System Build 2484412COM User manual

2484412COM
2 Door / 1 Drawer Base Cabinet
B342484412COM1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
For the latest information on SystemBuild products
follow us at Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com

Contact Us!
Helpful Hints
2
systembuild.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-866-452-4081
Monday-Friday
9am - 5pm CST
Visit systembuild.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
systembuild.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Tube
You
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
systembuild.com
Board Identification
Not actual size
Tube
You
Left Panel
32484412010 Right Panel 32484412020
Shelf
31117412030
Bottom
31117412040
A B
C
D
Adjustable Shelf
32484412060
Door (x2)
32484412070
F
G
Drawer Front
31117412080
H
Drawer Bottom
39991341052210D
I
Drawer Side (x2)
39991167346200C Drawer Back
39991167051390B
Back Panel
K736741200
This piece is paperboard construction.
It is not made from wood, but is
required for the assembly of your unit.
J
DWR
SIDE
DWR
BACK

5
systembuild.com
Board Identification
Not actual size
Tube
You
A
B
C
F
H
I
D
G
DWR
BACK
J
G
DWR
SIDE
DWR
SIDE

6
systembuild.com
Part List
Actual Size
Tube
You
Not Actual Size
12
3
4567
89
10 11
12
13
14
15 16
20c
17
18 19
21d
21c
21b
21a
(x4)
#A22610
cam bolt
(x4)
#A22620
cam lock
(x4)
#A21660
wood dowel
(x10)
#A11080
7/16" flat
head screw
(x10)
#A12120
7/16" round
head screw
(x2)
#A11160
5/8" flat
head screw
(x8)
#A12420
5/8" round
head screw
(x4)
#A12930
1-1/8" round
head screw
(x4)
#A23030
confirmat screw
(x2)
#A89020
bumper
(x34)
#A21110
nail
(x6)
#A17400
8-32 x 7/8"
(x4)
#A21970
drive fastener
(x4)
#A80250
shelf support
20b
20a
20d
(x3)
#A52395
handle
(x2)
#A54520
drawer bracket
(x4)
#A44140
foot
(x4)
#A65615
hinge
(x1)
#A54900
drawer brace
(x1)
#A84050
safety bracket kit
(x1)
#A56770
drawer slide kit
left cabinet member
right cabinet member
left drawer member
right drawer member

7
systembuild.com
STEP1
Tube
You
14
21a
(x2)
#A22610 (x3) #A11080 (x1)
#A56770
left cabinet member
marked with "L"
1
marked with "L"
21a
4
4
4
4
1
A
21a

8
systembuild.com
STEP2
Tube
You
1
4
21b
(x2)
#A22610 (x3)
#A11080
(x1)
#A56770
right cabinet member
marked with "R"
4
4
4
1
1
B
marked with "R"
4
21b
21b

9
systembuild.com
STEP3
Tube
You
23
20a
20b
Proper orientation of CAM LOCK
Tip
Assembly
Quick
2
2
3
3
(x4)
#A22620 (x4)
#A21660
(x1)
#A84050
Do not tighten screw.
20b
20a
2
2
3
3
C

10
systembuild.com
STEP4
Tube
You
67
8
10
19
(x2)
#A11160 (x8) #A12420 (x4)
#A12930 (x2)
#A89020
(x4)
#A44140
D
D
8
7
19
7
bottom surface
top surface
6
10
Unscrew the
two halves of
the foot.
Attach
bottom half to
bottom (D) and
screw top half
back on.

11
systembuild.com
STEP5
Tube
You
UNLOCKLOCK
All finished edges will face up.
C
A
B

12
systembuild.com
STEP6
Tube
You
C
A
B
D
9
9
9
9
9
All finished edges will face up.
(x4)
#A23030

13
systembuild.com
STEP7
Tube
You
(x34)
#A21110
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
"raw surface shown"
11
11
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
Flush the bottom edge of the back panel
with the bottom edge of the bottom (D).
J

14
systembuild.com
STEP8
Tube
You
12
15
(x4)
#A17400 (x2)
#A52395
(x4)
#A65615
x2
16
16
12
12
15
G
16

15
systembuild.com
STEP9
Tube
You
5
18
(x4)
#A12120 (x2)
#A54520
DWR
SIDE
5
55
5
18
18
DWR
SIDE
side view side view

16
systembuild.com
STEP10
Tube
You
5
Be sure the groove in the drawer sides are centered with the groove in the drawer front
.
(x4)
#A12120
5
5
DWR
SIDE
DWR
SIDE
H

17
systembuild.com
STEP11
Tube
You
DWR
SIDE
I
H
DWR
SIDE
finished surface

18
systembuild.com
STEP12
Tube
You
13
13
13
13
13
DWR
BACK
DWR
SIDE
I
H
DWR
SIDE
(x4)
#A21970
You will need to tap the drive fasteners (13)
lightly with a hammer to securely fasten.

19
systembuild.com
STEP13
Tube
You
4
12
15
21c
21d
(x4)
#A11080 (x2)
#A17400 (x1)
#A52395
(x1)
#A56770
right drawer member
left drawer member
DWR
BACK
DWR
SIDE
DWR
SIDE
12
12
H
21d
4
4
4
4
21c
15
Note: Attach slides (21c&21d) first then attach handle.

20
systembuild.com
STEP14
Tube
You
517
5
5
H
17
DWR
BACK
Turn drawer over. Using two screws (5), attach the drawer brace (17) as shown.
(x2)
#A12120
(x1)
#A54900