Discovery Telecom 2914R-0214R User manual

All of Discovery's Bunkbeds were designed and manufactured with your child's safety as our top priority.
Their unparalleled strength is a bi-product of the safety design. Our bunks meet all compliance with
ASTM F 1427-13 “Standard Consumer Safety Specification for Bunk Beds” and Code of Federal
Regulations (CFR) 1213 “Safety Standards for Entrapment Hazards in Bunk Beds” and (CFR) 1513
“Requirements for Bunk Beds”.
Safety is a cooperative effort between us as the manufacturer, and you as a guardian. Please read and consider the
warnings listed below when choosing a mattress and discussing rules of use with your child.
SAFETY WARNINGS
1. Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches (127 mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on the upper bunk.
6. Periodically, check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a nightlight may provide added safety precaution for a child using the upper bunk.
11. Always use guardrails on both long sides of the upper bunk. If bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
12. The use of water or sleep flotation mattresses is prohibited.
13. Keep these instructions for future reference.
STRANGULATION HAZARD–Never attach or hang items to any part of the
bunk bed that are not designed for use with the bed; for example, but not
limited to, hooks, belts and jump ropes
SIZE OF MATTRESS AND FOUNDATION
Use only mattress, foundation and deck combined which is 74-75 inches long and 37 ½-
38 ½ inches wide on upper bunk. Ensure thickness of mattress and foundation combined
does not exceed 9 inches and mattress and is at least 5 inches below upper edge of
guardrails.
******Replacement parts, including additional guardrails, may be obtained from any
Discovery dealer or directly from us at the below address.
Replacement Parts & Limited Warranty
Discovery World Furniture will replace any component part free of charge for 1 full year via UPS freight collect.
Discovery World Furniture will replace any component part for 50% of the then prevailing retail price plus freight
for the lifetime of the product unless the product has been discontinued from our line. For service, mail your request to:
Discovery World Furniture 2963 Stonewall Place, Sanford, FL 32773. (WWW.discoveryworldfurniture.com)
2914R-0214R Mission Stair Stepper Bunk Bed
SAFETY FIRST !!!!!
Patent # US 7,832,031 B1
2963 Stonewall Place, Sanford, Fl 32773

H
I
J
04
01
10
K
1 1/4”
1 3/4”
3 1/2” x 3/8”
06
A
B
C
D
E
22
04
02
3 1/2”
4”
02
3 1/2”
3 1/2”
02
3 1/2”
F
01
Tool required
Phillips screw driver
01
Page
Stair Stepper Bed Left Side Facing
*For Right side facing go to page 08
( For use with power drill)

J
05
J
J
J
J
J
05
05 05
Handles and screws
in top drawer, install
them at any time
Top bed rails
Bottom bed rails
No dowel
on this side
No dowel
on this side
Page
Parts List
J 02
Page
08
03
13
09
15
16 17
10
18
12
05
05
05
05
07
07 08
06
01
11
06 02
Magazine Rack
Handles and screws
in chest’s top drawer

2
Remove shipping blocks
and save screws for
next step
Important note
If you want the Stair on the
right side please go to page 08
REMINDER
03
3
Back post Front post
10
09
12
B
B
B
E
E
E
E
B
E
E
E
E
Install tall posts
Back
Check stamp
under the post
Front
Tall posts located
in rail box #3
Check stamp
under the post
If you bought the Twin/Full version please open the extension kit box and
follow the instructions there before continuing
STOP STOP Page

4
Phillips head screw, use screw driver.
5
A
A
A
C
C
A
04
Page
A
A

6
7
05
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Install guard rail support
Setup Top Bed
No dowel
on this side
Always start
assembling slat
kit flush with cleat
F
F
F
F
F
F
Install Slat kit
(Screws in slat box)
Page

Drop Top Bed in Place
9
8
06
Always start
assembling slat
kit flush with cleat
K
K
K
K
K
Install Slat kit on bottom bed
(Screws in slat box)
Page
Install Back Panel
Use Phillips head
screw on this side
D
E
E
13
D
D

10
11
07
Page
Mount magazine
rack
F
F
F
F
OPTIONAL
Pre-Assembled 3 Drawer Unit,
Simply Slide Under The Bunk
Shown With Optional Full Extension Kit & Trundle

08
Page
To Install stair case on
the right side follow these steps
Remove both post and
transfer it to this side
Instal tall post Remove Drawers
Remove shipping block
Page
B
B
B
E
B
E
E

09
Remove Magazine Rack
Slide Chest out
Turn chest around
and slide it back in
Slide Drawers back in
AB
CD

10
Page
Setup top bed
Insert Magazine Rack
back in and screw it in place
Make sure that the
opening is on the right
side as shown
Install Slat kit
and guard rail
support
F
F
F
Both sides
Install slats
Always start
assembling slat
kit flush with cleat
E
Install Slat kit on bottom bed
(Screws in slat box)