Home Styles Hall Tree 20050640049 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
20 05064 0049
Hall Tree
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
A.
Top
1 pc.
B.
Top Frame
1 pc.
C.
Shelf
1 pc.
F.
Post
1 pc.
G.
Post
1 pc.
H.
Post
1 pc.
I.
Post
1 pc.
J.
Side Frame
1 pc.
K.
Side Frame
1 pc.
L.
Post
4 pcs.
O.
Upright
7 pcs.
P.
Upright
7 pcs.
M.
Rail
2 pcs.
N.
Rail
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M3x16
Wood Screw
for Hook
8 pcs. (+1 extra)
M3x38
Wood Screw
2 pcs. (+1 extra)
M6x16
Tapered Bolt (short)
42 pcs. (+1 extra)
M6x32
Tapered Bolt
7 pcs. (+1 extra)
M6x16
Head Cap Bolt (short)
4 pcs. (+1 extra)
M6x12-12
Bolt
14 pcs. (+1 extra)
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
M6x90
Head Cap Bolt (long)
4 pcs. (+1 extra)
Q.
Hook
4 pcs.
M6x60
Tapered Bolt (long)
7 pcs. (+1 extra)
D.
Seat
1 pc.
E.
Shelf
1 pc.

Assembly Instructions 2/7
Figure 1
D
L
L
E
Tapered Bolt (short)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Seat (D) upside down on a soft cloth.
Attach Posts (L) to Seat (D) with Tapered Bolts (short), tightening bolts only halfway. (See Figure 1)
Attach Shelf (E) to unit with Tapered Bolts (short), tightening bolts only halfway.
STEP 2
Attach Post (L) to unit with Tapered Bolts (short), tightening bolts only halfway.
Tighten all bolts used in Steps 1 and 2.
Turn unit over to it’s upright position.
L
L
Tapered Bolt (short)

Assembly Instructions 3/7
Figure 2
STEP 3
Insert Bolts into pre-drilled holes of Uprights (P), then tighten.
(See Figure 2)
Attach Uprights (P) to Rail (M), then tighten.
(See Figure 3)
Orientate Rail (N) so Arrow label points
towards Uprights (P), then attach Rail (N)
to unit with Tapered Bolts.
(See Figure 4)
Figure 3 Figure 4
Bolt
M
PPPPPPP
N
Tapered Bolt
Arrow label pointing
towards Uprights (P)
STEP 4
Attach Side Frames (J) and (K) to unit with
Tapered Bolts (short), tightening bolts only halfway.
K
J
Tapered Bolt (short)

Assembly Instructions 4/7
STEP 5
Attach unit to unit from Step 2 with Flat Washers,
Spring Washers and Head Cap Bolts (long),
tightening bolts only halfway. (See Figure 5)
Tighten all bolts used in Steps 4 and 5.
Figure 5
C
Wood Screw for Hook
Hook
STEP 7
Attach unit to unit from Step 5 with Wood Screws.
(See Figure 6)
Figure 6
Q
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt (long)
STEP 6
Place Shelf (C) upside down on a soft cloth.
Attach Hooks (Q) to Shelf (C) with Wood Screws for Hook.

Assembly Instructions 5/7
M
OOOOOOO
STEP 8
Insert Bolts into pre-drilled holes of Uprights (O), then tighten.
Attach Uprights (O) to Rail (M), then tighten.
Bolt
STEP 9
Attach Posts (H) and (I) to unit with Tapered
Bolts (short), tightening bolts only halfway.
I
H
Tapered Bolt (short)
Tapered Bolt (short)
STEP 10
Place Top Frame (B) upside
down on a soft cloth.
Attach unit and Posts (F), (G) to
Top Frame (B) with Tapered Bolts (short),
tightening bolts only halfway.
G
F
B

Assembly Instructions 6/7
STEP 11
Turn unit over to it’s upright position.
Insert Tapered Bolts (long) into
pre-drilled holes of unit,
tightening bolts only halfway.
Tighten all bolts used in Steps 9, 10 and 11.
Tapered Bolt (long)
A
Head Cap Bolt (short)
Spring Washer
Flat Washer STEP 12
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with Flat Washers,
Spring Washers and Head Cap Bolts (short),
tightening bolts only halfway.
Tighten all bolts.
Figure 7
STEP 13
Attach unit to unit from Step 7 with Tapered
Bolts (short), tightening bolts only halfway.
Tighten all bolts.
Level unit by adjusting the adjustable
levelers on bottom of unit. (See Figure 7)
Tapered Bolt (short)

Assembly Instructions 7/7
Hardware List
STEP 14
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Machine Screw.
Move unit back into place.
Slide Tip-over Restraint through
Bracket on wall and Bracket on unit.
(See Figure 8)
Put tie end of Tip-over Restraint into lock
end of Tip-over Restraint and pull until tight.
M3.5x40
Wall Screw
1 pc. (+1 extra)
Figure 8
IMPORTANT
To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly.
M4x10
Machine Screw
1 pc. (+1 extra)
Machine Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tip-over
Restraint
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tip-over Restraint
1 pc. (+1 extra)
Drill 3/8” hole in wall
Top of unit

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319