Wacker Neuson DT05 User manual

Machine models DT05-P/DT05-D
Edition 2.0
Article number 1000268362
Language en
Operator’s Manual
Track dumper
DT05

Documentation
Legend
Title Language Order no.
Operator’s Manual en 1000268362
Spare parts list de/en/fr 1000271097
de/it/es 1000271098
Issue Issued
1.0 11 / 2011
1.1 12 / 2012
1.2 09 / 2013
1.3 11 / 2015
1.4 10 / 2017
1.5 10 / 2018
2.0 05 / 2022
Copyright © 2022 Wacker Neuson Linz GmbH, Hörsching
Printed in Austria
All rights reserved, in particular the copyright, the right of reproduction and the right of distribution applicable
worldwide.
This document may be used by the receiver only for the designated purpose. It may in no way be duplicated or
translated in any other language, in whole or in part, without prior permission in writing from the manufacturer.
No reproduction or translation of this publication, in whole or in part, without the written consent from
Wacker Neuson Linz GmbH.
Violations of legal regulations, in particular of the copyright protection, will be subject to civil and criminal pros-
ecution.
Wacker Neuson Linz GmbH keep abreast of the latest technical developments and constantly improve their
products. For this reason, we may from time to time need to make changes to figures and descriptions in this
documentation that do not reflect products that have already been delivered and that will not be implemented
on these machines.
Technical data, dimensions and weights are only given as an indication. Responsibility for errors or omissions
not accepted.
The cover picture may feature the vehicle with optional equipment (options).
Photographs and graphics are symbolic representations and may differ from the actual products.
The Operator’s Manual and any amendments to it must always be available at the location where the vehicle
is operated. Possible amendments are included at the end of the Operator’s Manual.
Wacker Neuson Linz GmbH
Flughafenstraße 7
A-4063 Hörsching
Phone: [phone]
Fax: [phone]-2200
E-mail: office.lin[email protected]
www.wackerneuson.com

BA DT05 EN – Edition 2.0 * BaDT05en2_0IVZ.fm I-1
Table of Contents
Table of Contents
I
Introduction
Important information on this Operator’s Manual ............................ 1-1
Overall view of vehicle .................................................................... 1-2
Brief description .............................................................................. 1-3
Definition of operator’s control stand ......................................... 1-3
Regulations ..................................................................................... 1-4
EC Declaration of Conformity model DT05-P, for vehicles with CE mark
on the type label (up to series FB05777) ........................................ 1-5
EC Declaration of Conformity model DT05-P, for vehicles with CE mark
on the type label (from series FC05835) ........................................ 1-6
EC Declaration of Conformity model DT05-D, for vehicles with CE mark
on the type label (up to series FB05880) ........................................ 1-7
EC Declaration of Conformity model DT05-D, for vehicles with CE mark
on the type label (from series FC05909) ........................................ 1-8
Type labels and component numbers ............................................. 1-9
Signs and symbols ........................................................................ 1-10
Safety instructions
Identification of warnings and dangers ........................................... 2-1
Warranty ......................................................................................... 2-1
Disposal .......................................................................................... 2-1
Designated use and exemption from liability .................................. 2-2
General conduct and safety instructions ......................................... 2-2
Organizational measures ........................................................... 2-2
Selection and qualification of personnel, basic responsibilities . 2-4
Safety instructions regarding operation .......................................... 2-5
Normal operation ....................................................................... 2-5
Applications with lifting gear ...................................................... 2-7
Trailer ........................................................................................ 2-7
Transportation ........................................................................... 2-7
Temperature ranges .................................................................. 2-7
Safety instructions for maintenance ................................................ 2-7
Warning of special hazards ............................................................ 2-9
Electrical energy ........................................................................ 2-9
Gas, dust, steam, smoke ......................................................... 2-10
Hydraulic system ..................................................................... 2-10
Noise ....................................................................................... 2-10
Oil, grease and other chemical substances ............................. 2-10
Battery ..................................................................................... 2-10
Track ........................................................................................ 2-11
Operation
Overview of control stand (type DT05-P skip) ............................... 3-2
Overview of control stand (type DT05-D skip) ................................ 3-3
Overview of the control stand (type DT05 high skip) (optional) / Loader
unit (optional)) ................................................................................. 3-4
Putting into operation ...................................................................... 3-5
Safety regulations ...................................................................... 3-5
Putting into operation for the first time ....................................... 3-5
Running-in period ...................................................................... 3-5
Check lists ................................................................................. 3-6
Start-up checklist ....................................................................... 3-6
Operation checklist .................................................................... 3-6
Parking checklist ........................................................................ 3-6
Before starting the engine ......................................................... 3-7
Table of Contents

I-2 BA DT05 EN - Edition2.0 * BaDT05en2_0IVZ.fm
Table of Contents
General information on starting the petrol engine ...................... 3-7
Procedure .................................................................................. 3-7
Manual starter ............................................................................ 3-8
When the engine has started ..................................................... 3-8
Stopping the petrol engine ......................................................... 3-8
General Informationen on starting the diesel engine ................. 3-9
Procedure .................................................................................. 3-9
Manual starter .......................................................................... 3-10
Electric starter .......................................................................... 3-10
Starting at low temperatures .................................................... 3-11
When the engine has started ................................................... 3-11
Stopping the diesel engine ...................................................... 3-12
Jump-starting the engine (supply battery) ............................... 3-13
Special instructions for driving on public roads ........................ 3-13
Starting vehicle travel .............................................................. 3-14
Drive levers .............................................................................. 3-14
Machine travel on slopes ......................................................... 3-15
Specific safety instructions ...................................................... 3-15
Transverse driving on a slope .................................................. 3-16
Driving on slopes ..................................................................... 3-16
Driving on slopes with a high-tip skip ....................................... 3-18
Skip .......................................................................................... 3-19
High-tip skip (option) ................................................................ 3-19
Loader unit operation (option) .................................................. 3-20
Machine shut-down .................................................................. 3-21
Foothold ................................................................................... 3-22
Crane-lifting the machine ......................................................... 3-23
Loading and transporting the machine .................................... 3-24
Tying down the machine .......................................................... 3-25
Towing the machine ................................................................. 3-26
Machine operation ........................................................................ 3-27
General safety instructions ...................................................... 3-27
Loader unit operation ............................................................... 3-27
Transporting with a full bucket ................................................. 3-27
Loading loose material ............................................................. 3-28
Ending loading ......................................................................... 3-28
Transporting with a full skip ..................................................... 3-29
Tilt out the skip ......................................................................... 3-30
Empty the high tip skip (optional) ............................................. 3-31
Emergency lowering of the skip ............................................... 3-31
Malfunctions
Engine malfunctions ....................................................................... 4-1
Maintenance
Introduction ..................................................................................... 5-1
Maintenance prop ...................................................................... 5-1
Maintenance strut for high-tip skip ............................................. 5-2
Fuel system .................................................................................... 5-3
Specific safety instructions ........................................................ 5-3
Checking the fuel level ............................................................... 5-3
Refuelling ................................................................................... 5-4
Draining fuel (gasoline engine) .................................................. 5-4
Draining fuel (diesel engine) ...................................................... 5-6
Stationary fuel pumps ................................................................ 5-6
Gasoline specification ................................................................ 5-7
Diesel fuel specification ............................................................. 5-7
Cleaning the fuel filter cup (gasoline engine) ............................. 5-7

BA DT05 EN – Edition 2.0 * BaDT05en2_0IVZ.fm I-3
Table of Contents
Cleaning the fuel filter (gasoline engine) ................................... 5-8
Cleaning the fuel filter of the diesel engine ................................ 5-9
Replacing the fuel filter element in the tank (diesel engine) ...... 5-9
Spark plug (petrol engine) ....................................................... 5-10
Engine lubrication system ............................................................. 5-11
Checking the oil level ............................................................... 5-11
Filling up engine oil .................................................................. 5-12
Drain engine oil ........................................................................ 5-12
Cleaning/replacing the engine oil filter (diesel engine) ............ 5-13
Air filter .......................................................................................... 5-14
Replacing the filter (gasoline engine) ...................................... 5-15
Replacing the filter (diesel engine) .......................................... 5-16
Hydraulic system .......................................................................... 5-17
Specific safety instructions ...................................................... 5-17
Checking the hydraulic oil level ............................................... 5-18
Adding hydraulic oil ................................................................. 5-18
Drain hydraulic oil .................................................................... 5-19
Replacing the hydraulic oil filter cartridge ................................ 5-19
Important information for the use of biodegradable oil ............ 5-20
Checking hydraulic pressure lines ........................................... 5-21
Tracks ........................................................................................... 5-22
Check track tension ................................................................. 5-22
Tightening the tracks ............................................................... 5-22
Decreasing track tension ......................................................... 5-23
Electrical system ........................................................................... 5-24
Specific safety instructions ...................................................... 5-24
Servicing and maintenance at regular intervals ....................... 5-24
Instructions concerning specific components .......................... 5-25
Alternator ................................................................................. 5-25
Battery ..................................................................................... 5-26
General maintenance ................................................................... 5-27
Cleaning .................................................................................. 5-27
General instructions for all areas of the vehicle ....................... 5-27
Exterior of the vehicle .............................................................. 5-28
Engine compartment ............................................................... 5-28
Threaded fittings and attachments .......................................... 5-28
Pivots and hinges .................................................................... 5-28
Fluids and lubricants ..................................................................... 5-29
Maintenance plan DT05-P (gasoline engine) ............................... 5-30
Maintenance plan DT05-D (diesel engine) ................................... 5-32
Lubrication plan DT05 with skip .................................................... 5-34
Lubrication plan of DT05 with high tip skip (optional) ................... 5-35
Lubrication plan DT05 with skip and loader unit (optional) ........... 5-36
Maintenance opening .............................................................. 5-37
Technical data
Engine (DT05-P up to series FB05777)(DT05-D up to series FB05880)
6-1
Engine (DT05-P from series FC05835)(DT05-D from series FC05909)
6-2
Hydraulic system ............................................................................ 6-3
Travel gear ...................................................................................... 6-3
Work hydraulics .............................................................................. 6-3
Electrical system ............................................................................. 6-4
Skip ................................................................................................. 6-4
High-tip skip (option) (Up to series FB04439 for the DT05-D and up to

I-4 BA DT05 EN - Edition2.0 * BaDT05en2_0IVZ.fm
Table of Contents
series FB04419 for the DT05-P) ..................................................... 6-4
High-tip skip (option) (From series FB05432 for the DT05-D and from
series FB05398 with FB04332 for the DT05-P) .............................. 6-4
Self-loading equipment (optional) ................................................... 6-5
Noise levels .................................................................................... 6-5
Vibration .......................................................................................... 6-5
Fuses .............................................................................................. 6-5
Dimensions model DT05-D with skip .............................................. 6-6
Dimensions model DT05-D with skip and loader unit (option) ........ 6-7
Dimensions model DT05-D with high-tip skip (option) (Up to series
FB04439) ........................................................................................ 6-8
Dimensions model DT05-D with high-tip skip (option) (from series
FB05432) ........................................................................................ 6-9
Dimensions model DT05-P with skip ............................................ 6-10
Dimensions model DT05-P with skip and loader unit (option) ...... 6-11
Dimensions model DT05-D with high tip skip (optional (up to series
FB04419) ...................................................................................... 6-12
Dimensions model DT05-D with high tip skip (optional) (from series
FB05398 including FB04332) ....................................................... 6-13

BA DT05 EN – Edition 2.0 * BaDT05en2_0SIX.fm I-5
Index
A
Abbreviations ........................................................................1-1
Air filter .............................................................................5-14
B
Battery master switch ...........................................................3-22
Biodegradable hydraulic oil ....................................................5-20
C
Charge function .....................................................................3-4
Check lists ...........................................................................3-6
Clean the fuel filter .................................................................5-9
Cleaning/replacing the engine oil filter ......................................5-13
Control stand overview ....................................................3-3, 3-4
Crane-lifting bracket .............................................................3-23
D
Designated use and exemption from liability ................................2-2
Drain engine oil ...................................................................5-12
Drain fuel .............................................................................5-4
Drain hydraulic oil ................................................................5-19
Driving on public roads .........................................................3-13
E
Emergency lowering of the skip ..............................................3-31
F
Filling up with fuel ..................................................................5-4
Fluids and lubricants ............................................................5-29
Fuel filter .............................................................................5-7
I
Instrument panel overview ........................................ 3-2, 3-3, 3-4
L
Legal regulations ...................................................................1-4
Lifting gear applications ..........................................................2-7
M
Maintenance
Adding engine oil ...........................................................5-12
Adding hydraulic oil ........................................................5-18
Air filter ...............................................................5-15, 5-16
Biodegradable hydraulic oil ..............................................5-20
Check the hydraulic oil level .............................................5-18
Checking the engine-oil level ............................................5-11
Cleaning ......................................................................5-27
Diesel engine maintenance plan ........................................5-32
Electrical system ............................................................5-24
Engine lubrication system ................................................5-11
Fluids and lubricants .......................................................5-29
Fuel system ....................................................................5-3
Gasoline engine maintenance plan ....................................5-30
General maintenance ......................................................5-27
Hydraulic pressure lines ..................................................5-21
Hydraulic system ...........................................................5-17
Instructions concerning specific components ........................5-25
Lubricating the lift cylinder ................................................5-37
Lubrication plan .............................................................5-34
Maintenance opening ......................................................5-37
Pivots and hinges ...........................................................5-28
Servicing and maintenance at regular intervals .....................5-24
Threaded fittings ............................................................5-28
Track maintenance .........................................................5-22
Maintenance prop ..................................................................5-1
N
Noise levels .......................................................................1-11
Notes
On this Operator’s Manual .................................................1-1
P
Putting into operation .............................................................3-2
Check lists .....................................................................3-6
Putting into operation for the first time ...................................3-5
Safety regulations ............................................................3-5
R
Running-in period ..................................................................3-5
S
Safety regulations ..................................................................2-1
General conduct ..............................................................2-2
Identification ...................................................................2-1
Lifting gear applications .....................................................2-7
Maintenance ...................................................................2-7
Special hazards ...............................................................2-9
Trailers and attachments ...................................................2-7
Transportation .................................................................2-7
Use of ...........................................................................2-5
Signs and symbols ...............................................................1-10
Spark plug .........................................................................5-10
Starting aid ........................................................................3-13
T
Tilt out the skip ....................................................................3-30
Track maintenance ..............................................................5-22
U
Use of .................................................................................3-1
Before starting the engine
3-7
Control stand overview ....................................... 3-2, 3-3, 3-4
Engine start ....................................................................3-7
Parking the machine .......................................................3-21
Starting vehicle travel ......................................................3-14
V
Vehicle
Brief description ...............................................................1-3
Loading and transporting .................................................3-24
Machine .........................................................................1-2
W
Warranty .............................................................................2-1
Index
I

I-6 BA DT05 EN - Edition2.0 * BaDT05en2_0SIX.fm
Index

BA DT05 EN – Edition 2.0 * dt05b110.fm 1-1
Introduction
1 Introduction
1. 1 Important information on this Operator’s Manual
Please store the Operator’s Manual in the storage bin under the engine
cover.
This Operator’s Manual contains important information on how to work
safely, correctly and economically with the machine. Therefore, it aims not
only at new operators, but it also serves as a reference for experienced
ones. It helps to avoid hazardous situations and reduce repair costs and
downtimes. Furthermore, the reliability and the service life of the machine
will be increased by following the instructions in the Operator’s Manual.
This is why the operator’s manual must always be kept at hand in the
machine.
The safety of the operator and other persons heavily depends on how
safely the machine is used. Therefore, carefully read and understand this
Operator’s Manual prior to the first drive. This Operator’s Manual will help
to familiarize yourself more easily with the machine, thereby enabling you
to use it more safely and efficiently.
Prior to the first drive, carefully read chapter “Safety Instructions” as well,
in order to be prepared for possible hazardous situations, as it will be too
late for it during operation. As a rule, keep the following in mind:
Careful and prudent working is the best way to avoid accidents!
Operational safety and readiness of the vehicle do not only depend on
your skill, but also on maintenance and servicing of the vehicle. This is
why regular maintenance and servicing is absolutely necessary.
Extensive maintenance and repair work must always be performed by a
technician with appropriate training. Insist on using original spare parts
when performing maintenance and repair work. This ensures operational
safety and readiness of your machine, and maintains its value.
Your Neuson dealer will be happy to answer any further questions regard-
ing the machine or the Operator’s Manual.
Abbreviations/symbols
• Identifies a list
• Subdivision within lists or an activity. Follow the steps in the recom-
mended order.
☞Identifies an activity
☞Description of the effects or results of an activity
s. fig. (w/o. fig.) = without figure
“Opt." = Optional
The abbreviation "Opt." indicates control elements or other groups of the
machine that can be installed as an option.
This symbol shows the travel direction – for better orientation in
figures and graphics
.

1-2 BA DT05 EN - Edition 2.0 * * dt05b110.fm
Introduction
1. 2 Overall view of vehicle
Fig. 1: Vehicle outside views
1 Control stand/handle
2 Tipping Trailer
3 Hydraulic motor
4 Travel drive
5 Lifting eye/tie-down point
6Chassis
7Track
8 Foothold
9 Engine cover
10 Wheel chock
11 Loader unit (option)
12
3
4
6
5
7
8
5
2
6
7
10
11
2
94
5
10
55
5

BA DT05 EN – Edition 2.0 * dt05b110.fm 1-3
Introduction
1. 3 Brief description
The DT05 dumper is a self-propelled work machine.
Get informed on and follow the legal regulations of your country.
The main components of the vehicle are:
• Tracked travel gear
• Control stand
• Internal combustion engine
• Model DT05-P: single-cylinder petrol engine (up to series FB05777)
• Model DT05-P: single-cylinder petrol engine according to the
standard EPA Tier 4 / Stage V (from series FC05835)
• Model DT05-D: single-cylinder diesel engine (up to series FB05880)
• Model DT05-D: single-cylinder diesel engine according to the
standard EPA Tier 4 / Stage V (from series FC05909)
• Tipping Trailer
• High-tip skip (option)
• Loader unit (option)
Definition of operator’s control stand
The dumper’s control stand is the:
• Foothold
• Control stand
The vehicle may only be operated from the running board and control
stand.
Danger!
The operator must not lean or reach outside the dimensions of
the vehicle. This applies in particular to their feet! Otherwise –
Accident hazard!
☞Stand on the foothold ensuring that neither your feet nor other
limbs protrude beyond the dimensions of the vehicle!
Danger!
The operator must always firmly hold onto the handle of the
control stand with both hands! Otherwise –
Accident hazard!
☞The operator is subject to high acceleration forces in particu-
lar when starting vehicle travel!
Fig. 2: Control stand

1-4 BA DT05 EN - Edition 2.0 * * dt05b110.fm
Introduction
1. 4 Regulations
Requirements to be met by the operator
Earth moving machines may be driven and serviced only by persons who
meet the following requirements:
• 18 years or older
• Physically and mentally suited for this work
• Persons have been instructed in driving and servicing the earth moving
machine and have proven their qualifications to the contractor
• Persons are expected to perform work reliably.
They have been appointed by the contractor for driving and servicing the
earth moving machine.
Observe the legal regulations of your country.

BA DT05 EN – Edition 2.0 * dt05b110.fm 1-5
Introduction
1. 5 EC Declaration of Conformity model DT05-P, for vehicles with CE
mark on the type label (up to series FB05777)
The indications specified above correspond to the existing information at time of going to press. Changes may
have been carried out in the meantime (see original declaration of conformity supplied with the vehicle). Valid for
the EU and states with legislation that is similar to that of the EU. Valid for machines with CE mark, which have
not undergone any unauthorized changes since commissioning.
Manufacturer
Messersì, Via Arceviese, 44, 60010 Casine di Ostra, Ancona - Italy
Product
Conformity assessment procedure
-
Notified body involved in procedure
Vericert SRL
Via L. Masotti, 5
48124 Fornace Zarattini (RA)
EU notification number 1878
Directives and standards
With this document we declare that this product corresponds to the applicable regulations of the
following directives and standards:
2014/30/EU, 2000/14/EC, 97/68/EG, EN ISO 12100:2010;
EN 474-1:2006 (up to 5.5.8.1, 5.8.2, 5.9, 5.19.1), EN 474-6:2010 (up to 5.7.3.3).
Authorized representative for the compilation of technical documentation
Messersì S.p.a.
Via Arceviese, 44
60010 Casine di Ostra,
Ancona - Italy
Casine di Ostra _ _•_ _•_ _ _ _
Machine designation Compact Dumper
Machine type D11-02
Trade name DT05-P
Serial number xxxxxxxx
Engine/output kW GX200UT/4.5
Measured sound power level dB(A) 97
Guaranteed sound power level dB(A) 99
Marco Vignaroli,
Managing director
EC Declaration of Conformity

1-6 BA DT05 EN - Edition 2.0 * * dt05b110.fm
Introduction
1. 6 EC Declaration of Conformity model DT05-P, for vehicles with CE
mark on the type label (from series FC05835)
The indications specified above correspond to the existing information at time of going to press. Changes may
have been carried out in the meantime (see original declaration of conformity supplied with the vehicle). Valid for
the EU and states with legislation that is similar to that of the EU. Valid for machines with CE mark, which have
not undergone any unauthorized changes since commissioning.
Manufacturer
Messersì, Via Arceviese, 44, 60010 Casine di Ostra, Ancona - Italy
Product
Conformity assessment procedure
-
Notified body involved in procedure
Vericert SRL
Via L. Masotti, 5
48124 Fornace Zarattini (RA)
EU notification number 1878
Directives and standards
With this document we declare that this product corresponds to the applicable regulations of the
following directives and standards:
2014/30/EU, 2000/14/EG, 2016/1628/EU, EN ISO 12100:2010;
EN 474-1:2006 (up to 5.5.8.1, 5.8.2, 5.9, 5.19.1), EN 474-6:2010 (up to 5.7.3.3).
Authorized representative for the compilation of technical documentation
Messersì S.p.a.
Via Arceviese, 44
60010 Casine di Ostra,
Ancona - Italy
Casine di Ostra _ _•_ _•_ _ _ _
Machine designation Compact Dumper
Machine type D11-02
Trade name DT05-P
Serial number xxxxxxxx
Engine/output kW GX200UT/4.5
Measured sound power level dB(A) 97
Guaranteed sound power level dB(A) 99
Marco Vignaroli,
Managing director
EC Declaration of Conformity

BA DT05 EN – Edition 2.0 * dt05b110.fm 1-7
Introduction
1. 7 EC Declaration of Conformity model DT05-D, for vehicles with CE
mark on the type label (up to series FB05880)
The indications specified above correspond to the existing information at time of going to press. Changes may
have been carried out in the meantime (see original declaration of conformity supplied with the vehicle). Valid for
the EU and states with legislation that is similar to that of the EU. Valid for machines with CE mark, which have
not undergone any unauthorized changes since commissioning.
Manufacturer
Messersì, Via Arceviese, 44, 60010 Casine di Ostra, Ancona - Italy
Product
Conformity assessment procedure
-
Notified body involved in procedure
Vericert SRL
Via L. Masotti, 5
48124 Fornace Zarattini (RA)
EU notification number 1878
Directives and standards
With this document we declare that this product corresponds to the applicable regulations of the
following directives and standards:
2014/30/EU, 2000/14/EC, 97/68/EG, EN ISO 12100:2010;
EN 474-1:2006 (up to 5.5.8.1, 5.8.2, 5.9, 5.19.1), EN 474-6:2010 (up to 5.7.3.3).
Authorized representative for the compilation of technical documentation
Messersì S.p.a.
Via Arceviese, 44
60010 Casine di Ostra,
Ancona - Italy
Casine di Ostra _ _•_ _•_ _ _ _
Machine designation Compact Dumper
Machine type D11-01
Trade name DT05-D
Serial number xxxxxxxx
Engine/output kW L70N6/4.9
Measured sound power level dB(A) 101
Guaranteed sound power level dB(A) 101
Marco Vignaroli,
Managing director
EC Declaration of Conformity

1-8 BA DT05 EN - Edition 2.0 * * dt05b110.fm
Introduction
1. 8 EC Declaration of Conformity model DT05-D, for vehicles with CE
mark on the type label (from series FC05909)
The indications specified above correspond to the existing information at time of going to press. Changes may
have been carried out in the meantime (see original declaration of conformity supplied with the vehicle). Valid for
the EU and states with legislation that is similar to that of the EU. Valid for machines with CE mark, which have
not undergone any unauthorized changes since commissioning.
Manufacturer
Messersì, Via Arceviese, 44, 60010 Casine di Ostra, Ancona - Italy
Product
Conformity assessment procedure
-
Notified body involved in procedure
Vericert SRL
Via L. Masotti, 5
48124 Fornace Zarattini (RA)
EU notification number 1878
Directives and standards
With this document we declare that this product corresponds to the applicable regulations of the
following directives and standards:
2014/30/EU, 2000/14/EG, 2016/1628/EU, EN ISO 12100:2010;
EN 474-1:2006 (up to 5.5.8.1, 5.8.2, 5.9, 5.19.1), EN 474-6:2010 (up to 5.7.3.3).
Authorized representative for the compilation of technical documentation
Messersì S.p.a.
Via Arceviese, 44
60010 Casine di Ostra,
Ancona - Italy
Casine di Ostra _ _•_ _•_ _ _ _
Machine designation Compact Dumper
Machine type D11-01
Trade name DT05-D
Serial number xxxxxxxx
Engine/output kW L70V6 / 4.9
Measured sound power level dB(A) 101
Guaranteed sound power level dB(A) 101
Marco Vignaroli,
Managing director
EC Declaration of Conformity

BA DT05 EN – Edition 2.0 * dt05b110.fm 1-9
Introduction
1. 9 Type labels and component numbers
Serial number
The number is located on the type label.
The type label is located at the rear left of the control stand.
Type label information (example):
Machine designation: COMPACT DUMPER
Manufacturer: (Hersteller)---------------
Model: (Modell)---------------
Model year: ---------------
Type (Fahrzeugtyp)---------------
Power: (Leistung)---------------
VIN: (Fahrgestellnummer)---------------
Max. payload: ---------------
GAWR (gross axle weight rating) front:(Zulässige Achslast vorne)-----------
----
GAWR rear: (Zulässige Achslast hinten)---------------
GWR: ---------------
Transport mass: (Transportgewicht)---------------
Operating mass: (Betriebsgewicht)---------------
Other information – see chapter 6 Technical data on page 6-1
Engine number
The type label (arrow) is located next to the oil check plug.
The type label (arrow) is located below the tank (engine).
Fig. 1: Type label: location
Fig. 3: Type label
Fig. 2: Engine number (petrol engine)
Fig. 3: Diesel engine number

1-10 BA DT05 EN - Edition 2.0 * * dt05b110.fm
Introduction
1. 10 Signs and symbols
XX
XX

BA DT05 EN – Edition 2.0 * dt05b110.fm 1-11
Introduction
The following states signs and symbols which are not unequivocally com-
prehensible. They do not contain explanatory text and are not explained in
the following chapters.
Meaning
Machine is raised by the lifting eyes
– see chapter Crane-lifting the machine on page 3-23
Application
On the chassis near the front and rear lifting eyes
Meaning
Tie-down points for tying down the machine for transport.
– see chapter Tying down the machine on page 3-25
Application
On the chassis at the front and rear anchoring points
Meaning
Noise levels produced by the machine.
LWa = sound power level
Other information – see chapter 6. 11 Noise levels on page 6-5
Application
Protective plate on control stand
Meaning
Indication of operator-perceived sound pressure level.
LPa = sound pressure level
Other information – see chapter 6. 11 Noise levels on page 6-5
Application
Protective plate on control stand
Meaning
General indication of danger
This symbol alerts persons standing or working near the machine of an
existing danger.
Application
On left and right of skip
Meaning
The CE mark means that the machine meets the requirements of the
Machine Directive and that the conformity procedure has been performed.
The machine meets all the health and safety requirements of the Machine
Directive.
Application
On the type label
Fig. 4: Lifting eye label
Fig. 5: Label for points used for tying down the
machine
Fig. 6: Noise level label
XX
Fig. 7: Label with indication of sound pressure
XX
Fig. 8: Danger label
Fig. 9: CE mark

1-12 BA DT05 EN - Edition 2.0 * * dt05b110.fm
Introduction
Meaning
Fill in petrol only! 91 octane regular
Application
On the control stand (model DT05-P)
Meaning
Add diesel fuel only!
Application
On the control stand (model DT05-D)
Meaning
The reservoir contains hydraulic oil.
– see chapter Adding hydraulic oil on page 5-18
Application
Next to the filler inlet of the hydraulic oil reservoir
Meaning
Read the Operator’s Manual before using the machine.
Application
On left and right of skip
Meaning
Use a safety prop before performing work under the skip.
Application
On left and right of skip
Meaning
General indication of danger
This symbol warns individuals who stay in the vicinity of the machine
about the general shearing risk that exists about it.
Application
On left and right of skip
Meaning
Do not touch hot surfaces, wait for parts to cool down.
Application
Near the exhaust system
Meaning
Danger due to components under spring tension! Indicates the device for
adjusting track tension.
Application
Right and left side of chassis
Fig. 10: Petrol
Fig. 11: Diesel
Fig. 12: Hydraulic oil
Fig. 13: Read and understand the Operator’s
Fig. 14: Safety prop
Fig. 15: Shearing hazard
Fig. 16: Hot surfaces
Fig. 17: Track tension adjustment