2
DPH42 Installation Guide
Safety Information
Warning and Attention Symbols
You must be aware of safety when you install and use the DISH Pro Hybrid 42 Switch. This document provides
various procedures. If you perform some of these procedures carelessly, you could injure or kill yourself or damage
equipment or property. Other procedures that require special attention are indicated by the following symbols:
Indicates a procedure where the following may happen:
• Personal injury or death may occur.
• Equipment or property may be damaged.
Indicates the following issues:
• Important operation or maintenance instructions follow.
• Special attention is required.
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use the apparatus near water.
6 Clean the apparatus only with a dry cloth.
7 Do not block any ventilation openings on the apparatus.
8 Install the apparatus in accordance with the manufacturer’s instructions.
9 Do not install the apparatus near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
10 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, with
one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or
third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
11 Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
12 The power plug must be readily accessible so that equipment can be easily disconnected from the AC power.
13 Only use attachments/accessories specied by the manufacturer.
14 Unplug the apparatus during lightning storms or when unused for long periods of time.
15 Refer all servicing to authorized service personnel. Servicing is required when the apparatus has been damaged in
any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
16 The power inserter assembly shall not be exposed to dripping or splashing, and no objects lled with liquids, such
as vases, shall be placed on top of it.
WARNING: To reduce the risk of re or electric shock, do not expose the power inserter assembly to rain
or moisture.
