DIY Alaska Futon FDD 12 User manual

Before You Start
Important: Retain these instructions for future reference.
When you are ready to start, make sure that you have
the right tools, plenty of space and a clean, dry area for
assembly.
Unwrap all packaging materials and place the
components on top of the carton box or on a clean floor
to prevent it from scratching.
Check the pack and make sure you have all the parts
listed.
Tools not included.
Do not use power tools to construct this product.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Ensure that this product is fully assembled as illustrated
before use.
Warnings
This product is intended for a maximum weight of
85 kg for Top Base & 130 kg for Futon Base.
Do not exceed this weight.
It is recommended that 2 people are required to
assemble this product.
Do not stand on the product.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Check all screws or both are tightened and inspect
regularly.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not use this product if parts are missing, damage
or worn.
Do not allow children to jump on the bed as this could
cause damage to the frame.
Care Instructions
To clean wipe with a sponge and warm soapy water.
Do not use solvent based cleaners or
detergents as they can bleach or damage the product.
Never use scourers, abrasives or chemical cleaners.
D.I.Y. Instruction Sheet Model : Alaska Futon Bed
Hyder
4pcs.
With 20mm Hole
(One Side)
Bottom Post (L/R) Upper Post
4pcs.
Headboard Connector
4pcs.
Metal Plate
2pcs.
Armrest
2pcs.
Ladder Step
4pcs.
Headboard Frame
2pcs.
Futon Side Support
2pcs.
Futon Gear (Right) Futon Gear (Left)
1pc. 1pc.
Futon Seat (With Handle)
1pc.
Futon Rest
1pc.
Top Base
1pc.
Back Rail
1pc.
Front Rail (Left)
1pc. 1pc.
Front Rail (Right)
2pcs.
Ladder (Left & Right)
1pc.
Futon Support
4pcs.
A
M6 Steel Pin
19pcs.
B
M6 x 80mm JCBC Screw
4pcs.
C
M6 x 70mm JCBC Screw
4pcs.
D
M8 x 75mm JCBC Screw
8pcs.
E
Metal Square Insert Nut
8pcs.
F
M8 x 95mm JCBC Screw
12pcs.
G
M8 x 40mm JCBC Screw
12pcs.
H
M8 Spring Washer
12pcs.
I
M8 Nut
16pcs.
J
M6 x 16mm JCBC Screw
2pcs.
K
M6 x 40mm JCBC Screw
2pcs.
L
M6 Nut
6pcs.
M
M6 x 45mm JCBC Screw
4pcs.
N
M6 x 15mm JCN Nut
M4 - 2pcs.
M5 - 1pc.
M4 / M5 Allen Key
22112013(R-1) 1 of 4

D.I.Y. Instruction Sheet Model : Alaska Futon Bed
C
C
Sticker 'R'
Sticker 'L'
A
B
B
A
20mm Big Hole
Small
Allen Key
Big Allen
Key
Small
Allen
Key
DD
B
B
B
B
Step 1 Step 2 Step 3
Important:
Do not tighten the screws
yet before assemble the armrest (Step 2)
22112013(R-1) 2 of 4
Hole Hole
Hyder
Hole
Hole
E
E
E
F
F
F
Futon Support
E
F
Big Allen Key
Step 4
R
Big Allen
Key
G
G
H
H
I
I
Right
Futon
Gear
Step 5
2x 2x

D.I.Y. Instruction Sheet Model : Alaska Futon Bed
JJ
GG G G
I I I I
H
Big Allen Key
Futon
Seat
Futon
Back Rest
Step 6
Step 7
22112013(R-1) 3 of 4
Hyder
HHHHHH
DO NOT JUMP ON THIS BED
DO NOT use this bed if any parts
are missing, damaged or worn.
DO NOT use this bed unless all
fixings are tightly secured.
Periodically check all bolts, screw
& fixings to ensure they are
tightly secured.
Always use on a level and
even surface.
Be aware of the danger of young
children (under 6) falling from the
upper bunk. It is not advisable for
children under 6 years of age to
sleep on the top bunk.
Recommended thickness
of mattress is max 200mm.
Caution! Children might strangle
in items such as ropes, strings
cords harnesses & belt strings
attached to or hang on the
bunk bed.
Warning! Children can become
trapped between the bed & the
wall. To avoid risk of serious
injuries, please aware of the
distance between the top safety
barrier & the wall.
This bunk bed is comply to
EN 747 - 1 & 2 (2012)
01
02
03
04
05
06
07
08
09
10
IMPORTANT: HEALTY & SAFETY
HHH
Futon Seat
Top Base
Big Allen Key
E
F
Step 9
Small
Allen Key
Small
Allen
Key
M
N
Step 8
Do not secure the screw
yet before assembling
the Front Rail and
Back Rail (Step 10)
M
MM
NN

D.I.Y. Instruction Sheet Model : Alaska Futon Bed
Hyder
BB
BB
B
AA
B
Small
Allen
Key
B
B
B
Small
Allen
Key
Small
Allen
Key
Small
Allen
Key
CCB
Small
Allen Key
B
AA
Step 10
Step 11
Step 12
JJ
JJ
JJJJ
J
J
J
Note:
This ladder can be
assembled either on the
right or left hand side of the bed
J
HH
MM
LLL
KK
KKK
LLLMM
Ladder Step
JJ
J J
Sticker 'L'Sticker 'L'Sticker 'L'
Sticker 'R'
K
MM
Fix the Futon Support
into the holes
Step 13
Assembly
22112013(R-1) 4 of 4