DIR H1108 User manual

H1108
Facial Steamer
Thank you for purchasing this product!
● Please read the entire instruction manual carefully before using the product.
Take note of any warnings included in this manual.
● Always keep this instruction manual handy and if you give the device to another
person, hand over the manual as it is an essential part of the product.
● Some components of the product may differ from the image that appears in
catalogues, websites,brochures, etc.
● In order to enhance the product, the manufacturer reserves the right to modify
its features and/or components without prior notice.

2
● This product has been designed to be used by beauty professionals at beauty salons
and should not be used for other purposes.
● Please note that any misuse of the device entails the loss of the guarantee.
● Do not make any modification to the device without the authorisation
● we shall not be held liable for any material or personal damage due to the misuse of the
product.
● This product should not be used on:
－People with metal implants in their body.
－People with pacemakers or heart problems.
－Pregnant women.
－People with sensitive skin, lesions, inflammations, or any skin problem or disease.
● With people undergoing medical treatment or a diagnostic process, the product must be
used with medical authorisation.
●Before using it for the first time and after each use, check the device and the mains cable
for any damage.
● Unplug the device from the mains before starting to clean it or undertaking any type of
maintenance.
● Do not use the product outdoors or in places where it may be affected by humidity or
inclement weather.
● If the power supply cable is defective, unplug the appliance immediately and inform
your dealer or specialised technician.
● Position the power supply cable properly so that people cannot trip over it and make
sure you plug it into an earthed socket.
● At the end of the working day, disconnect the device and unplug the power supply
cable from the mains.
● If you detect any anomaly in the operation of the product, please contact your
distributor or specialised technician.
● The device and accessories should be kept out of the reach of children.
● Only plug the device into a properly installed socket. The local mains voltage must
correspond to the technical specifications of the device.
● The power socket must be accessible in case you have to quickly unplug the device at
any given time.
● Always pull out the actual plug and not the mains cable.
● Never tamper with any electrical component or open up/repair any component of the
device，Only your distributor or specialised technician should repair the device.
●Do not switch on the device if there is visible damage to it or to the mains cable.
● Never touch the device or the mains cable with wet hands.
SAFETY INDICATIONS
PRECAUTIONS
CONTRAINDICATIONS
CORRECT USE OF THE DEVICE

3
It’s forbid to put oily material into water cup or herbal net; it may cause the problem of water
spray.
It’s not allowed spray from the above of the face by the steam hole, otherwise may causing
scald.
It’s not allowed to take the herbal cover and water cup apart under machine is spray.
It’s not allowed to put this machine in the over humidity environment to work, for example: bath
room etc.
It’s not allowed working under projective sunshine, otherwise will cause many kind of unsteady
conditions.
If there’s any exceptional problem, please contact the agency to let professional maintainer to
repair instead of opening the host machine cover to repair by you.
If power cord is destroyed, it’s better to choose the accessories from the original factory. It’s not
allowed to repair by un-professional personnel; you should go to appointed repair agency to
change.
Before turn on the power of the host machine, please confirm the water cup was screwed down,
the water level was between the highest and lowest water level mark, and the herbal medicine
cover was covered well in the water hole.
If there’s needed to add essential oil under working condition, pleas all it after pause the mist
spray.
If there’s needed to add herbal medicine package during spray, it has to stop mist spray for one
minute to open herbal cover. Please open the herbal medicine cover one minute after stop the
mist spray.
It must be clean the cotton pallet in the essential oil base and the herbal medicine package in
the herbal medicine net after stop using aromatherapy or herbal spray everyday.
It has to wait the mist came out from the spray hole
steady and well-proportionally before facial spray.
The spray hole is 40cm away from customer’s face and
spray steam should be from customer’s chin to whole
face proportionally to avoid scald the customer’s face due
to hot spray steam.
Ozone has sterilization effect, but it also will harm skin
and destroy nutrients of herbal, so it’s important to select
suitable time for different skin type when using.
It’s not allowed to take water cup apart when just finish using spray otherwise will cause scald.
Please wait water cup cold then take it apart.
It’s necessary to avoid over adding water, otherwise it’s not only make bad effect to the host
machine, but also may cause the problem of leakage of electricity
If there’re problems of water leakage and gas leakage happen underneath the host machine or
at the herbal medicine cover, remember cut off the power of host machine first and then check
whether the water cup or herbal medicine cover well assembled. If the problems still don’t be
solved, please contact local agency for further
Solution:
It should have good ground connection for the power plug of host machine.
if water level under lowest mark without adding water, the temperature protection system will
react right away to cut off the power temporarily. At this time should add amount of water in
time, otherwise temperature protection system would cut power again and again until burnout
the heating system. The host machine will return to normal working condition after adding water
for 1-3 minutes.
Attention
WARNING

4
Packing list:
Item Product Description QTY
Item Product Description QTY
Host machine 1 Herbal
Cover 1
Roof (magnifying
glass bracket)
components
1 Belt brake
casters
2
Roof 1
Without
belt brake
casters
2
17# open spanner
1 M10 Allen
wrench
1
Φ10 Spring
gasket 3 19# open spanner 1
Φ10 flat gasket 3 Φ12 Spring
gasket 4
M10×25 Hex
cylinder head
machine silk
6 Φ12 flat
gasket 8
power wire 1 M12 Cover 4
Instruction
Manual 1

5
Steamer Structure Description
1.Spray Arm Groups 2.Host machine 3.Roof (magnifying glass bracket) components
4.column 5.Standing
Spray Arm Groups
1.Essential oil base 2.Essence oil Cotton 3.Steam Output 4.Spray Arm
Host machine Description

6
1.Herbal Net 2.Add enough water to cover 3.LED Lamp with 4.Water Cup
5.Hot Handle 6.Control Panel 7.Spray arms ring 8.Starter
9.Insurance header 10.Hot plate operative ring 11.Hot plate
12.The power input socket 13.Filler 14.Herbal base
Host machine Description：
1.10×20 Hex cylinder head machine silk 2.Aluminum pillar 3.M12 Cover
4.Φ12 flat gasket 5.Φ12 spring washer 6.Belt brake casters
7.without Belt brake casters 8.Φ10 flat gasket 9.Φ10 spring washer
10.Bottom plate 11.Roof (magnifying glass bracket) components
Assembly Instruction：
components (attachment)

7
install the casters to the Standing: First, put the casters on φ12 spring washer, φ12 flat gasket,
then insert into the base plate (pay attention to that the belt brake casters installed in the front
and put a φ12 flat gasket after tighten M12 cover up . While tighten the cover up, please use
17# open-end spanner to fix the nut at the bottom of the floor, then tighten the cover up with 19#
open-end spanner.
Install aluminum pillar: fit the Aluminum pillar to the three holds on bottom plate, then connect
with M10×20 M10×20 Hex cylinder head machine silk, then tighten up screws with M10 allen
wrench.
Install the roof (magnifying glass) components: fit the Aluminum pillar to the three holes on
bottom plate, then connect with M10×20 M10×20 Hex cylinder head machine silk, then tighten
up screws with M10 allen wrench.
install the sprayer At first you should put the host machine horizontally to the hole of the column
until the column falling down 15 mm naturally.

8
Sprayer panel Instruction
1.Working Window 2.Time Decreasing Key 3.Adjust Energy Key 4.Time Increasing Key
5.Warming Vapor Start Key 6.Ozone Star Key 7.Power
Working window Instruction
1.water cup working display area 2.warning display area 3.ozone working display area
4.energy display area 5.time display area

9
Usage Instruction
unlock instruction of Spray arm
When you take out the machine, spray arm is locked. Now you should hold the spray arm
and pull out by your hand, rotate the spray arm until to the horizontal position to unlock.
Spray arm and spray nozzle adjustment instruction
With unique design spray arm for multi-angle adjustment to adapt different environment. As the
follow picture 1 the Spray arm can adjust right and left 150 degrees. As the follow picture 2 the
shower nozzle can adjust 360 degrees. Pay attention not to adjust too hard.
add water to the host machine:
Please lift up the cover, put water to the water cup.
Water level should not beyond the between the water scale line

10
Add perfume essence oil
You should unplug the essential oil base, add perfume essence oil with dropper into the cotton
(one to two drops is OK). (Picture at right)
You can change cotton with a tweezer.
Install and remove water cup:
Please turn down the power of the host machine before assembling the water cup, push down
the hot plate operative ring by one hand, and hold the water cup handle by other hand, then
push the water cup back to the hot machine.
Control panel operation instruction
Plug the power plug.
Press the button to turn on the host machine, the screen show the welcome menu, enter the
language selection screen, then press or button to choose the language.
The host machine will enter the standby mode, Default time display window show “15”
minutes .Energy display window show maximum level“Ozone “display area show
“”symbol dark grey, The symbol of Water cup “ ”is fixed.
Hot vapor function:
Press WARMING/VAPOR to turn on the hot vapor function, the display screen show
the hot vapor working status” ”, the hot machine enter the hot vapor working status; in

11
about 6 minutes, the steamer will come out
Temperature reservation function
Press WARMING/VAPOR to turn on the temperature reservation function, the display
screen show the temperature reservation function working status” ”, the hot machine
enter the temperature reservation function working status
Time adjustment
Press or to adjust the time.
When hot vapor turn on, the time adjustment range is 1-30 minutes, the default time is 15
minutes( )When temperature reservation function turn on , the time adjustment range
is 1-90 minutes, the default time is 15 minutes
Energy adjustment
choose the energy adjustment button to adjust the energy. There are three choice for
vapor volume, such as high ,medium and low
When the energy indication on the energy is highest
When the energy indication off the energy is lowest
Please choose the highest energy before the vapor come out ,then adjustment the energy to
suitable level.
Turn on the Ozone function
Press the to turn on the Ozone function, the Ozone symbol of ozone indication area are
blue, when the ozone working.There are ozone smell with the vapor
Water level alarm system
The water level detection system work during the hot vapor or temperature reservation
system on, when the water stay in the normal status ,the host machine heat continuously ;when the
water level beyond the lowest water level, the host machine will turn off the heating. And the symbol
of the display window will twinkle all the time
And the buzzer sounds the alarm with “Dee Dee” and lock all the button except the “ ‘ button
until the water level back to normal status and stop the buzzer and release button to restart the
‘’WARMING/VAPOR” function.

12
Maintenance
-- Clean heating groups one time every week. (Tips: Mix some acetic acid or citric acid
with water to the water cup for washing, after heating for one minute then using clean
water to wash heating tube.)
-- Pay attention to the water level of the water cup frequently.
-- Cleaning the machine after using, avoid accumulation by beauty leftover.
Specifications and Technical Data:
Product Name
Micro-Computer Fragrance herbs Facial steamer
Item No.
H1108
Function
Ion spray Facial Steamer
Rated Voltage/Power
AC. 100-120V/750W AC. 220-240V/800W
Working Frequency
50/60HZ
Dimension
89X41X32.5CM
N.W
17KG