DIVERSIFIED WOODCRAFTS 4741K User manual

4741K MICRO-MOBILE CABINET
ASSEMBLY INSTRUCTIONS

- 2 -
TABLE OF CONTENTS
PAGE
REVISIONS TABLE…………………………………………………………………………………………………………………….…………………..……….…………..……….…………………………………………..……………………………3
ASSEMBLY COMPONENTS…………………………………………………………………………………………………………………….…………………..……….……….…………….…………………………………………4
CASTER ASSEMBLY…………………………………………………………………………………….…………………..……….……………………………..……….…………………………………..……………………………………………5
DIVIDER ASSEMBLY…………………………………………………………………………………………………………………….…………………..……….…..……….…………….………………………..…………………………………5
TROUBLE SHOOTING_________________________________________________________6

- 3 -
ASSEMBLY COMPONENTS
ITEMS INCLUDED
PART #
PART #
ASSEMBLY INSTRUCTIONS
1-HARDWARE BOX
4-CASTER,4" SWIVEL TOP PLATE
100081
1 - ELECTRICAL EXTENSION CORD
100036
1 - CASTER HARDWARE BAG
206509
12-MICROSCOPE DIVIDERS
100995
***Please Refer to Ken-A-Vision’s #SCGNO9 Manual for operating instructions***
REV DESCRIPTION DATE INITIAL
---
Original Created
2-19-07
JWD
Hardware Updated
5-14-09
NAM

- 4 -
Assembly Instructions for
4741K MICRO-MOBILE CABINET
Items not included but needed for assembly:
1. ½”Wrench
2. Adjustable pliers
Instructions:
1. Attach the (4) 100081 4”SWIVEL TOP PLATE, W/BRAKE Casters into place using the (16) 100488
SCREW, ¼” - 20X1 ¼” SLOTTED FLAT, & the (16) 100483 NUT, ¼” - 20 HEX ZINC into the bottom of the
base as shown. Figure 1
Figure 1A Detail

- 5 -
2. Insert microscope dividers (100995) into pre-drilled holes as shown.
NOTE: Doors removed to show details. Figure 2
3. Clean top with water only.

- 6 -
Trouble Shooting Tip:
If the lights on the power distribution panel do not come on and run in sequence,
it is possible the power supply has become disconnected inside the unit. This can be checked by removing one of the
wood panels the power distribution panel is mounted on.