DMI Sports FT500GF User manual

DMI Sports For Customer Service Call 1.800.399.4402
1.800.399.4402
FAX: [phone]
Please have your model number when inquiring about parts.
Or write to:
DMI Sports
1300 Virginia Drive, Suite
401, Fort Washington PA,
19034
Please visit our web site at:
www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.
Congratulations on the purchase of your new DMI Sports
Soccer table. Our products are designed and
manufactured to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,
PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:
Your Model Number
_______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
FT500GF
0432013

DMI Sports For Customer Service Call 1.800.399.4402
Please Keep Your Instructions!
(You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this table. Please refer to the
Parts Identifi er on the following page and be sure that all parts have been included. Although extreme-
ly rare, occasionally a part may be missing. If you are missing a part, or if you have any questions, please
call our customer service department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and
5:00pm E.S.T; or you can reach us at: www.dmisports.com.
Do not return the game to the store. Please contact us fi rst at: 1.800.399.4402 or on our website at:
www.dmisports.com.
IMPORTANT!
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS SOCCER TABLE
DMI Sports For Customer Service Call 1.800.399.4402-2-DMI Sports For Customer Service Call 1.800.399.4402

DMI Sports For Customer Service Call 1.800.399.4402
PARTS IDENTIFIER
HARDWARE PARTS
A1
A2
Sand Blasted Ball
RPFT-BALL
Qty.
2
Qty.
1
ACCESSORY
PARTS
DMI Sports For Customer Service Call 1.800.399.4402
-3-
DMI Sports For Customer Service Call 1.800.399.4402
H
1
H
2
H
3
H
4
Qty.
20
Qty.
20
Qty.
2
2
TOOLS REQUIRED FOR ASSEMBLY:
•
Phillps Head Screw driver
-
Not Included
• Level recommended-
Not Included
•
Allen
Wrench
- Included
H
5
H
6
H
7
H
8
Qty.
6
Qty.
26
Qty.
8
Qty.
8
Qty.
26
5/16” x 2.5” Bolt
RPFT500GF-HKIT
5/16”
Washer
RPFT500GF-HKIT
F4 x 1” Screw
RPFT500GF-
HKIT
Lock Nut
RPFT500GF-
HKIT
T5 x
15MM Screw
RPFT500GF-
HKIT
1/2” Screw
RPFT500GF-
HKIT
P4 x 1.5 Screw
RPFT500GF-
HKIT
#8 x 1.375 Screw
RPFT500GF-
HKIT
5mm Allen Wr
emch
RPFT-5MMTOOL

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
-4-
DMI Sports For Customer Service Call 1.800.399.4402
P8
Qty.
2
ASSEMBLY
PARTS
P
1
P
2
P
3
P
4
P
5
P
6
P
7
Side
Panel
RPFT500GF-SPANL
Qty.
1
Qty.
1
Qty.
2
Qty.
1
Qty.
1
Qty.
4
Qty.
2
P
16
Qty.
8
P
9
P
10
P
11
P
12
P
13
P
14
P
15
Qty.
2
Qty.
4
Qty.
2
Qty.
16
Qty.
16
Qty.
16
Qty.
8
P
17
P
1
8
P
1
9
P
20
Qty.
2
Qty.
2
Qty.
4
Qty.
1
2
End
Panel
RPFT500GF-E
PANL
Home Player
RPFT500GF-HOME
Goal Flex
80
Cons
ole
RPGF80-CON
SOLE
Leg
RPFT500GF-LEG
Play Fi
eld
RPFT500GF-FIELD
L
eg Levelers
RPFT500GF-LEV
Ball Entry
RPFT500GF-ENTRY
Side Ramp
RPFT500GF-SRAMP
Left End Ramp
RPFT500GF-LRAMP
5 Player Rod
RPFT500GF-5ROD
2 Player Rod
RPFT500GF-2ROD
Right End Ramp
RPFT500GF-RRAMP
Bumper
RPFT-BUMPER
Steel Washer
RPFT500GF-SWASH
Plastic Washer
RPFT500GF-PWASH
Wooden Handle
RPFT500GF-HANDL
Rod End Cap
RPFT500GF-CAP
Three Player Rod
RPFT500GF-3ROD
Away Player
RPFT500GF-
AWAY
PARTS IDENTIFIER
P
2
1
Qty. 1
2
P
22
Qty.
2
Cup Holder
RPFT500-CUPHOLD
Scorer End
Panel
RPFT500GF-E
PNL2
P23
Adapter
RPGF80-ADAPTER
Qty.
1

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402-5-DMI Sports For Customer Service Call 1.800.399.4402
ASSEMBLY
STEP
1
.
Start by assembling the table frame.
Start by assembling the table frame.
Secure the
Side Panels (P3) to
the End
Panel (P
Panel (P
1
)
using Bolt (H1), Washer (H2) and Screw (H8).
using Bolt (H1), Washer (H2) and Screw (H8).
Once you have secured End panel (P1) to the Side
Once you have secured End panel (P1) to the Side
panels, place the Playing Field (P4), playing surface
panels, place the Playing Field (P4), playing surface
facing down, between the three panels
facing down, between the three panels
carefully
slot the play surface into the channel
slot the play surface into the channel
on the Goal Flex™ goal housing.
It is critical that the play surface is
It is critical that the play surface is
fi tted snuggly in the housing so
that ever
ything fi ts properly.
Once the play surface is secured
within three sides of cabinet
Scorer End Panel (P2) can be installed with
Scorer End Panel (P2) can be installed with
careful attention to fi tting the play surface
careful attention to fi tting the play surface
into
Goal Flex™ housing channel.
STEP
2
.
Once the End and Side
panels are assembled and
panels are assembled and
the
Playing Field i
s in place, secure th
s in place, secure th
e playing fi eld
using Screws (H3). B
e sure to in
e sure to in
se
rt screws straight
down so as not to damage the
down so as not to damage the
Playing fi eld.
P
4
P
1
H
8
H
2
H
1
P
3
H
3
FIG. 1.1
FIG. 1.1
FIG. 2.1
No
te:
Please assemble cabinet on packing material
. Hard fl oors may damage the panels
and carpeting may get
caught between panels while the table is being assembled.
P
1
P
2

DMI Sports For Customer Service Call 1.800.399.4402
DMI Sports For Customer Service Call 1.800.399.4402
-6-
DMI Sports For Customer Service Call 1.800.399.4402
H1
H2
P6
P
10
H
1
H
2
ASSEMBLY
STEP
3
.
With the table rema
in
ing
the up-side-down position
attach the legs to the frame assembly using Bolts
attach the legs to the frame assembly using Bolts
(H1) and Washers (H2)
as shown in Fig
as shown in Fig
ure 3.1. Once
all of the legs are a
ttached and fi rmly secured attach
ttached and fi rmly secured attach
the Leg levelers (P10).
FIG. 3.1
STEP
4
.
With at least two adults, carefully turn the
table over
onto the leg levelers.
Each End Ramp (P7-P9) has an adhe
sive side,
on which you will apply
to the
edges of the
Playing Field (P4). Simply peel
and remove
the protective la
yer
from the underside of
each End Ramp and place them in
the designated l
ocation as illustrated in
Figure 4.1.
P9
P8
P7
P9
P8
P7
FIG. 4.1
P
rotective la
yer
rotective layerrotective la

DMI Sports For Customer Service Call 1.800.399.4402
-7-
DMI Sports For Customer Service Call 1.800.399.4402
-7-
DMI Sports For Customer Service Call 1.800.399.4402
ASSEMBLY
STEP
5
.
Now you can assemble the
Pla
yer Rods (P17-P19). First slide the end of the player rod
without the hole
on the end, through one side of the Side
P
anel (P3) hole. Add a
Plastic Washer (P14),
Bumper (P12), Steel
Washer (P13), Home or
Away Men (P21) or (P
22
)
,
(depending on which ro
d you are assembling)
another
ste
el
washer
,
washer, washer
bumper and plastic washer before continuing the rod th
rough the opposite side of the side
panel. Secure the men in place with Bolt (H7) and Nut (H5) as shown in Figure 5.2. Apply the Handle (P15)
to the end of the player rod with the hole through it using Screw (H6). If done correctly, while standing in
playing position, your men should be facing your right.
Continue th
is step f
or all of the Player rods in the following order:
is step for all of the Player rods in the following order:is step f
Off ensive
3 player rod,
Off ensive
2
player rod,
De
fensive
3 player rod,
Off ensive
5
player rod,
De
fensive
5
player rod,
Off ensive
3 player rod,
De
fensive
2
player rod,
De
fensive
3 player rod
Once the rods are assembled correctly, add the Cup holders (P22).
Notice the face on the “front”
Notice the face on the “front”
of the men. This side should face
of the men. This side should face
the opposing goal.
P16
P15
P15
H6
P15
P19
H4
P11
P17
P18
P14
P1
4
FIG. 5.1
FIG. 5.1
FIG. 5.
FIG. 5.
2
P12
P14
P1
3
H7
H5
STEP
5
.
Connecting the Console:
Run the goal rail wir
es up through the pre-drilled hole and connect the
wires to
the
console w
ires.
Now
a
ttach
the Goal Flex console (P5) to the Scorer
End Panel (P2) using Screw (H3).
P
5

DMI Sports For Customer Service Call 1.800.399.4402
H1
H2
H3
H4
H5
H6
H7
H8
A1
A2
P1
P2
P3
P4
P5
P6
P7
P8
P
9
P10
P
11
P12
P1
3
P14
P15
P16
P1
7
P18
P19
P20
P21
P22
P23
RP
FT
5
00GF-
HKIT
RP
FT500GF
-
HKIT
RP
F
T500GF
-
HKIT
RP
FT
500GF-
HKIT
RP
FT500GF
-
HKIT
RP
FT500GF
-
HKIT
RP
FT500GF
-
HKIT
RP
F
T
500GF-
HKIT
RP
FT
-
FT-FT
BALL
RP
FT
-
FT-FT
5MMTOOL
RP
FT
500GF
-
E
PANL
RPFT500GF-EPNL2
RP
FT500GF-
S
PANL
RP
FT500GF-
FIELD
RPGF80-CONSOLE
RP
FT500GF-
LEG
RP
FT500GF-
LRAMP
RP
FT500GF-
R
RAMP
RP
FT500GF-SRAMP
RP
FT
500GF-
LEV
RP
FT500GF-
ENTRY
RP
FT500GF-
BUMPER
RP
FT500GF-S
WASH
RP
FT500GF-
PWASH
RP
FT500GF-
HANDL
RP
FT500GF-
CAP
RP
FT
5
00GF-5ROD
RP
FT
500GF-2ROD
RP
FT
500GF-3ROD
RP
FT500GF-
AWAY
RP
FT
500GF-HOME
RPFT500GF-CUPHOLD
RPGF80-ADAPTER
5/16” x 2-1/2” Bolt
5/16” Black Washer
F4 x 1” Screw
1/2” Screw
Lock Nut
T5 x 15MM Screw
#8 x 1.375” Screw
P4 x 1.5” Screw
Sand Blasted Ball
5mm Allen Wr
ench
End
Panel
Scorer End Panel
Side
Panel
Playing Field
Playing Field
Goal Flex™ 80 Console
L
eg
Left End Ramp
Right End Ramp
Side Ramp
Leg Leveler
Leg Leveler
Ball Entry Cup
Rubber Rod Bumper
Steel Washer
Plastic Washer
Handle
Rod Cap
5 Player Rod
2 Player Rod
3 Player Rod
3 Player Rod
Away Player
Away Player
Home Player
Cup Holder
Goal Flex™ 80 Adapter
UNIT
PRICE
TOTAL
AMOUNT
Subtotal:
PA Residents Add 6% State Sales Tax
:
Shipping and Handling Charges:
TOTAL:
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
PARTS RE-ORDER FORM
FT500GF
Soccer
Table
DATE:
NAME:
ADDRESS:
CITY:
PHONE:
STATE:
ZIP CODE
:
Send this form along with your
check or money order payable to:
DMI SPORTS
1300 Virginia Drive, Suite
401, Fort Washington, PA
19034
www.dmisports.com
.75
.25
.75
.25
.25
.25
.25
.25
2.50
1.00
49.00
49.00
30.00
25.00
59.00
5.00
1.00
.50
3
.00
5.00
3.00
1.00
1
.00
1.00
1.00
.50
5.00
5.00
5.00
5.00
2.00
3.00
10.00
SHIPPING AND HANDLING:
Up to $15.00 add $2.00 for S&H
Over $15.00 add $8.00 for S&H
Console add $5.00 for S
&H
Home Player
REF
PART #
DESCIPTION
QTY