Displays2go JTCPCS16D User manual

AssemblyAssembly
InstructionsInstructions
SKU: JTCPCS16DSKU: JTCPCS16D
PORTABLEPORTABLE
CHARGINGCHARGING
ENCLOSUREENCLOSURE

2
PARTS LIST
PART QUANTITY
A: Charging Trolley..........................................1
WARNING:
Make sure the AC power section (plug/
socket) does not get wet.
NOTE:
The appliance is applied to AC input voltage
range: 90-264 VAC; 50/60Hz.
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
TO CHARGE
1. Lie case flat. Unlock latches and open the
upper lid.
2. Plug AC power cord into the socket of the
external plate, as shown below.

3
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact Displays2go customer service at 844-221-3388.
3. Put mobile devices into slots and
connect them to the USB ports.
4. Power on the switch of the external
plate and start charging.
NOTE:
Red LED = charging
Green LED = fully charged
TO MOVE
1. Unplug and disconnect all of cords,
lines, and mobile devices.
2. Close the upper lid and lock latches.
NOTE: Locks not included.
3. Draw out the extractable handle and
move.
TO CLEAN
• Always unplug the charging trolley before you clean it.
• Clean surface with a soft damp cloth.
STORAGE
• Store charging trolley in the conditions of temperature -13°F—122°F
and relative humidity 20-90% RH noncondensing.
ENVIRONMENT
• Do not throw away the appliance as the normal household waste,
but hand them in at an official collection point for recycling. By
doing this, you help to preserve the environment.
Eny r w ptEny r w pt
arng eosur!arng eosur!
Scan QR code to visit
product page