INITIAL DISPLAY AND FUNCTION
1. SETTING DISPLAY AND FUNCTION
1) DISPLAY:
PRESS SET KEY OVER 3 SECONDS.
2) MENU MOVING :
PRESS SET KEY AND CHOOSE THE SETTING MENU.
3) SETTING :
PRESS +/- AND CHANGE. WHEN THE PRESS OVER.
F-B SET : BACKWARD SPEED. SETTING BY +/- KEYS.
B-F SET : FORWARD SPEED. SETTING BY +/- KEYS.
HEAD C/L : THE TIMING RANGE IS 1HOURS~99HOURS.
IN CASE OF THE “-”, THE HEAD CLEANIN IS
TURN OFF STATUS.
LAMP SAFE : THE HALOGEN LAMP IS TURN OFF,
WHEN THE PRINTING IS STOPPED OVER THAN
THE PRINTING SETTING TIME,
WHEN THE SETTING THE TIME ITS AUTOMATICALLY
TURN ON/OFF BY PRINTING READY/PRINING FINISH.
“-”ON DISPLAY, THE HALOGEN LAMP IS NOT
CONTROLLED. (KEEP THE TURN OFF STATUS)
*WHEN THE USER WANTS TO CONTROLL THE HALOGEN LAMP,
PRESS ON 1.
AUTO TIME : IT MEANS ‘AUTO PRINT TIME’, WHEN THE DATA
SEND BY PC, AND THE PRINTING IS READY THE
PRINTING IS AUTOMATICALLY PROGRESSING BY
SETTING TIME.
FEED TYPE : WHEN THE SET THE AUTO / DIRECT.
AUTO TIME IS ON AVAILABLE, IT IS WORKING WITH
AUTOMATICALLY HEIGHT CONTROLL(AUTO) OR
WITHOUT AUTOMATIC HEIGHT CONTROLL(DIRECT)
*WHEN THE SET THE AUTO MIME AS “-” THE FEED TYPE IS
NOT INFLUNCED.
*TIP
PRESS AT THE SETTING DISPLAY, THE SPEED OF FORWARDING,
BACKWARDING IS CHANGED. TO MAKE SURE THAT CONFIRM,
SET THE SAME THE SAME SPEED OF F-B, / B-F SET AT THE
TURN OFF STATUS AND CHECK THE MOVING.
2. LED DISPLAY
1) POWER DISPLAY :
IT INDICATES PRINTING STATUS AS RINTING READY.
WHEN ITS TURN OFF IT MEANS THE PRINTING IS
PROCESSING.
2) SET DISPLAY :
WHEN THE CHANGE THE SETTING MEASUREMNET.
IN OTHER CASE, ITS TURN OFF.
3) INK :
IT INDICATES INK STATUS, AND HEA CLEANING
MOVEMENT.
4) PAPER :
IT INDICATED IN INITIAL PRINTING STATUS,
PRESS (6) OR (7) AND BEGIN TO PRINT. IT ALSO
INDICATES ON LOCK DISARM.
5) INK + PAPER :
WHEN THE 2 LED IS PARKED, THE PRINTING COULD
BE ERROR. PRESS TURN OFF AND RESTART.
3. BUTTON FUNCTION
1) PRINTER POWER :
(1) BEGIN THE PRINTER AT THE POWER ON STATUS.
THE BUTTON FUNCTION IS AVAILABLE DURING
THE INITIAL MOVING DRIVED PROCESS.
(2) WHEN THE PRINTER IS TURN ON, IT CONTROLL
THE HALOGEN LAMP`S TURN ON / OFF
(3) ON SETTING DISPALY, IT DISPLAYS THE MOVING
DIRIVE STATUS AND IT IS NOT DISPALY IT THE
MOVING DRIVE STATUS WHEN THE PRESS AGAIN.
2) FORWARDING :
THE FLATBED IS FORWARDING ON THE BACKWARDING
SATUS.
IT STOPPED WHEN PRESS AGAIN.
3) BACKWARDING :
THE FLATBED IS BACKWARDING ON THE FORWARDING
SATUS.
IT STOPPED WHEN PRESS AGAIN.
(1) IT MOVES AS A ITS LENGTH ON TURN OFF THE
PRINTER (PRINTING READY LOCATION)
(2) IT MOVES TO HEIGHT LOCATION AT TURN ON
PRINTER
4) UP :
IT MOVES UP MANUALLY. MOVING TO HEIGHT UP
SENSOR IS RECOGNIZED.
5) DOWN :
IT MOVES DOWN MANUALLY. MOVING TO HEIGHT
DOWN SENSOR IS RECOGNIZED.
