Directed Xpresskit DBALL2 User manual

®Infiniti and Nissan their respective companiesare registered trademarks and property of .
SmartStart Compatible
SmartStart is equipped with D2D which means it can be connected to an interface module and used in, Remote
Start Ready ( ) mode the use of See the section for moreRSR without a remote starter. Module Programming
information.
Installation Guide
Update Alert: Firmware updates are posted the web on a regular basis. We recommendon
that you check for firmware and/or install guide updates prior to installing this product.
Index
Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Remote Start Ready ( ) is a function that enables the interface module to remote start the vehicleRSR
completely on its own. Consequently, there is no need for an aftermarket or an remote starter in order toOEM
start the vehicle from a distance.
Important!
This product is compatible with vehicles equipped with a manual transmission.NOT
The T firmware for 2 is an all-in-one door lock and override module compatible withNISS3H DBALL
specific Infiniti, and Nissan vehicles. This guide supports the installation of a 2 in Remote StartDBALL
Ready ( ) mode THNISS3/THNISS3D o . ThisRSR with or without a Plug & Play T-Harness ( ptional)
solution offers three (3) configuration options to control your system: 3x Lock Remote StartOEM
Activation, System or SmartStart (all sold separately).RF
This module can only be flashed and configured using Xpress at www.directechs.com or using the DirectechsVIP
Mobile application for smartphones. Refer to for more information.
the Module Programming section 11on page
Vehicle Application Guide .....................................................................................................................................................02
Installation s s(Wiring Diagram & Vehicle Wiring Reference Chart )
Type 1 Wiring Diagram T-Harness THNISS3/THNISS3D .............................................................................................03with
Type 1 Wiring Diagram without T-Harness ...........................................................................................................................04
Type 2 Wiring Diagram without T-Harness ...........................................................................................................................08
SmartStart/XL202 Installation Notes.....................................................................................................................................10
Module Programming
Module Programming............................................................................................................................................................11
Module Reset........................................................................................................................................................................13
Hard ............................................................................................................................................................................13Reset
Feature & Option List............................................................................................................................................................14
Feature Programming...........................................................................................................................................................14
LED Diagnostics & Troubleshooting.....................................................................................................................................15
Parking Light Error Codes ....................................................................................................................................................17
Limited One-Year Consumer .................................................................................................................................18Warranty
Quick Reference Guide ........................................................................................................................................................19

The following table lists the vehicles and features which are compatible with this product. The number assigned to each
year allows you to determine which installation type should be used for your vehicle.
Vehicle Application Guide Page 2
Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Vehicles
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
PK-Immobilizer Bypass-Data No Key Req'd
AV-Parking Lights Control
DL-Trunk / Hatch Release
FOB-Control of aftermarket alarm with OEM remote
RS-3x LOCK START (Start control using OEM Remote)
RS-3x LOCK STOP (Stop control using OEM Remote)
RS-RAP Shut Down (Retained ACC Power)
RS-Remote Start Ready
RS-SmartStart
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Hood Pin
SS-Entry Monitoring Trunk/Hatch Pin
ST-Brake Status (foot brake)
ST-Door Locks Status
Infiniti
EX35(SmartKey) 11111 •••••••••••••••
EX37(SmartKey) 11111 • • •••••••••••••
FX35(SmartKey) 1111 •••••••••••••••
FX50(SmartKey) 11111 • • •••••••••••••
G25(SmartKey) 11 •••••••••••••••
G35 (Smart Key) 11 ••••• •••••••••
G37(SmartKey) 111111 • • •••••••••••••
M35 (Smart Key)
[1]
22222• • •••••••••••••
Q60(SmartKey) 11 •••••••••••••••
QX50(SmartKey) 1111 • • •••••••••••••
QX70(SmartKey) 1111 • • •••••••••••••
Ni ssa n
370Z (Smart Key) 11111111 • • •••••••••••••
Altima(SmartKey) 1111 •••••••••••••••
Altima(SmartKey) 11 ••••• •••••••••
Altima Coupe (Smart Key) 1 • • •••••••••••••
GT-R(SmartKey) 11111 • • •••••••••••••
Maxima(SmartKey) 111111 • • •••••••••••••
Murano(SmartKey) 111111 • • •••••••••••••
Legend:
AV: Horn & Lights Controls RS: Remote Start & Engine Controls
DL: OE Door Lock & Alarm Controls SS: Integrated Security & Monitoring
FOB: Sync CAN Interface w/ FOB Remote ST: Function/Feature Status
PK: Transponder & Immobilizer Override
[1] Special programming required (see Module Programming section). It is also NOT COMPATIBLE with the optional T-harness THNISS3/THNISS3D.

Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Remote Start Safety
Override Switch
Hood Pin
Note: hood pin only
required on vehicle nots
equipped with a factory
hood pin.
White/Black
Important!
- The Remote Start Safety Override Switch safety devices, but supplied with the .Hood Pin and are mandatory are NOT DBALL
- Always connect OBDII connector all other connections.BEFORE
- Parking light Feature & Option Listoutput be controlled through data when using T-Harness, see section to enable this feature.MUST
Brake Pedal
OR
You can connect to
either a 202XL
RFTD OR
a SmartStart module.
Refer to the
SmartStart/ 202XL
Installation Notes for
more information.
(-) Push-To-Start Output: Green/Black
NOT USED
T-02 T-02
T-01 T-01
(-) Output:RAP Off Red/Black
Refer to the
Vehicle
wiring
reference
Chart.
Key Port connector
13
8
2
756
4
(-) Push-To-Start: pin 4
Push-to-Start
(Brown conn, at
Push-to-Start switch)
OBDII
16-pinDiagnostic Connector
(connector side view)
16
8
9
1
Connectors andT-01
T-02 (each pair has
one male and one
female) are NOT
interchangeable, thus
you will be able to
connect theONLY
correct connectors.
NOT USED
B-01 B-02
T-Harness
3/THNISS
3DTHNISS
Page 3
10
2DBALL
RF
Prog. Button
LED
4
14 12
2

Page 4
HS CAN High: 3Tan/Black:
HS CAN High: pin 6
HS CAN Low: pin 14
HS CAN Low: 4Tan:
Immo. Interr.Data (Vehicle side): 8Yellow:
Immo. Interr. conn.Data ( side): 9Orange/Yellow:
(-) Ground: 14Black:
(+) 12V Input: 13Red:(+) 12V
Push-to-Start
(Brown conn. at Push-to-Start switch)
(-) Push-to-Start: pin 4
Immo. Output .Data (veh side): 11Orange Black/:
Immo. Clock Output: 10Yellow/Black:
(+) Brake OutputActivation : 6Gray:
Diagnostic Conn. OBDII
(connector side view)
18
169
(+) OutputKeysense : 7Gray/Black:
(-) OutputRAP Off : 4Red/Black:
(-) Push-To-Start Output: 2Green/ :Black
Important!
The Remote Start Safety Override Switch safety devices, but supplied with the .Hood Pin and are mandatory are NOT DBALL
Refer to the Vehicle
wiring reference Chart.
Hood Pin
Remote Start Safety
Override Switch
6: White/Black: (-) Hood
With the exception of the Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise).OBDII s
Type 1 Wiring Diagram without T-Harness
10
2DBALL
RF
Prog. Button
LED
4
14 12
2
Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
CUT
30
86 85
87
87a
(+) 12 (fused)V
13
8
2
756
4
Key Port connector
(+) Keysense: pin 11
1
7
3
9
5
11
2
8
4
10
6
12
Clock: pin 2
Data: pin 3
32
20 19 18 17 16 15 14 13 12 11 10987654321
40 39 38 37 36 35 34 33 31 30 29 28 27 26 25 24 23 22 21
BCM conn.
(Green connector in passenger kick panel or behind cluster)
: insert pin if wire is not presentNote
(-) Driver Door Trigger (RAP Off): pin 39
You can connect to either
a 202XL RFTD OR
a SmartStart module.
Refer to the
SmartStart/XL202
Installation Notes for more
information.
Note: The installation of an
aftermarket hood pin (sold
separately) is only required
on vehicle not equipped
with a factory hood pin.
Clock, Data & Keysense
(white conn. at key port)

Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Page 5
Type 1 - Vehicle Wiring Reference ChartType 1 - Vehicle Wiring Reference Chart
Function Color Pin Polarity Location Color Pins
Infiniti EX35 (Smart Key) 2008-2012
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Brown 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Green 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti EX37 (Smart Key) 2009-2013
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Brown 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Green 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti FX35 (Smart Key) 2009-2012
Push-To-Start Lt. Blue 4 (-) PTS Connector. Brown 8
Keysense Brown 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti FX50 (Smart Key) 2009-2013
Push-To-Start Lt. Blue 4 (-) PTS Connector. Brown 8
Keysense Brown 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti G25 (Smart Key) 2011-2012
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Lt. Blue 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti G35 (Smart Key) 2007-2008
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Lt. Blue 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray or Red 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Wire Information
Connector Information

Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Page 6
Type 1 - Vehicle Wiring Reference Chart
Function Color Pin Polarity Location Color Pins
Infiniti G37 (Smart Key) 2008-2013
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Lt. Blue 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray or Red 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti Q60 (Smart Key) 2014-201515
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Lt. Blue 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray or Red 39 (-) BCM in passenger kick panel. Green 40
Brake Violet 2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti QX50 (Smart Key) 2014-2017
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Brown 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Green 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Infiniti QX70 (Smart Key) 2014-2017
Push-To-Start Lt. Blue 4 (-) PTS Connector. Brown 8
Keysense Brown 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Nissan 370Z (Smart Key) 2009-2016
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Red or Lt. Blue 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data White 3 Data Key Port Connector. White 12
Driver Door Trigger Gray or Red 39 (-) BCM in passenger kick panel. Green 40
Brake White 2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Nissan Altima (Smart Key) 2009-2012, Nissan Altima Coupe (Smart Key) 2013
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Yellow 11 (+) Key Port Connector. White 12
Clock Green/Orange 2 Data Key Port Connector. White 12
Data Orange 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Blue 39 (-) BCM behind instrument cluster. Green 40
Brake
Lt. Green or Red/Gre
2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Wire Information
Connector Information

Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Page 7
Type 1 - Vehicle Wiring Reference Chart
Function Color Pin Polarity Location Color Pins
Nissan Altima (Smart Key) 2007-2008
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Yellow 11 (+) Key Port Connector. White 12
Clock Green/Orange 2 Data Key Port Connector. White 12
Data Orange 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Blue 39 (-) BCM behind instrument cluster. Green 40
Brake Lt. Green or Red/Green 2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Nissan Altima (Smart Key) 2009-2012, Nissan Altima Coupe (Smart Key) 2013
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Yellow 11 (+) Key Port Connector. White 12
Clock Green/Orange 2 Data Key Port Connector. White 12
Data Orange 3 Data Key Port Connector. White 12
Brake Orange/Blue or Lt. Green 2 (+) Brake Switch White 4
Driver Door Trigger Lt. Blue 39 (-) BCM behind instrument cluster. Green 40
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Nissan GT-R (Smart Key) 2009-2013
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Red 11 (+) Key Port Connector. White 12
Clock Gray 2 Data Key Port Connector. White 12
Data Blue 3 Data Key Port Connector. White 12
Driver Door Trigger Gray 39 (-) BCM passenger kick panel. Green 40
Brake White 2 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Nissan Maxima (Smart Key) 2009-2014
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Yellow 11 (+) Key Port Connector. White 12
Clock Green/Orange 2 Data Key Port Connector. White 12
Data Orange 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Blue 39 (-) BCM behind instrument cluster. Green 40
Brake Lt. Green 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII). White 16
Nissan Murano (Smart Key) 2009-2014
Push-To-Start Brown 4 (-) PTS Connector. Brown 8
Keysense Yellow 11 (+) Key Port Connector. White 12
Clock Lt. Blue 2 Data Key Port Connector. White 12
Data Orange 3 Data Key Port Connector. White 12
Driver Door Trigger Lt. Blue 39 (-) BCM behind instrument cluster. Green 40
Brake Lt. Green 2 or 4 (+) Brake Switch. White 4
HS CAN High Blue 6 Data Diagnostic Conn (OBDII). White 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII) White 16
Wire Information
Connector Information

Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Page 8
HS CAN High: 3Tan/Black:
HS CAN High: pin 6Blue,
HS CAN Low: pin 14Pink,
HS CAN Low: 4Tan:
Immo. Interr.Data (Vehicle side): 8Yellow:
Immo. Interr. conn.Data ( side): 9Orange/Yellow:
(+) Parking Lights Output 12: Brown/Red:
(-) Ground: 14Black:
(+) 12V: 13Red:
Push-to-Start
(Brown conn. at Push-to-Start switch)
(-) Push-to-Start:
Brown/White, pin 4
(+) 12V: pin 1Red,
Immo. Output .Data (veh side): 11Orange Black/:
Immo. Clock Output: 10Yellow/Black:
(+) Brake OutputActivation : 6Gray:
Diagnostic Conn. OBDII
(connector side view)
18
169
(+) OutputKeysense : 7Gray/Black:
(-) OutputRAP Off : 4Red/Black:
(-) Push-To-Start Output: 2Green/ :Black
[1] (-) Unlock Output: 1Black/White:
[1] (-) Lock Output: 3Green/White:
Refer to the Vehicle wiring
reference Chart.
Hood Pin
Remote Start Safety
Override Switch
6: White/Black: (-) Hood
You can connect to either
a 202XL RFTD OR
a SmartStart module.
Refer to the SmartStart/ 202XL
Installation Notes for more
information.
10
2DBALL
RF
Prog. Button
LED
4
14 12
2
30
86 85
87
87a
(+) 12 (fused)V
13
8
2
756
4
(+) Keysense: pin 2Brown/Yellow,
Clock: pin 7Gray,
Data: pin 6White/Red,
Type 2 Wiring Diagram without T-Harness
1
568
234
7
(-) Driver Door Trigger (RAP Off): pin 7Violet,
BCM
(White 15-pin connector)
Insert pin if wire is not presentNote:
1
10 11 12 13 14 15
23456789
30
86 85
87
87a
(+) 12 (fused)V
If the door locks and OEM
alarm are not controlled by
data, make these wired
connections.
See feature 5 & 6 in
Feature and Option List
section.
[1] These wires are optional connections and are only required if features ‘OEM Security Disarm on Data’ & ‘Door Lock Control On Data’ are disabled.
See section.Feature & Option List
CUT
1
2
(+) 12V Input: 11Yellow/Red:
Circuit breaker
(White conn. behind
data link conn.)
Clock, Data & Keysense
(white conn. at key port)

Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Type 2 - Vehicle Wiring Reference Chart
Function Color Pin Polarity Location Color Pins
Infiniti M35 (Smart Key) 2006-2010
Push-To-Start Brown/White 4 (-) PTS Connector. Brown 8
Keysense Brown/Yellow 2 (+) Key Port Connector. White 8
Clock Gray 7 Data Key Port Connector. White 8
Data White/Red 6 Data Key Port Connector. White 8
Brake Pink/Blue 2 (+) Brake Switch. White 4
Driver Door Trigger Violet 7 (-) BCM behind glove box. White 15
Lock (Empty pin) 5 (-) BCM behind glove box. White 15
Unlock (Empty pin) 6 (-) BCM behind glove box. White 15
Parking Lights Red/Blue 1 (+) Dimmer Switch. White 3
HS CAN High Blue 6 Data Diagnostic Conn (OBDII) Black 16
HS CAN Low Pink 14 Data Diagnostic Conn (OBDII) Black 16
12V Red 1 (+) Circuit breaker behind Diagnostic Conn. White 2
Wire Information
Connector Information
Page 9

The 202 and antenna are not included and be purchased separately.optional XL MUST
Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information.PKE
4
4
XL202
Antenna
XOVER
SmartStart is and not included. It be purchased separately.optional MUST
SmartStart is and not included. It be purchased separately.optional MUST
Configuration Wires (Gray & White)
Connect Gray wire to (-) Ground
5 pins
D2D (4 pins, white)
4 pins
2 pins,
not used
CABLE
CABLE
The modules must be connected in a specific order. Refer to the section for more information.Module Programming
1. Use the D2D Crossover ( ) cable that is provided with 202, and the one in the package.XOVER XL NOT DBALL
2. The modules must be connected in a specific order. Refer to the section for more information.Module Programming
The modules must be connected in a specific order. Refer to the section for more information.Module Programming
SmartStart/ 202 Installation NotesXL
SmartStart Revision B
RF Kit
RF PKE& CombinationKit
Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information.PKE
RF PKE BT, & SmartStart CombinationKit
SmartStart Revision A
2DBALL
DBALL2
2DBALL LED
Prog.
Button
D2D (4 pins, white)
4 pins
2 pins,
not used
OR
SmartStart
Configuration Wires (White & Brown or Blue)
Cut Brown or Blue Loop
LED
THIS SIDE UP
LED
Page 10
Rev.: 20170817
Platform: DBALL2
Firmware: NISS3HT Remote Start Ready Installation(RSR)
© 2017 Directed. All rights reserved.
Th solution offers three (3) configuration options to control your system; 3x Locke Remote Start Ready ( )DBALL RSR OEM
Remote Start Activation, Kit or SmartStart (all sold separately).RF s This section provides specific installation information for
SmartStart and 202.XL