DirekTronik 125-0492 User manual

Operating Instructions
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to
clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service
personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in
performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described
in these operating instructions. Refer all other servicing to authorized servicing
personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts
specified by the manufacturer or parts that have the same characteristics as the
original parts. Unauthorized substitutes may result in fire, electric shock, or other
hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety
checks to confirm that the unit is in proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or
workmanship, our Company (referred to as "the warrantor" ) will, for the length of
the period indicated as below, (Parts(2)Year, Labor(90) Days) which starts with
the date of original purchase ("Limited Warranty period"), at its option either(a)
repair your product with new or refurbished parts, or (b) replace it with a new of a
refurbished product. The decision to repair or replace will be made by the
warrantor.During the "Labor" Limited Warranty period there will be no charge for
labor. During the "Parts" warranty period, there will be no charge for parts. You
must mail-in your product during the warranty period. This Limited Warranty is
extended only to the original purchaser and only covers product purchased as new.
A purchase receipt or other proof of original purchase date is required for Limited
Warranty service.
MAIL-IN SERVICE
When shipping the unit carefully pack and send it prepaid, adequately insured and
preferably in the original carton. Include a letter detailing the complaint and
provide a day time phone and/or email address where you can be reached.
4
Operating Instructions
SDI to HDMI Converter, With 1xlooping SDI output
Model: SX-SDH1B
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
FEATURES
Convert SD/HD/3G-SDI to HDMI
Distribute 1 SD/HD/3G-SDI to 1 HDMI plus 1 looping SDI output
simultaneously
Support SDI input resolutions:
1080p (50/60/59.94/30/29.97/24/23.98Hz)
1080i (60/59.94Hz), 720p (60/59.94/50Hz), 576i (50Hz), 480i (60/59.94Hz)
Work with SX-HSD1/HSD2 to cascade many layers
Support transmission distance up to 100m over RG59 cable
With mounting ears
①SX-HSD1/SX-HSD2 is HDMI to SDI converter
NOTICE
Our company reserves the right to make changes in the hardware, packaging
and any accompanying documentation without prior written notice.
1
1
125-0492
125-0492

Operating Instructions
TABLE OF CONTENTS
Specifications
Package Contents
Panel Descriptions
Connecting and Operating
Maintenance
Product service
Warranty
SPECIFICATIONS
Operating Temperature
Range
-5 to +35℃(+23 to +95℉)
Operating Humidity
Range
5 to 90%RH (No Condensation)
Resolutions Formats
1080p@23.98/24/25/29.97/30/50/59.94/60HZ;
1080i@50/59.94/60HZ;
720P@50/59.94/60HZ;
576i @50HZ;
480i@59.94/60HZ
SDI Standard
3G-SDI/HD-SDI/SDI
Input
1x SDI(BNC)
Output
1x SDI(BNC) , 1x HDMI ( Standard Type A connect
Output Impedance
75ohms
Power consumption
2.5watts(Maximum)
Dimension (L×W×H)
95x95x29mm
Net Weight
245g
Note: Specifications are subject to change without notice. Mass and
dimensions are approximate.
PACKING CONTENTS
1) Main Unit. SDI-HDMI converter
2) DC5V 1A Power Supply.
3) Operating Instructions
2
Operating Instructions
PANEL DESCRIPTIONS
Input Panel Output Panel
1) Indicator of HDMI Output
2) Indicator of power Input
3) SDI input port
4) SDI output port
5) HDMI output port
6) Power input
Connecting and Operating
1. Ensure the Converter is disconnected from power.
2. Connect source to the SDI input and sink to HDMI output and SDI output.
3. Connect 5VDC power to the converter.
Attention: Insert/Extract cable gently
Typical Application
3