DMI Sports HT600 User manual

DMI Sports For Customer Service Call 1.800.399.4402-1-
1.800.399.4402
FAX: [phone]
Please have your model number when inquiring about parts.
Or write to:
DMI Sports
Customer Service
1300 Virgina Drive, Suite 401
Fort Washington PA, 19034
Please visit our web site at:
www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.
Congratulations on the purchase of your new DMI Sports
soccer table. Our products are designed and manufactured
to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,
PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:
Your Model Number _______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
HT600
0082008

DMI Sports For Customer Service Call 1.800.399.4402-2-
Please Keep Your Instructions! (You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this table. Please refer to the
Parts Identier on the following page and be sure that all parts have been included. Although extreme-
ly rare, occasionally a part may be missing. If you are missing a part, or if you have any questions, please
call our customer service department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and
5:00pm E.S.T; or you can reach us at: www.dmisports.com.
Do not return the game to the store. Please contact us rst at: 1.800.399.4402 or on our website at:
www.dmisports.com.
IMPORTANT!
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS HOCKEY TABLE

DMI Sports For Customer Service Call 1.800.399.4402-3-
P1
P9
P6
H3
H8
P10 P12
P16 P17
P2
P7
H4
H9
H12
P13
P3
P8
H5
H10
H13
P14
P4
H1
H6
H11
H14
P15
P5
H2
H7
P11
Tools required for assembly:
• Allen wrench - included
• Screw driver, electric screw driver preferred - not included
• Level recommended - not included
PARTS IDENTIFIER
1 Piece
Control Plug 1 Piece
“U” Bracket
Switch Box And
H15 H16
Wrench
5/16’’*1-3/4’’ Leg Bolt3/16’’ Console Bolt F4*1-3/4’’ Leg Screw
1 Piece
Side Panel With
On/Off Slot
1 Piece
56 Pieces
1 Piece
P18 P19

DMI Sports For Customer Service Call 1.800.399.4402-4-
P1
H6
H6
H6
H6
H5
H4
H4
H13
H12 H8
H4 H4
H6
H6 H6
H5
H6
H8 H8
H8
H8
H12
P2
P1
P9
P1
H12
H4 H6
H6 H5
H8
H8
H13
H8
P2
STEP 1. ATTACH APRONS
Aprons secure to the table frame with H12
and H13 brackets.
Note: Please leave the main frame face down in the carton that it ships in until the aprons and legs are
attached. All images are shown up-side-down as the table should be assembled.
Please DO NOT step or lean on frame of table while assembling the table.

DMI Sports For Customer Service Call 1.800.399.4402-5-
STEP 2. ATTACH APRON CORNER BRACKETS AND GOAL BOX
Apron corner brackets (P18) slide into place to brace four aprons together.
STEP 3. LEG ASSEMBLY
After four sides are attached to each other the leg base, P8, is attached with screws (H3).
H1
H2
P6 P6
P3
P3
P5
P5
P4
P4
H9
H9
P12
P18
P12
H10
H10
H3
P8
P6

DMI Sports For Customer Service Call 1.800.399.4402-6-
P10
P7
H6
H11
H6
H7
P11
H11
H14
H9
P10
P7
P14
P10
P10
STEP 4. ATTACH LEG
SUPPORT PANELS & LEGS
Attach legs to frame of the
table. Do not tighten until
the leg support panels are
attached to each leg.
Once support panels are
attached to legs with metal
plates (P14) legs can be
to the frame.
STEP 5. TURN TABLE OVER
Turning table over with the
assistance of at least
one adult (minimum 2 adults),
gradually lift and turn your new
hockey table over. Do not rest
the weight of the table frame
on just two legs as you are
turning table right-side-up.
STEP 6. ATTACH CONSOLE
Wire the console to each goal
and then plug the power cord
in to test that scoring matches
the console can be secured with
screws H7.

Power Plug
Plug Box
Blower Plug
P17
H9
P19
STEP:6
STEP:7
•Attach the On/Off Switch (P17) to the Side Apron (P9) using Screws (H9).
•Insert the adapter (P16) into the Plug Box and secure using the “U” Bracket (P19) and two screws (H9).
•Insert the Blower Motor plug into the Plug Box.
Connect goal sensor wires, console wire, adapter wire and rail light wires to junction box as shown.
H9
DMI Sports For Customer Service Call 1.800.399.4402-7-
P11
P16
Lighting Junction Box
Lighting
Goal Sensor Wire
Lighting
Goal Sensor Wire
P16

P1
P2
P3
P4
P5
P6
P7
P8
H1
H2
H3
H4
H5
H6
H7
H8
H9
H10
H11
P10
H12
H13
H14
H15
H16
P11
P12
P13
P14
P15
P16
P18
P19
P20
P21
PART# DESCRIPTION UNIT
PRICE TOTAL AMOUNT
Subtotal:
PA Residents Add 6% State Sales Tax:
Shipping and Handling Charges:
TOTAL:
PARTS RE-ORDER FORM HT600 Hockey Table
DATE:
NAME:
ADDRESS:
CITY:
PHONE:
STATE: ZIP CODE:
Send this form along with your
check or money order payable to:
DMI SPORTS
1300 Virginia Drive, Suite 401
Fort Washington, PA 19034
www.dmisports.com
SHIPPING AND HANDLNG:
Up to $12.00 add $2.00 for S&H
Over $12.00 add $8.00 for S&H
QTYREF
1
2
4
4
4
4
2
4
24
24
16
12
12
36
2
96
52
24
12
4
4
12
12
8
1
2
4
4
4
1
1
1
1
2
RPHT600-SPANEL
RPHT600-EPANEL
RPHT600-LLEG
RPHT600-RLEG
RPHT600-MLEGA
RPHT600-MLEGB
RPHT600-LEGPANEL
RPHT600-LEGBASE
RPHT600-BOLT28
RPHT600-WASHR19
RPHT600-SCREW2
RPHT600-BOLT1.5
RPHT600-HEXNUT
RPHT600-WASHR
RPHT600-BOLT3/16
RPHT600-SCREW15
RPHT600-SCREW12
RPHT600-SCREWF4
RPHT600-SCREW5/16
RPHT600-CORNER
RPHT600-LEGLEV
RPHT600-UBRACKET
RPHT600-LBRACKET
RPHT600-LEGPLATE
RPHT600-CONSOLE
RPHT600-GOALBOX
RPHT-PUSHER
RPHT-FELT
RPHT-PUCK
RPHT600 -ALLENKEY
RPHT600 -WRENCH
RPHT600-ADAPTER
RPHT600-Lighting Box
RPHT600-Sensor Wire
Side Panel
End Panel
Left Leg Panel
Right Leg Panel
Middle Leg Panel-A
Middle Leg Panel-B
Leg End Panel
Leg Base
1/4”*28MM Bolt
1/4”*19MM Washer
F4* 2” Screw
5/16” * 1-1/2’’ Bolt
5/16” Hex Nut
5/16” * 19MM Washer
3/16” Bolt
T4 * 15MM Screw
T4 * 12MM Screw
F4* 1-3/4” Leg Screw
5/16” * 1-3/4” Leg Bolt
Apron Corner
Leg Leveler
“U” Plastic Bracket
“L” Plastic Bracket
Metal Leg Plate
Console
Goal Box
Deluxe Power Pusher
Hockey felt
Puck
Allen Key
Wrench
Adapter
Lighting Junction Box
Goal Sensor Wire
25.00
P9 1 RPHT600-SPANEL Side PanelWith on/o slot 25.00
20.00
12.00
12.00
12.00
12.00
15.00
10.00
.50
.25
.50
.50
.25
.25
.50
.50
.50
.50
.50
5.00
5.00
3.00
1 RPHT600-UBRACKET “U” Bracket 3.00
20.00
5.00
3.00
1.00
45.00
5.00
4.50
.50
2.50
1.00
1.00
15.00
P17 1 RPHT600-SWITCH Switch Box And Control Plug 15.00