DMtex S9000 User manual

ISO 9001:2008 Certified Company
№ 34, етаж 5,
Теl: [phone]
e-mail :[email protected]
web : www.dm-teh.com
Address :16 Nikolay Haytov Str.
5800 Pleven, Bulgaria
Instruction manual
CONVENTIONAL SOUNDER
S9000
1. INTRODUCTION
S9000 is applicable for sound and flash LED indication of events registered in Fire Alarm Systems. S9000 is
compliant with EN54-3. The sounder is connected a two-wire cable on a base B9000. After being mounted on its
base, the sounder must be locked.
2. TECHNICAL DATA
–Power supply: 9-30 V DC
–Alarm state current: max.60 mА/24V DC
–Sound level, type “Slow whoop” on 1m: 94dB /24V DC
–Frequency, pattern “Slow whoop”: 0.5 –1,2 kHz
–Flash light signalling: red
–Connection to fire detector: two-wire line
–Degree of protecion: IP 40
–Operational temperature range: minus 15ºС to 70ºС
–Relative humidity resistance: (93 ± 3)% at 40ºС
–Dimensions: Øф100mm / h≤52mm
–Weight: 0.100g
3. MOUNTING THE SOUNDER
–Choose the place (according to the plans of the project) for the installation of the sounder ;
–Mount the base with appropriate fixings ;
–Connect the electrical cables according to the attached diagram ( Figure 1) ;
When connected to a controllable output of Fire Panel

Instruction manual S9000
Fig.1
–Place the detector base and rotate clockwise till matching markers;
–Lock of the of the sounder:
Pre remove the key from the base ( Figure 2).
Break the plastic at the specified location on the bottom of the sounder ( Figure 3 ).
Fig.2 Fig.3 Fig.4
Place the sounder base and rotate it.
–If the sounder is locked to the base, to unlock it, insert first the key to the specified location
(Fig. 4) and rotate the sounder counterclockwise;
–
4. WARRANTY
The warrant period is 36 months from the date of purchase, providing that the requirements stated in the
service schedule have been observed.