•Check you have all the components and tools listed on the following pages. Remove all ttings from the plastic bags
and separate them into their groups.
• Keep children and animals away from the work area. Small parts may cause a choking hazard.
•Dispose of all packaging carefully and responsibly.
•Place the product on at and steady surface during use.
•Assemble on a soft level surface to avoid damaging the unit or your oor.
• Keep these instructions for further use.
•Never allow anyone to sit on the foot end of the bed. Keep children well away from moving parts. If you have young
children in the home, always disconnect the power at the wall socket for extra safety.
•Never touch moving parts or any part of the equipment whilst in use - if something needs to be checked, disconnect
the power rst. The socket providing the power must be accessible at all times in case you need to switch o the
power quickly.
•All approved mains powered extension leads, used to power the equipment, must not be placed where they can be
walked on - this is dangerous and could lead to accidents.
•Do not expose the bed to an undue level of heat - keep away from radiators.
•Do not place any vessel containing liquids on the TV footboard or TV itself which may accidentally spill and cause
damage to your bed, the TV, the TV mount or your console
•Regularly inspect all cables for signs of damage.
•Do not touch any part of the cables, LEDs or switch with wet hands.
•Not suitable for use as main lighting in an indoor setting.
•Prevent eye damage by avoiding direct eye contact with the LEDs.
•Always disconnect the bed from the mains power before moving or cleaning it.
•If there is any sign of damage to the LEDs or components, please discontinue use and contact the manufacturer for
support.
•Do NOT clean the light system with detergents, abrasives or other aggressive substances.
•Do NOT use the light system near ammable, explosive or reactive substances.
•Only clean using a damp cloth and mild detergent, do no use bleach or abrasive cleaners.
•Regularly check and ensure that all bolts and ttings are tightened properly.
•To ensure an easier assembly we strongly advise that all ttings are only nger tightened during initial assembly.
Only upon completion of the assembly should all xing points be fully tightened.
•Make sure you have enough space to layout the parts before starting.
•Check you have all the components and tools listed on the following pages. Remove all ttings from the plastic bags
and separate them into their groups.
• Keep children and animals away from the work area. Small parts may cause a choking hazard.
•Dispose of all packaging carefully and responsibly.
•Place the product on at and steady surface during use.
•Assemble the item as close to its nal position in the same room) as possible
•Parts of the assembly will be easier with 2 people.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
