Displays2go RPHLTH User manual

1
Attach both Hand Sanitizer Holder and Wipe Holder to the body panel by
sliding key holes down onto the two bolts. Tighten the nuts on the back.
Attach both Glove Box Holder and Mask Holder to the body panel by
sliding key holes down onto the two bolts. Tighten the nuts on the back.
Thread standoffs through all 6 holes along edges. Thread bolts through any
holes in the body and attach nut to back side.
Health and Safety Panel (1)
Attach sign holder to the top of the body panel by sliding key holes down
onto the bolt. Tighten the nut on the back.
3
Standoffs (6)
Nuts and Bolts (9)
8.5” x 11” Sign Holder (1)
RPHLTH –Wall Mounted Health & Safety/Hygiene Station v21.05
Hand Sanitizer Holder (1)






2
Attach both Glove Box Holder and Mask Holder to the body panel by
sliding key holes down onto the two bolts. Tighten the nuts on the back.
Attach pocket by pinching in both sides of the pocket and pressing into the
holes in the back plate. Press down and click the pocket into place. Drop
dividers down into slots inside of the pocket.
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact D2g customer service at 844-221-3388.
-
Wipe Holder (1)
Glove Box Holder (1)
RPHLTH –Wall Mounted Health & Safety/Hygiene Station v21.05
5
6
Mask Holder (1)
Pocket (1)
Divider (3)
Scan QR code to visit
the product page: