Dog Care SHORT SWEET DG01 User manual

User Manual
Model: DG01

Ease into Nail Grinding
DogCare’s Guide to
Stress-Free Nail Grinding
Best Timing
Some pets do get anxious when it comes to nail trimming, so it is important to
choose a time when your pet is relaxing. It can be helpful to have your pet lie
on his/her side, which makes the paw-handling training easier.

Paw Handling
You need to get your pet used to having his/her paws touched handled before
introducing the nail grinder. Massage the paw gently and touch the nails while
offering your pet treats. Repeat this exercise a few times daily until your pet
shows no resistance.
Check the Paws for Abnormalities
While you’re at it, check the paws for debris, ticks, odd nail
color, or any signs of injury. Bring any wounds to the
attention of your veterinarian before you attempt to trim the
nails.

Introduce the Nail Grinder
Gradually train your pet to be comfortable
with the nail grinder.

Let your pet sniff the nail grinder while it is
turned off. Offering treats to help your pet
associate the grinder with rewards.

Turn the grinder on and run it near your pet’s ear for him/her to
get used to the sound.

Safety Tips
3
When your pet start to feel comfortable with the nail grinder turned on, try
holding the grinder near your pet’s paw. Do not do any actual grinding yet.
You may need to repeat the above steps a few times until your pet
consistently remains calm with the grinder.
Identify the Quick
Before grinding your pet’s nails, you need
to be able to identify the quick of the nail.
The quick is the soft core of the nail. The
quick is very sensitive because it contains
blood vessels and nerve endings. Should
you accidentally cut or grind into the
quick, the nail will start to bleed and it is
painful for your pet.




For light-colored nails, the quick is usually pink. For dark-colored nails, the
quick is usually a dark spot, which is harder to see. In both cases, turning on
the auxiliary lighting helps to better observe the quick.
A rule of thumb for the proper angle at which to trim a pet’s
nails is 45 degrees upwards from the bottom of the paw.
Grind a little at a time, and keep checking for the quick.
3

4
In case you accidentally grind into the quick, you can
use styptic powder to stop the bleeding.
Secure Your Pet
Your pet may become nervous in the presence
of the nail grinder so it is best to secure your
pet. Since you will need both hands to grind the
nails, it may be helpful to ask another person
who is familiar with your pet to assist in
restraining your pet.

How to Use DogCare
Smart Pet Nail Grinder
Keep Hair away from
the Grinding Wheel
If pet hair is accidentally caught in the nail grinder, immediately
turn off the grinder and untangle the hair. For pets with
particularly long hair, it is recommended to keep the protective
cap on and grind through one of the openings.
Turn on the nail grinder and select a
power mode. Use the Smart mode for
most nail grinding needs. Use the Quiet
mode for particularly skittish pets. Use the
Turbo mode for large dogs.
Keep the nail grinder away from the nail
when turning on, or the grinder may grab
the nail cause loss of control or injury.

Hold a paw with your non-dominant hand and spread the toes.
Carefully hold back fur so you can access the nails. Hold the grinder in your
dominant hand and get your pet used to the sound.
Support the paw in one hand while operating the nail grinder in the other hand.
This is more comfortable for your pet as it lessens vibration on the paw.
Press the grinding wheel lightly against the nail for 2-3 seconds at a
time. Use a continuous side-to-side motion when grinding each nail. Holding
the tip in one place too long can cause unevenness and overheating.
Do not keep the grinding wheel against the nail for longer than 3 seconds at a
time.