DK2 Power OPD811 User manual

BIG DUMP ASSEMBLY GUIDE
MODEL: OPD811
1100 LB ELEC DUMP CART
DETAIL K2 INC.
DK2 POWER USA
4301 S Valley View Blvd STE 10-11
Las Vegas, NV 89103
1-702-331-5353
ELEC DRIVE
HYDRAULIC DUMP
ALL TERRAIN TIRES
1100LB BIG DUMP CART
REV 1 –10/16/2019
DETAIL K2, INC.
1080 Clay Avenue Unit 2
Burlington, Ontario, Canada L7L0A1
DK2 USA EAST
6245 Industrial Parkway
Whitehouse, OH 43571
PARTS AND SERVICE 702-331-5353 OR WWW.DK2POWER.COM CONTACT US
OPD811 BIG DUMP ELEC DRIVE
HYDRAULIC DUMP
Included with Carry-All

STEP 1:
Install both wheels
NOTE: UPON INSPECTION OF PARTS IF YOU FIND ANY DAMAGE OR MISSING
PARTS PLEASE CALL DK2 POWER AT 702-331-5353 OR CONTACT US VIA
OUR WEBSITE WWW.DK2POWER.COM
WE WILL REPLACE ANY MISSING PARTS TO YOU FREE
PLEASE DO NOT RETURN TO THE STORE

STEP 2:
1. Tip Bucket forward
2. Pin the lift rod
PIN THE LIFT ROD

STEP 3:
1. Assemble axle and nut

STEP 4:
1. Install the right handle assembly with 4 bolts
2. Install the left handle assembly with 4 bolts
4 BOLTS EACH SIDE

STEP 5:
1. TURN ON MACHINE
2. FORWARD AND REVERSE CONTROLS
3. BUCKET LIFT
4. BRAKE
1
3
4
2

STEP 6:
1. YOUR UNIT IS ALSO SUPPLIED WITH A CARRY ALL
2. TIP WET BUCKET FORWARD AND REMOVE BOLTS
3. SLIDE BUCKET OFF
4. REPLACE WITH CARRY ALL
REMOVE BOLTS

STEP 7:
1. ASSEMBLE THE CARRYALL
2. INSERT DUMP GATE END BETWEEN THE 2 POSTS
3. BOLT THE END POSTS INTO PLACE
4. BOLT THE REAR PANEL INTO PLACE
5. ASSEMBLE SIDES WITH HINGES, FOLD CLOSED AND LATCH
6. USE YOUR CARRYALL TO HAUL BOARDS, FEEDBAGS,
CONCRETE BAGS, GRAVEL, DIRT AND MORE.

Ref
.No.
Description
Ref
.No.2
Description
3
1
Bucket
44
M
16 lock nut
2
Handle
cover
49
Rearaxle
mud guard
3
Switch
50
Motor
hanger
4
Right
handrail
56
16
*6.5-8 wheel
5
Brake
assemble
57
Rear
axle assembly
6
Brake
fitting tube
58
Rear
axle mud guard
7
Brake
fitting flat tube
59
Rear
axle controller
8
Electric
box
60
Ø
19*Ø11*58 spacer
9
Push
bar switch
61
Rear
axle fitting plate
10
Thermal
overload
62
6002
bearing
11
Main
switch
63
Right
brake fitting
12
Brake
handle
64
Brake
connect rod
13
Backward
switch
65
Left
brake fitting
14
Brake
cable
66
6204
bearing
15
Left
handrail
67
Rear
wheels brace
16
Battery
68
95
*Ø21*Ø25 spacer
17
Battery
box bottem
69
Rear
wheel frame
18
Battery
box cover plate
70
M
16*95 screw
19
Battery
cover
71
Rear
wheel
20
Charge
point
72
Right
main frame cover plate
21
Parking
cable
73
Left
main frame cover plate
22
Bucket
fitting plate
74
Electrical
box under the baffle
23
Log
rod
75
Right
brake handle
24
Right
short rod
76
Electric
push rod switch box
25
23
*Ø12*Ø20 Spacer
77
Electric
push rod switch box cover
26
Pusher
rod
78
Small
bucket assembly
27
Left
short rod
79
Trailer
pin
28
17
*Ø11*Ø15 Spacer
80
Small
bucket back panel
29
Shocking
reduction
81
Switch
pin
30
Main
frame cover
82
Ø
3 The pipe pin
31
Rear
wheel frame
83
Ø
13*Ø17*53 compression spring
32
Main
frame
84
Ø
10*Ø27washer
33
Ø
4 cotter pin
85
Small
bucket front panel
34
Brake
cable fitting plate
86
Small
bucketfront panel right fixed tube
36
Frone
wheel brake rod
87
Small
bucketfront panel left fixed tube
37
Ø
12*26 pin axle
88
Small
bucket left plate
38
Spring
89
Hinge
fastener
39
Adjust
nut
90
Hinge
pin
40
Rearaxle
side cover
91
Small
bucket right plate
41
Bucket
rotate axle
92
Small
bottom plate
42
Parking
wire fitting plate

OPERATION –BEFORE USING YOUR DUMP CART
CLEAR AREA OF ALL PEOPLE AND PROPERTY THAT COULD BE DAMAGED.
THINK SAFETY. ALLOW STOPPING DISTANTANCE. TAKE CAR ON SLOPES AND
HILLS. ONLY ONE OPERATOR SHOULD WORK THIS UNIT. NEVER HAVE
ANOTHER PERSON RIDE IN THE BUCKET OR THE CARRYALL.
USE THE PARKING BRAKE ON HILLS.
NEVER DRIVE YOUR UNIT WITH THE BUCKET TIPPED FORWARD.
IF YOUR UNIT WILL NOT DRIVE OR DUMP –
1. CHECK THE BATTERY CONNECTIONS.
2. MAKE SURE YOUR BATTERIES ARE FULLY CHARGED.
3. TURN THE MASTER SWITCH ON THE PANEL TO ON.
4. USE THE LEFT HAND CONTROL TO DUMP THE BUCKET
5. USE THE RIGHT HAND CONTROL TO MOVE FORWARD OR REVERSE
•STAY ALERT OF YOUR SURROUNDING AND PERSONS THAT COULD APEAR IN THE
AREA WHILE YOU ARE WORKING.
•WEAR SAFETY GLASSES, GLOVES AND PROTECTIVE SHOES.
STAY CLEAR OF THE FRAME WHEN BUCKET IS CLOSING.
USE ONLY THE CHARGER PROVIDED TO CHARGE YOUR UNIT.
WEAR PROTECTIVE FOOT WEAR AND TAKE CAUTION WHEN OPERATING ON
UNLEVEL OF SLIPPERY GROUND.
NEVER LET CHILDREN OPERATE THIS EQUIPMENT.
REV 1 –9-19-2019

WHAT IS COVERED
DK2 Inc. warrants to the original purchaser of any DK2 product that it will be free and clear of manufacturing
defects in workmanship and materials under normal use and service for a period of one (1) year from the
date of the original purchase.
If within one (1) year from the original date of purchase this product fails due to defect in material or
workmanship. DK2 POWER outdoor power equipment is 1-year parts only warranty no labor.
Upon expiry of one (1) year, Detail K2 will have no further liability related to the product. Detail K2 does not
authorize any party, including its authorized distributors or dealers, to offer any other warranty on behalf of
Detail K2 Inc.
KOHLER ENGINES –KOHLER CH SERIES ENGINES COMMERCIAL 3 YR PARTS AND LABOR WARRANTY
see your Kohler manual for specific warranty.
DIESEL TRACTORS –Chassis component parts only, no labor, ENGINES –1 YR KOHLER WARRANTY
DK2 POWER OUTDOOR EQUIPMENT –1-Year parts only, no labor.
THIS WARRANTY DOES NOT COVER OR APPLY TO:
Damage to the product due to misuse, mishandling and abuse
(b) Improper installation, maintenance and storage
(c) Expendable parts such as nuts and bolts, pins and springs, wiring and switch components, hydraulic
hoses and fittings, cutting teeth, cutting chains, cutting blades, throttles, belts and tires.
(d) Normal wear and tear
(e) Consequential damage & incidental damages such as damage to persons or property
(f) Batteries
PROCEDURE FOR OBTAINING AN RETURN AUTHORIZATION
Within the one (1) year warranty period, the purchaser of the product must notify DK2 of the claimed defect
and provide proof of original purchase. At this time the validity of the claim will be determined, and if
approved replacement parts will be issued.
No returned product will be accepted under warranty unless accompanied by an RGA# issued by Detail K2
Inc.
RESOLUTION FOR A DEFECTIVE PRODUCT
DK2 POWER –Tractors, Chippers, Stump Grinders, Log Splitters, and Outdoor Power Equipment.
Call DK2 at 702-331-5353 in Las Vegas between 8am-4pm M-F Pacific Time.
PLEASE DO NOT RETURN TO THE STORE
YOU HAVE A 1 YEAR WARRANTY AND DK2 WILL REPLACE A DEFECTIVE PART FOR FREE
CALL US AT 702-331-5353 FOR FAST WARRANTY PARTS AND QUESTIONS
REV 1 –9-19-2019