Discovery Telecom 0205 User manual

SAFETY FIRST !!!!!
Discovery
World Furniture
TM
2963 Stonewall Road
Sanford, Fl 32773
Website www.discoveryworldfurniture.com
SAFETY WARNINGS
STRANGULATION HAZARD
All of Discovery’s Bunk beds were designed and manufactured with your child’s safety as our top priority. Their
unparalleled strength is a bi-product of the safety design. Our bunk beds comply with all the ASTM F 1427-13
“Standard Consumer Safety Specification for Bunk Beds” and code of Federal Regulations (CFR) 1213 “Safety Standards
for Entrapment Hazards in Bunk Beds” and (CFR) 1513 “Requirements for Bunk Beds”.
Safety is a cooperative effort between us as the manufacturer, and as a guardian. Please read and consider the warnings listed
below when choosing a mattress and discussing rules of use with your child.
1. Follow the information on the warning labels appearing on the upper bunk end structure and on the carton.
Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches (127mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on top bunk.
6. Periodically, check and ensure that the guardrail, ladder , and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for child using the upper bunk.
11. Always use guardrails on both long side of the upper bunk. If bunk bed will be place next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and the wall.
12. The use of water or flotation mattress is prohibited.
13. Keep these instructions for future reference.
-Never attach or hang items to any part of the bunk bed that are not designed
for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
******Replacement parts, including additional guardrails, may be obtained from any
Discovery World Furniture dealer or directly from us at the below address.
SIZE OF MATTRESS AND FOUNDATION
Use only Twin or Full Mattress with the following specifications on upper & lower bunks
Twin Mattress :37 1/2” - 38 1/2” Wide x 74”-75” long
Full Mattress :52 1/2” - 53 1/2” Wide x 74”-75” long
Ensure thickness of mattress and foundation combined does not exceed 9 inches and the mattress is
at least 5 inches below the upper edge of guard rails.
Twin/Full Student Loft Bunk Bed (Metal Slats)
(White) (Espresso) (Charcoal)
0205 2905R 3205

0205 2905R 3205
Replacement Parts & Limited Lifetime Warranty
Discovery World Furniture will replace any component part free of charge for 1 full year via UPS freight collect. In
addition, Discovery World Furniture will replace any component part for 50% of the then prevailing retail price plus
freight for the lifetime of the product, unless the product has been discontinued from our line. For service, mail
your request to: Discovery World Furniture 2963 Stonewall Place, Sanford, FI 32773.
Website www.discoveryworldfurniture.com
AG
B
C
D
E
F
16
10
01
1/4”x 4 1/4”
2” 14
02
16
1/4”x 4” H
I
L
J
K
1 9/16”
1 1/4”
08
01
04
04
03
02
1/4”x 2”
1/4” 1 1/2”
Requires a phillips screw driver not included
Allen Wrench
Allen bit
Half moon nut
Shelf pin
(White) (Espresso) (Charcoal)

14
18
6
6
9
9
Center Support
10
10
12
13
22 23
17
16
15 17
17
17
17
19
20
21
11
Chest Shell
Without drawers
8
4
2
1
3
3
5
7
Back Rail
Drawer

3
3
4
E
E
E
E
E
E
E
E
E
E
E
E
E
E
Use guardrails on both sides of upper bunk.
6
6

8
D
D
1
4
3
3
1
2
B
B
B
B
B
B
2
D
Useguardrails on both sides of upper bunk.
Front bed post
Front bed post
Back bed post
Back bed post
Find knobs in top drawer
“Please ensure that the warning label faces the inside of the bed."
Allen Wrench

3
4
13
5
23
F
F
Useguardrailson both sides of upper bunk.
Useguardrailson both sides of upper bunk.
Repeat step on all 4 corners
7
H
H
A
A
A
A
A
A
A
B
B
B
B
A
J
J
J
J
H
Install front guard rail
Install rails & back guard rail
Install guard rail support
“Please ensure that the warning label faces the inside of the bed."
Allen Wrench
Allen Wrench
Assemble front guard rail (Instructions and hardware in box5)

5
6
C
C
Find these screws in slat box.
Install slat kit
Attach bed to the chest
Install shelves
K
Always start here
Useguardrailson both sides of upper bunk.
10
10

7
8
F
F
I
Assemble the ladder (Instructions and hardware in box 5)
Assemble bottom bed
Attach ladder
Useguardrailson both sides of upper bunk.
I
I
II
6
9
9
6
A
A
A
A
A
A
A
A
Repeat step on all 4 corners
Allen Wrench

9
10
Screws in slat box.
Install slat kit
Install center support
Hold the center support under the slats, center it on the
bed and screw it on both sides using the screws supplied
Slide one tube into the other
Always start here

11
12
Useguardrailson both sides of upper bunk.
Useguardrailson both sides of upper bunk.
Shown with chest on the right side
Useguardrails on both sides of upper bunk.
“Please ensure that the warning label faces the inside of the bed."
“Please ensure that the warning label faces the inside of the bed."