (CSA).
Digital Control lets you relax and enjoy everything your hot tub has to offer.
Gain a thorough knowledge of the following information before starting up your spa
Top Side Control
Control Function
1
1. Digital Display
The digital display indicates (depending on program mode) temperature in
degrees F or C, time, filter cycle start time, filter cycle duration time, and
number of filter cycles. For more information see “Digital Display Messages”.
2
2.FILTER Indicator Light
This light will illuminate when an active filtration cycle is in progress.
3
3.SETPOINT Indicator Light
This light will illuminate when the spa water has reached the temperature
selected by the Temperature Pads
9

2002 @ Home Hot Tubs
Owner’s Manual
Control Function
4
4.HEAT Indicator Light
This Light is illuminated the heater is on.
5
5. JETS 1 Pad and Status Light
When the JETS 1 control pad is pushed the first time, the primary pump will
turn on in low speed. When the JETS 1 pad is pressed a second time, the
primary pump will switch to high speed. Push the JETS 1 pad a third time and
the primary pump will be turned off.
NOTE: The Dream HP, Sojourn HP and Cove HP are dual pump spas. The
upper control panel will have two jet pads (JETS 1 and JETS 2). The primary
pump (JETS 1) is a two-speed pump with a High and Low speed setting. The
secondary pump (JETS 2) is a single speed pump with only one speed setting. All
other @Home Hot Tubs have one two speed jet pump and therefore have only
one jet pad. If the spa is heating, pump one will run continuously at low speed
until the pre-set temperature is reached. The set point light indicator will be on
when the display is showing the water temperature set point. It will be off when
the display is showing the actual water temperature.
NOTE: When a bather turns on a pump by pressing either JETS 1 or JETS 2, it
will run for 30 minutes and then turn off. A new 30 minute cycle begins for
each pump when its respective JETS pad is pushed. This auto shut-off cycle is a
safety feature and also allows for convenient filtration, immediately after use of
the spa.
6
6. JETS 2 Pad
If your hot tub is equipped with a secondary pump (Dream HP, Sojourn HP and
Cove HP) then you will have a JETS 2 pad. The first time the JETS 2 pad is
pushed it will start the secondary (single speed pump) and when pushed a
second time it will stop the secondary pump.
7
7. LIGHT Pad and Status Light Push the LIGHT control pad once to turn
the light on. Push the LIGHT control pad a second time to turn off the light.
The light LED is on or off according to the light’ current state. The light will
automatically turn off after 1 hour of continuous operation.
NOTE: If the Dynamic L.E.D. is installed, the low, medium, and high settings
are disabled. The Light pad turns the Dynamic L.E.D. on and off.
10

2002 @ Home Hot Tubs
Owner’s Manual
Control Function
8
8.TEMPERATURE Pads
Pushing the UP (+) pad increases the temperature and pushing the DOWN (-
) pad decreases the temperature. Push the respective pad one time for each
degree of temperature change, or push and hold the pad for rapid adjustment.
The actual hot tub water temperature will remain in the Digital Display
window until a temperature pad is pushed. When the UP or DOWN pad is
pushed the Digital Display will indicate the new temperature setting, with the
SET POINT Indicator Light above the Digital Display. Once the new
temperature is set, the actual hot tub water temperature will again be
indicated. The hot tub will heat to the pre-set temperature automatically.
9
9. PROGRAM Pad
The PROGRAM pad is used for several different functions including: Filter
Cycle Duration, Filter Cycles Frequency, and Temperature Unit selection.
The paragraphs following this table will explain how these features are set.
To initiate the programming sequence at any time, push and hold the
PROGRAM pad for 3 seconds. If, within 10 seconds, you do not proceed with
the hot tub programming, the hot tub will automatically exit the programming
sequence and revert to the pre-set factory default settings. To exit the
programming sequence at any time, do not press any pad for 10 seconds. Any
programming changes made up to that point are saved.
Digital Display Messages
The following messages may appear in the Digital Display:
“OH” – Overheat Protection
When “OH” is displayed on the control system Digital Display, the hot tub is in a high temperature condition. If such a
condition exists, DO NOT ENTER THE WATER. If this happens, remove the hot tub cover and allow the water
to cool below 110°F (43.3°C). Reset the power to the spa by resetting the GFCI breaker. If the problem recurs, turn
off all power to the hot tub and contact your local Authorized Dimension One Spas Dealer, or authorized service
center.
Flashing LED on the Control Panel
If you see 3 flashing LEDs on the Digital Display, DO NOT ENTER THE WATER. The system has detected a
problem. Check the Digital Display and if it is displaying the “OH” symbol, contact your local Authorized Dimension
One Spas Dealer, or authorized service center. If the Digital Display is displaying the temperature, check the water
level and clean the filters. If the problem persists, reset the power to the spa by resetting the GFCI breaker. If the
error is not resolved after resetting the spa, contact your local Authorized Dimension One Spas Dealer, or authorized
service center.
Flashing Temperature on the Display
If you see a flashing temperature of 34° F (1.1°C) or 134° F (56.6°C), DO NOT ENTER THE WATER. The system
has detected a problem. Contact your local Authorized Dimension One Spas Dealer, or authorized service center.
11

2002 @ Home Hot Tubs
Owner’s Manual
Using the Programmable Digital Controller
To initiate the programming sequence at any time, push and hold the PROGRAM pad for 3 seconds. If, within 10
seconds, you do not proceed with the hot tub programming, the hot tub will automatically exit the programming
sequence and revert to the pre-set factory default settings. To exit the programming sequence at any time, do not
press any pad for 10 seconds. Any programming changes made up to that point will be saved.
Filter Cycle Start Time
To adjust the filter cycle start time, push the UP or DOWN pads and LIGHT pad as done in the Clock Set
programming mode to choose a time. Once the desired time is displayed, push the PROGRAM pad to accept the
selection and move into the Filter Cycle Duration programming mode.
You will be prompted later to set the filter cycle duration and the number of filter cycles. Be sure
to keep this in mind when programming your filter cycle start time. During the filter cycle, JET 1
will activate at high speed the first 5 minutes and the remainder of the filter cycle time at low
speed.
Filter Cycle Duration
To adjust the filter cycle duration, push the UP or DOWN pads to cycle through the choices of 60, 90, 120, 150 or
180 minutes (the default is 60). Once the desired time is displayed, push the PROGRAM pad to accept the selection
and move into the Number of Filter Cycles programming mode.
Long and/or numerous filter cycles could cause overheating of the hot tub - especially in hot
climates.
Number of Filter Cycles
To adjust the number of filter cycles per day, push the UP or DOWN pads to cycle through the number of filter cycles
- 1, 2, 3 or 4 (the default is 2). Once the desired number of cycles is displayed, push the PROGRAM pad to accept the
selection and move into the Temperature Unit Selection programming mode.
Temperature Unit Selection
To select temperature units push the UP or DOWN pads to toggle between °F (degrees Fahrenheit) or °C (degrees
Celsius). Once the desired temperature unit is selected push the PROGRAM pad to exit the programming mode.
Initial Startup
1. Locate the Top Side Control. Directly below this
control is the equipment compartment.
2. Use screwdriver to remove the spa panel screws.
The number of screws to be
removed will depend on the
make and model of spa.
12

2002 @ Home Hot Tubs
Owner’s Manual
3. Locate the owner’s packet inside in equipment compartment (plastic bag with parts and
manual). Inside the bag is a plastic hose bib.
4. Screw the hose bib onto the male fitting located at the bottom of
the hot tub on the pedestal, to the lower right of the equipment
compartment.
5. Close the valve on the side of the hose bib and screw the cap onto
the end of the hose bib.
6. Check the pump unions to be sure that they are tight to prevent the possibility of leakage in the equipment
compartment.
7. Fill your spa with water up to 6"(15.24 cm) below the lip of the spa.
8. Turn on the circuit breaker. One minute after the power is turned on, the spa will automatically begin its first,
one hour filtration cycle. Let the system run for 30 to 45 seconds to prime the pump. On two pump models,
Pump 2 will operate on high speed for the first minute of each filter cycle. If there is no jet action, then the
water level is too low or there is air trapped in the plumbing lines. To eliminate the trapped air, turn off the
pump(s) and loosen the top pump union slightly to let the air escape. Re-tighten the pump union and turn on
the pump again.
9. Your spa will automatically filter itself twice each day. At the beginning of each filtration cycle, the pump will
run on high speed for 5 minutes and then on low-speed for the remainder of the filter cycle. The second
filtration cycle will begin twelve hours after the start of the first. To reset the start of these cycles, simply turn
off power to the spa by opening the circuit breaker box, turn the breaker off, and then turn it back on. This
resets the filtration cycle to start one minute later. Or follow the procedure outlined in “Number of Filter
Cycles" and “Filter Cycle Duration”. The filter cycle LED indicator will be on when there is a filter cycle is
running.
10. A thermostat controls the spa temperature. Whenever there is a call for heat, your spa will turn on the
heater and the pump will run at low speed as necessary to maintain the temperature. Push the UP pad until
the desired temperature is indicated on the display screen. In a few seconds, the screen will start displaying
the current spa water temperature again. The maximum temperature that can be set is 104°F (40°C). Heating
will occur at the rate of 1 (0.55°C to 8°F (4.4°C) per hour.
13

2002 @ Home Hot Tubs
Owner’s Manual
On initial start-up, you can confirm that the heater is on by looking to see that the HEAT Indicator
Iight located above the Digital Display on the control panel is illuminated. Once you have verified
that the heater is functioning, you can reinstall the equipment door.
11. After completing the above steps, it is necessary to ensure proper water chemistry. See the Water Chemistry
section in this manual for the easy steps to maintaining clean and safe water. The schedule shown may require
more frequent adjustment depending on the bather load.
12. Place the thermal cover on the spa to conserve energy and to keep it ready for use.
Care for Your Hot Tub
Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by
children. To avoid accidents, ensure that children cannot use this system unless they are supervised
at all times.
Draining Your Hot Tub
All Dimension One hot tubs are gravity drained. Do not drain water onto your lawn or plants unless all of the bromine
or chlorine has dissipated from the hot tub water. The sanitizer in your hot tub water will dissipate quickly by leaving
the hot tub cover off and exposing the water to direct sunlight. Drain and replace your hot tub water every six
months. For heavy hot tub use, you may wish to change the water more frequently.
Filter Cleaning
Always turn off the power to the hot tub before cleaning the filter elements. Your hot tub is equipped with one or two
top access filter cartridges. We recommend that you clean the filters every month as preventative maintenance.
To clean the filter cartridge, remove the access lid covering the filter area. Lift the center float of the skimmer assembly
until it is fully extended. Hold the centerpiece of the assembly and turn it counter clockwise until the flats of the basket
are aligned with the securing tabs. Then pull the basket assembly straight up to remove. Next, remove the E-Z Lock
Filter cartridge by twisting the cartridge 1/4 turn counterclockwise to its stop. (Be careful not to overturn the filter)
Then lift the filter out of its canister. Clean the cartridge with a high-pressure garden hose. Every other cleaning, soak
the cartridge in a filter cleaning solution, rinse it thoroughly, and reinstall. Replace the skimmer basket assembly and the
access lid or cover. After cleaning, run the pump for a few minutes at high speed, then return to the heating mode.
Light Bulb Replacement
All systems are equipped with a 12 volt light using a GE912 bulb. To change the bulb:
1. Turn the power off and drain the system below the level of the
light.
2. Using the special tool provided in the owner’s manual packet,
unscrew the cover for the light housing.
3. Remove the old bulb and install the new bulb.
4. Use the special tool to replace the cover for the light housing.
5. Check to ensure proper operation of the new bulb before
refilling the system.
Do not attempt to remove the light housing cover without lowering the water level below the light
housing cover.
14

2002 @ Home Hot Tubs
Owner’s Manual
Do not attempt to remove the light housing cover without the special tool. If you are not able to
locate it, contact the Dimension One Spas’ Service Department to have one sent.
Be sure the O-ring is not damaged and is properly in place when replacing the lens. Contact
Dimension One Spas if a replacement O-ring is needed.
A Dynamic L.E.D. Light is available as an optional accessory for many models. This light is
preprogrammed with 13 different light shows. This light is also replaced in the same manner as
described in the previous paragraph. Contact your dealer or visit our Virtual Showroom at
http://d1spas.com to see if it is available for your model.
Care for the Hot Tub Surface – Ultralife and Granitech
Your hot tub has a very high quality finish. Stains and dirt will generally not adhere to the surface. We recommend
cleaning the entire shell surface with Dimension One Spas’ Water Line Cleaner. You may also use Dimension One
Spas’ ph/Alkalinity Increaser or mild cleaners like Soft Scrub. Be sure to thoroughly rinse the shell. After cleaning,
you will want to restore your hot tub shell’s original luster by using Dimension One Spas - Poli-Gloss.
Do not use “409” type cleaners or other caustic solutions as they may damage the hot tub shell
surface and void the warranty. If you are using baking soda to clean your hot tub shell, be careful
not to get it on the skirt. It may bleach the wood.
Do not use citrus-based cleaners on the shell surface.
Granitex/Quarite Plus
If your spa is equipped with this material you must keep the spa covered when it is empty. When the spa is empty and
the cover is not in place, and the spa is exposed to direct sunlight, it is vulnerable to ultraviolet light or solar damage.
Temperatures generated by sunlight can become concentrated in the shell surface causing the shell material to
delaminate from the urethane backing.
Dimension One “ EnviroTect” Skirts and Vinyl Covers
The Dimension One EnviroTect skirts are unaffected by most corrosive substances, and will not absorb moisture.
To maintain the original finish, clean with soap and water. No sealing or painting is required. To maintain a “nearly
original” appearance we recommend applying 303 Protectant at least once a month on the Dimension One
EnviroTect skirts and on the vinyl spa covers if they are exposed to direct sunlight. 303 Protectant is rated at 40
SPF (Sun Protection Factor).
Care for the Wood Hot Tub Cabinet
When properly cared for, the wood cabinet of your hot tub will maintain its beauty for many years. All woods react
differently to the elements by expanding and contracting. To protect your beautiful wood finish, re-stain it every 3-6
months with Dimension One Spas’ Redwood or Coastal Gray Stain, which serves as a good sealing agent for the
wood. Please note that the cabinet is not warranted against reaction to natural weather conditions. The wood must be
properly maintained. Should your hot tub cabinet require re-conditioning, try Dimension One Spas’Wood Refurbishing
Kit.
15

2002 @ Home Hot Tubs
Owner’s Manual
Care of the Hot Tub Cover
The thermal cover for your hot tub is an extremely durable foam insulated product. See the manufacturer’s literature
for proper cleaning instructions. When the hot tub is not in use, it is recommended that the cover tie downs always be
utilized to discourage unsupervised children and minimize heat loss. Small locks are also available for the cover tie
downs. In either case, these locking methods are not considered adequate to keep unauthorized people from entering
the hot tub.
Special Cold Weather Instructions
Slipping into your steamy water on a snowy, winter night is a refreshing experience. Many times, people who could
never imagine being outside in winter weather, find themselves spending their winter nights doing just that, while
relaxing in their hot tub with family and friends. Therefore, the best winterizing tips of all are to enjoy use of your
system year-round.
All systems manufactured by Dimension One Spas are designed for rigorous winter use. They are insulated to keep
operating costs down and to protect plumbing and equipment whenever the products are operational. Each product
line incorporates freeze protection mode to maintain water circulation during freezing conditions whenever the system
has proper electrical power and water level. Therefore, a fully operational system is your number one defense against
freeze damage.
If you find it completely necessary to drain your water during the winter months, in an area where freezing conditions
may exist, please adhere to all of the instructions in this section to minimize the risk of freeze damage. Failure to
complete any of the steps satisfactorily will increase the chance of freeze damage, as small amounts of water trapped in
pipes will expand as it freezes, and may result in damaged plumbing lines or fittings.
Dimension One Spas does not recommend that you drain your system for the winter. Freeze
damage caused by winterizing your system is specifically not covered by Your Warranty.
Items Required for Winterizing
• Phillips head screwdriver
• 16” (40.6 cm) Channel-lock pliers
• High pressure air blower
• Commercial grade wet-vacuum
• 3 gallons (11.37 liters) to 6 gallons (22.74 liters)
of Non-Toxic Antifreeze
• Strong, able-bodied people capable of lifting system
Into upright position
• Enough time (and patience) to perform all steps.
Procedure for Winterizing
1. Shut the power off to the system and make sure that it cannot be accidentally turned back on.
2. Remove filter elements from filter assembly.
3. Drain water from the system using the drain fitting and garden hose or you may use a submersible pump for
faster draining.
4. Open the equipment compartment and locate pumps and heater.
5. Remove all of the drain plugs from each pump.
6. Loosen unions on both sides of each pump, and the heater if applicable.
7. If your system has a Dynamic Jet Sequencer, please remove that access panel as well and loosen all unions on
each of the sequencer valves. There are 6 sequencer valves, that means that you will have to loosen 12
unions.
16